OEM#: PDUMH30ATNETNew OEM Original Outright

PDU SWITCHED ATS 120V 30A 24 5-15/20R; 1 L5-30R 2 L5-30P 2URM by Tripp Lite

Your price:
$1,579.73 each
$1,761.56 Savings: $181.83 (10%)
Estimated to ship by 12/27 if ordered before 12:30 PM EST
PDU SWITCHED ATS 120V 30A 24 5-15/20R; 1 L5-30R 2 L5-30P 2URM by Tripp Lite
PDU SWITCHED ATS 120V 30A 24 5-15/20R; 1 L5-30R 2 L5-30P 2URM by Tripp Lite
PDU SWITCHED ATS 120V 30A 24 5-15/20R; 1 L5-30R 2 L5-30P 2URM by Tripp Lite

OEM#: PDUMH30ATNET
PDU SWITCHED ATS 120V 30A 24 5-15/20R; 1 L5-30R 2 L5-30P 2URM by Tripp Lite

New OEM Original Outright
Your price:
$1,579.73 each
$1,761.56 Savings: $181.83 (10%)

2.9kW Single-Phase ATS / Switched PDU, LX Platform Interface, 120V Outlets (24 5-15/20R, 1 L5-30R) 2 L5-30P, 2 10ft Cords, 2U Rack-Mount, TAA

Estimated to ship by 12/27 if ordered before 12:30 PM EST
Asset Information

2-Year Limited Warranty

Product Overview

Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Highly reliable solid-state switching between primary and secondary inputs occurs in 1-5 milliseconds. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability. Built-in LX Platform network management interface card. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring andemail notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. OptionalEnviroSense2 modules (sold separately) provide a variety of environmental monitoringcapabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3,telnet, SSH, FTP, DHCP and NTP.

    Package Includes:
    • ATS / Switched PDU with two L5-30P inputs
    • Installable 2U mounting brackets
    • Operating manual

Features
  • 2U rackmount, 2 L5-30P inputs, 25 switched outlets (24 5-15/20R, 1 L5-30R)
  • Built-in LX Platform Network Interface
  • Digital meter reports voltage, kW load level and output amperage in 4 load segments
  • Enables redundant A/B power option for non-redundant network devices
  • Individually switched outlets and built-in network interface enables remote control and monitoring
  • Single phase 30A 120V Auto Transfer Switch / ATS PDU; Highly reliable Solid State Switching
  • TAA Compliant
Technical Specs
P/N: PDUMH30ATNET Key Specs
Item
PDU SWITCHED ATS 120V 30A 24 5-15/20R; 1 L5-30R 2 L5-30P 2URM
OEM
Tripp Lite
OEM #
PDUMH30ATNET
Condition
New OEM Original
Returnable
No
Warranty
Other (See Notes)
Dimensions (WxDxH)
17.5 in x 12.5 in x 3.5 in
Input Connectors
2 x power NEMA L5-30
Input Voltage
AC 100/120/127 V
Networking
Ethernet
Output Voltage
AC 120 V
Output connectors
24 x power NEMA 5-15/20 - 1 x power NEMA L5-30
Power Capacity
2.9 kW
Rack Size
2U
Remote Management Protocol
SNMP, HTTP
Weight
13.89 lbs
Equivalents

Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Highly reliable solid-state switching between primary and secondary inputs occurs in 1-5 milliseconds. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability. Built-in LX Platform network management interface card. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring andemail notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. OptionalEnviroSense2 modules (sold separately) provide a variety of environmental monitoringcapabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3,telnet, SSH, FTP, DHCP and NTP.

    Package Includes:
    • ATS / Switched PDU with two L5-30P inputs
    • Installable 2U mounting brackets
    • Operating manual

  • PDUMH30ATNET: Eaton Corporation: OEM Acquisition
Product Overview

Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Highly reliable solid-state switching between primary and secondary inputs occurs in 1-5 milliseconds. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability. Built-in LX Platform network management interface card. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring andemail notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. OptionalEnviroSense2 modules (sold separately) provide a variety of environmental monitoringcapabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3,telnet, SSH, FTP, DHCP and NTP.

    Package Includes:
    • ATS / Switched PDU with two L5-30P inputs
    • Installable 2U mounting brackets
    • Operating manual

Features
  • 2U rackmount, 2 L5-30P inputs, 25 switched outlets (24 5-15/20R, 1 L5-30R)
  • Built-in LX Platform Network Interface
  • Digital meter reports voltage, kW load level and output amperage in 4 load segments
  • Enables redundant A/B power option for non-redundant network devices
  • Individually switched outlets and built-in network interface enables remote control and monitoring
  • Single phase 30A 120V Auto Transfer Switch / ATS PDU; Highly reliable Solid State Switching
  • TAA Compliant
Technical Specs
P/N: PDUMH30ATNET Key Specs
Item
PDU SWITCHED ATS 120V 30A 24 5-15/20R; 1 L5-30R 2 L5-30P 2URM
OEM
Tripp Lite
OEM #
PDUMH30ATNET
Condition
New OEM Original
Returnable
No
Warranty
Other (See Notes)
Dimensions (WxDxH)
17.5 in x 12.5 in x 3.5 in
Input Connectors
2 x power NEMA L5-30
Input Voltage
AC 100/120/127 V
Networking
Ethernet
Output Voltage
AC 120 V
Output connectors
24 x power NEMA 5-15/20 - 1 x power NEMA L5-30
Power Capacity
2.9 kW
Rack Size
2U
Remote Management Protocol
SNMP, HTTP
Weight
13.89 lbs
Equivalents

Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Highly reliable solid-state switching between primary and secondary inputs occurs in 1-5 milliseconds. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability. Built-in LX Platform network management interface card. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring andemail notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. OptionalEnviroSense2 modules (sold separately) provide a variety of environmental monitoringcapabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3,telnet, SSH, FTP, DHCP and NTP.

    Package Includes:
    • ATS / Switched PDU with two L5-30P inputs
    • Installable 2U mounting brackets
    • Operating manual

  • PDUMH30ATNET: Eaton Corporation: OEM Acquisition
Product Overview

Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Highly reliable solid-state switching between primary and secondary inputs occurs in 1-5 milliseconds. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability. Built-in LX Platform network management interface card. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring andemail notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. OptionalEnviroSense2 modules (sold separately) provide a variety of environmental monitoringcapabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3,telnet, SSH, FTP, DHCP and NTP.

    Package Includes:
    • ATS / Switched PDU with two L5-30P inputs
    • Installable 2U mounting brackets
    • Operating manual

Features
  • 2U rackmount, 2 L5-30P inputs, 25 switched outlets (24 5-15/20R, 1 L5-30R)
  • Built-in LX Platform Network Interface
  • Digital meter reports voltage, kW load level and output amperage in 4 load segments
  • Enables redundant A/B power option for non-redundant network devices
  • Individually switched outlets and built-in network interface enables remote control and monitoring
  • Single phase 30A 120V Auto Transfer Switch / ATS PDU; Highly reliable Solid State Switching
  • TAA Compliant
Technical Specs
P/N: PDUMH30ATNET Key Specs
Item
PDU SWITCHED ATS 120V 30A 24 5-15/20R; 1 L5-30R 2 L5-30P 2URM
OEM
Tripp Lite
OEM #
PDUMH30ATNET
Condition
New OEM Original
Returnable
No
Warranty
Other (See Notes)
Dimensions (WxDxH)
17.5 in x 12.5 in x 3.5 in
Input Connectors
2 x power NEMA L5-30
Input Voltage
AC 100/120/127 V
Networking
Ethernet
Output Voltage
AC 120 V
Output connectors
24 x power NEMA 5-15/20 - 1 x power NEMA L5-30
Power Capacity
2.9 kW
Rack Size
2U
Remote Management Protocol
SNMP, HTTP
Weight
13.89 lbs
Equivalents

Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Highly reliable solid-state switching between primary and secondary inputs occurs in 1-5 milliseconds. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability. Built-in LX Platform network management interface card. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring andemail notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. OptionalEnviroSense2 modules (sold separately) provide a variety of environmental monitoringcapabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3,telnet, SSH, FTP, DHCP and NTP.

    Package Includes:
    • ATS / Switched PDU with two L5-30P inputs
    • Installable 2U mounting brackets
    • Operating manual

  • PDUMH30ATNET: Eaton Corporation: OEM Acquisition