POWER STRIP 6-OUTLET W 6-PORT USB CHARGING 5-15R 10FT CORD 36IN

36 in. Power Strip Provides 6 AC Outlets and 6 USB-A Charging Ports

Compatible with standard electrical equipment, this UL-listed power strip has a 36-inch aluminum housing with a durable black finish. There are a total of six NEMA 5-15R outlets and six USB-A charging ports; each one-foot section has two outlets and two charging ports. The outlets are placed at a right angle to prevent connected power cords from blocking access to the adjacent outlet. In the event of an overload, a 15-amp resettable circuit breaker immediately shuts down the power strip to prevent equipment damage.

Charge Up to 6 Mobile Devices with 9.3A of Shared Power

In addition to AC outlets, this power strip provides USB charging for up to six mobile devices, including tablets, e-readers and smartphones. Each pair of USB-A charging ports provides up to 3.1 amps of shared power. The USB ports eliminate the need for AC adapters for charging cords, leaving outlets available for AC equipment.

Place Outlets and Charging Ports Away from the Power Source

The PSC360610USBB has a 10-foot cord, so you can mount it away from its AC wall outlet or other power source. The cord has a NEMA 5-15P plug.

Use Optional Mounting Clamps to Add Flexibility to Horizontal Installations

If drilling mounting holes is not possible or desirable, use the included heavy-duty C-clamps to mount the power strip. The clamps attach to the edge of a desk, table, workbench or other solid, flat surface up to 2.25 inches thick. Slide the clamps onto the edge of your surface, hand tighten the adjustment knobs and snap the power strip into the built-in mounting clips. No drilling is required. It is easy to relocate the installation because there are no fasteners to remove. The PSC360610USBB also comes with clips for vertical or horizontal surface-mounting to a wall or workbench.


Typical Applications
• Distribute power to computer equipment and other devices in an office, workbench, industrial, retail or telecom environment
• Clamp mount a power strip to the edge of a desk or workbench for easy access to outlets and USB charging ports
• Provide outlets and USB charging ports at a trade show booth without permanently mounting the power strip

Package Includes
• PSC360610USBB 6-Outlet Power Strip with USB-A Charging
• (2) Mounting clamps with clips
• (2) Mounting clips for surface-mounting
• Owner’s manual

36 in. Power Strip Provides 6 AC Outlets and 6 USB-A Charging Ports

Compatible with standard electrical equipment, this UL-listed power strip has a 36-inch aluminum housing with a durable black finish. There are a total of six NEMA 5-15R outlets and six USB-A charging ports; each one-foot section has two outlets and two charging ports. The outlets are placed at a right angle to prevent connected power cords from blocking access to the adjacent outlet. In the event of an overload, a 15-amp resettable circuit breaker immediately shuts down the power strip to prevent equipment damage.

Charge Up to 6 Mobile Devices with 9.3A of Shared Power

In addition to AC outlets, this power strip provides USB charging for up to six mobile devices, including tablets, e-readers and smartphones. Each pair of USB-A charging ports provides up to 3.1 amps of shared power. The USB ports eliminate the need for AC adapters for charging cords, leaving outlets available for AC equipment.

Place Outlets and Charging Ports Away from the Power Source

The PSC360610USBB has a 10-foot cord, so you can mount it away from its AC wall outlet or other power source. The cord has a NEMA 5-15P plug.

Use Optional Mounting Clamps to Add Flexibility to Horizontal Installations

If drilling mounting holes is not possible or desirable, use the included heavy-duty C-clamps to mount the power strip. The clamps attach to the edge of a desk, table, workbench or other solid, flat surface up to 2.25 inches thick. Slide the clamps onto the edge of your surface, hand tighten the adjustment knobs and snap the power strip into the built-in mounting clips. No drilling is required. It is easy to relocate the installation because there are no fasteners to remove. The PSC360610USBB also comes with clips for vertical or horizontal surface-mounting to a wall or workbench.


Typical Applications
• Distribute power to computer equipment and other devices in an office, workbench, industrial, retail or telecom environment
• Clamp mount a power strip to the edge of a desk or workbench for easy access to outlets and USB charging ports
• Provide outlets and USB charging ports at a trade show booth without permanently mounting the power strip

Package Includes
• PSC360610USBB 6-Outlet Power Strip with USB-A Charging
• (2) Mounting clamps with clips
• (2) Mounting clips for surface-mounting
• Owner’s manual

• PSC360610USBB: Eaton Corporation: OEM Acquisition