Repair

DHC 4-2 CLASSIC SINGLE SINK POINT-OF-USE ELECTRIC TANKLESS WATER HEATER

DHC 4-2 CLASSIC SINGLE SINK POINT-OF-USE ELECTRIC TANKLESS WATER HEATER
DHC 4-2 CLASSIC SINGLE SINK POINT-OF-USE ELECTRIC TANKLESS WATER HEATER

DHC 4-2 CLASSIC SINGLE SINK POINT-OF-USE ELECTRIC TANKLESS WATER HEATER

Product Overview

Stiebel Eltron DHC 4-2 Classic tankless water heaters are designed for installation at the point of use. 240V/208V - 3.8 kW copper tankless electric.

The DHC Classic heats water instantaneously as it flows through the unit. Stand-by heat losses are completely eliminated.

The heating element is controlled by a flow switch which means a DHC Classic can never dry-fire and fail prematurely. The efficient heating elements are controlled by a simple flow switch. All DHC Classics are hydraulically controlled, allowing quiet operation. DHC Classic water heaters are equipped with a safety high limit with a manual reset. The rugged all copper design ensures many years of reliable service.

DHC 4-2 is shipped with 0.5 GPM pressure compensating flow reducer/aerators that fit on most faucets. Flow controls and faucet aerators are highly recommended in conjunction with tankless water heaters. No pressure relief valve drains, or circulating pumps are needed.

Technical Specs
P/N: DHC 4-2 Key Specs
Item
DHC 4-2 CLASSIC SINGLE SINK POINT-OF-USE ELECTRIC TANKLESS WATER HEATER
OEM
Stiebel Eltron
OEM #
DHC 4-2
Returnable
No
Warranty
Amperage
16 A/14 A
Amps - Water Heaters
16
Commercial / Residential
Commercial
Item - Water Heaters
Electric Tankless Water Heater
Min Flow Activation
0.42 gpm
Min. Recommended Wire Size
12/2 AWG
Min. recommended circuit breaker size
20 A/15 A
Minimum water flow to activate unit
0.43 gpm (1.6 l/min)
Phase - Water Heaters
1
Product Type
Electric Tankless Water Heater
Temperature Range - Water Heaters
82 Degrees to 130 Degrees F
Temperature Rise @ 0.5 GPM
0.7692 Degrees F
Temperature Rise @ 1.5 GPM
0.7647 Degrees F
Temperature Rise @ 2.5 GPM - Water Heaters
0.8 Degrees F
Voltage
240 V/208 V
Voltage - Water Heaters
208/240
Water Connection
1/2 in NPT
Water Heater Application
Undersink
Water Heater Design
Point-of-Use
Wattage
3.8 kW/2.9 kW
Watts - Water Heaters
2900/3800

Stiebel Eltron DHC 4-2 Classic tankless water heaters are designed for installation at the point of use. 240V/208V - 3.8 kW copper tankless electric.

The DHC Classic heats water instantaneously as it flows through the unit. Stand-by heat losses are completely eliminated.

The heating element is controlled by a flow switch which means a DHC Classic can never dry-fire and fail prematurely. The efficient heating elements are controlled by a simple flow switch. All DHC Classics are hydraulically controlled, allowing quiet operation. DHC Classic water heaters are equipped with a safety high limit with a manual reset. The rugged all copper design ensures many years of reliable service.

DHC 4-2 is shipped with 0.5 GPM pressure compensating flow reducer/aerators that fit on most faucets. Flow controls and faucet aerators are highly recommended in conjunction with tankless water heaters. No pressure relief valve drains, or circulating pumps are needed.

    Product Overview

    Stiebel Eltron DHC 4-2 Classic tankless water heaters are designed for installation at the point of use. 240V/208V - 3.8 kW copper tankless electric.

    The DHC Classic heats water instantaneously as it flows through the unit. Stand-by heat losses are completely eliminated.

    The heating element is controlled by a flow switch which means a DHC Classic can never dry-fire and fail prematurely. The efficient heating elements are controlled by a simple flow switch. All DHC Classics are hydraulically controlled, allowing quiet operation. DHC Classic water heaters are equipped with a safety high limit with a manual reset. The rugged all copper design ensures many years of reliable service.

    DHC 4-2 is shipped with 0.5 GPM pressure compensating flow reducer/aerators that fit on most faucets. Flow controls and faucet aerators are highly recommended in conjunction with tankless water heaters. No pressure relief valve drains, or circulating pumps are needed.

    Technical Specs
    P/N: DHC 4-2 Key Specs
    Item
    DHC 4-2 CLASSIC SINGLE SINK POINT-OF-USE ELECTRIC TANKLESS WATER HEATER
    OEM
    Stiebel Eltron
    OEM #
    DHC 4-2
    Returnable
    No
    Warranty
    Amperage
    16 A/14 A
    Amps - Water Heaters
    16
    Commercial / Residential
    Commercial
    Item - Water Heaters
    Electric Tankless Water Heater
    Min Flow Activation
    0.42 gpm
    Min. Recommended Wire Size
    12/2 AWG
    Min. recommended circuit breaker size
    20 A/15 A
    Minimum water flow to activate unit
    0.43 gpm (1.6 l/min)
    Phase - Water Heaters
    1
    Product Type
    Electric Tankless Water Heater
    Temperature Range - Water Heaters
    82 Degrees to 130 Degrees F
    Temperature Rise @ 0.5 GPM
    0.7692 Degrees F
    Temperature Rise @ 1.5 GPM
    0.7647 Degrees F
    Temperature Rise @ 2.5 GPM - Water Heaters
    0.8 Degrees F
    Voltage
    240 V/208 V
    Voltage - Water Heaters
    208/240
    Water Connection
    1/2 in NPT
    Water Heater Application
    Undersink
    Water Heater Design
    Point-of-Use
    Wattage
    3.8 kW/2.9 kW
    Watts - Water Heaters
    2900/3800

    Stiebel Eltron DHC 4-2 Classic tankless water heaters are designed for installation at the point of use. 240V/208V - 3.8 kW copper tankless electric.

    The DHC Classic heats water instantaneously as it flows through the unit. Stand-by heat losses are completely eliminated.

    The heating element is controlled by a flow switch which means a DHC Classic can never dry-fire and fail prematurely. The efficient heating elements are controlled by a simple flow switch. All DHC Classics are hydraulically controlled, allowing quiet operation. DHC Classic water heaters are equipped with a safety high limit with a manual reset. The rugged all copper design ensures many years of reliable service.

    DHC 4-2 is shipped with 0.5 GPM pressure compensating flow reducer/aerators that fit on most faucets. Flow controls and faucet aerators are highly recommended in conjunction with tankless water heaters. No pressure relief valve drains, or circulating pumps are needed.

      Product Overview

      Stiebel Eltron DHC 4-2 Classic tankless water heaters are designed for installation at the point of use. 240V/208V - 3.8 kW copper tankless electric.

      The DHC Classic heats water instantaneously as it flows through the unit. Stand-by heat losses are completely eliminated.

      The heating element is controlled by a flow switch which means a DHC Classic can never dry-fire and fail prematurely. The efficient heating elements are controlled by a simple flow switch. All DHC Classics are hydraulically controlled, allowing quiet operation. DHC Classic water heaters are equipped with a safety high limit with a manual reset. The rugged all copper design ensures many years of reliable service.

      DHC 4-2 is shipped with 0.5 GPM pressure compensating flow reducer/aerators that fit on most faucets. Flow controls and faucet aerators are highly recommended in conjunction with tankless water heaters. No pressure relief valve drains, or circulating pumps are needed.

      Technical Specs
      P/N: DHC 4-2 Key Specs
      Item
      DHC 4-2 CLASSIC SINGLE SINK POINT-OF-USE ELECTRIC TANKLESS WATER HEATER
      OEM
      Stiebel Eltron
      OEM #
      DHC 4-2
      Returnable
      No
      Warranty
      Amperage
      16 A/14 A
      Amps - Water Heaters
      16
      Commercial / Residential
      Commercial
      Item - Water Heaters
      Electric Tankless Water Heater
      Min Flow Activation
      0.42 gpm
      Min. Recommended Wire Size
      12/2 AWG
      Min. recommended circuit breaker size
      20 A/15 A
      Minimum water flow to activate unit
      0.43 gpm (1.6 l/min)
      Phase - Water Heaters
      1
      Product Type
      Electric Tankless Water Heater
      Temperature Range - Water Heaters
      82 Degrees to 130 Degrees F
      Temperature Rise @ 0.5 GPM
      0.7692 Degrees F
      Temperature Rise @ 1.5 GPM
      0.7647 Degrees F
      Temperature Rise @ 2.5 GPM - Water Heaters
      0.8 Degrees F
      Voltage
      240 V/208 V
      Voltage - Water Heaters
      208/240
      Water Connection
      1/2 in NPT
      Water Heater Application
      Undersink
      Water Heater Design
      Point-of-Use
      Wattage
      3.8 kW/2.9 kW
      Watts - Water Heaters
      2900/3800

      Stiebel Eltron DHC 4-2 Classic tankless water heaters are designed for installation at the point of use. 240V/208V - 3.8 kW copper tankless electric.

      The DHC Classic heats water instantaneously as it flows through the unit. Stand-by heat losses are completely eliminated.

      The heating element is controlled by a flow switch which means a DHC Classic can never dry-fire and fail prematurely. The efficient heating elements are controlled by a simple flow switch. All DHC Classics are hydraulically controlled, allowing quiet operation. DHC Classic water heaters are equipped with a safety high limit with a manual reset. The rugged all copper design ensures many years of reliable service.

      DHC 4-2 is shipped with 0.5 GPM pressure compensating flow reducer/aerators that fit on most faucets. Flow controls and faucet aerators are highly recommended in conjunction with tankless water heaters. No pressure relief valve drains, or circulating pumps are needed.