OEM#: FSP300-60PLNNew OEM Original Outright

300W ATX12V SWITCHING POWER SUPPLY by Sparkle Power Inc.

Your price:
$260.69 eachEstimated to ship by 10/28 if ordered before 3:30 PM EST
BUYING OPTIONS:
New OEM Original
Outright Purchase
$260.69 each
Warranty: 90 Day
Refurbished
Outright Purchase
$325.58 each
Warranty: 6 Month
SBA
300W ATX12V SWITCHING POWER SUPPLY by Sparkle Power Inc.
300W ATX12V SWITCHING POWER SUPPLY by Sparkle Power Inc.

OEM#: FSP300-60PLN
300W ATX12V SWITCHING POWER SUPPLY by Sparkle Power Inc.

New OEM Original Outright
Your price:
$260.69 each
Estimated to ship by 10/28 if ordered before 3:30 PM EST
Asset Information
Product Overview

  • Complied with ATX and ATX12V standard
  • Active Power Factor Correction (PFC) meet EN61000-3-2
  • High efficiency and reliability
  • Compatible with European Union Directive 2002/95/EC
  • (Restriction on Hazardous Substances)
  • Remote ON/OFF function
  • Internal 12V DC fan included
  • Noise Killer (thermal fan speed control function)
  • Low noise and ripple
  • Output over voltage, short circuit, and over current protection
  • 100% Hi-pot, ATE, and burn-in tested
  • Re-settable power shut down
  • Complies with FCC part 15 subpart J class B, and CISPR 22
  • class B
  • Approved by CUL/UL60950-1,TUV EN60950-1, NEMKO
  • EN60950-1 (CB Report), CE ,CCC,FCC,EMC
  • Dielectric Withstand: Primary frame ground 1800V AC for
  • 1sec
  • 65% Efficiency minimum measured at nominal AC main
  • voltage and frequency with maximum load on all outputs
  • Less than 20ms rise time
  • 17ms minimum at nominal input voltage hold-up Time
  • Power on delay time 100 - 500ms, off
  • delay 1ms minimum (TTL and CMOS compatible) Power Good Signal
  • Leakage Current not exceed 0.75mA at 115Vac/60Hz
  • MTBF 100,000 hours on maximum load at +25°C

Technical Specs
P/N: FSP300-60PLN Key Specs
Item
300W ATX12V SWITCHING POWER SUPPLY
OEM
Sparkle Power Inc.
OEM #
FSP300-60PLN
Condition
New OEM Original
Returnable
No
Warranty
90 Day
Frequency
47 - 63 HZ
Humidity
95% on Operating and Storage
Input Amps
Max. 6A (RMS) at 115 VAC, 3A (RMS) at 230 VAC
Input Range
90-264 VAC (RMS), Full Range Input
Inrush Amps
Max 60A at 115VAC, 90A at 230VAC at Cold Start
Length
5.5 IN
Operating Temperature
0°C - +50°C
Storage Temperature
-20°C - +80°C
Watts
300 W

  • Complied with ATX and ATX12V standard
  • Active Power Factor Correction (PFC) meet EN61000-3-2
  • High efficiency and reliability
  • Compatible with European Union Directive 2002/95/EC
  • (Restriction on Hazardous Substances)
  • Remote ON/OFF function
  • Internal 12V DC fan included
  • Noise Killer (thermal fan speed control function)
  • Low noise and ripple
  • Output over voltage, short circuit, and over current protection
  • 100% Hi-pot, ATE, and burn-in tested
  • Re-settable power shut down
  • Complies with FCC part 15 subpart J class B, and CISPR 22
  • class B
  • Approved by CUL/UL60950-1,TUV EN60950-1, NEMKO
  • EN60950-1 (CB Report), CE ,CCC,FCC,EMC
  • Dielectric Withstand: Primary frame ground 1800V AC for
  • 1sec
  • 65% Efficiency minimum measured at nominal AC main
  • voltage and frequency with maximum load on all outputs
  • Less than 20ms rise time
  • 17ms minimum at nominal input voltage hold-up Time
  • Power on delay time 100 - 500ms, off
  • delay 1ms minimum (TTL and CMOS compatible) Power Good Signal
  • Leakage Current not exceed 0.75mA at 115Vac/60Hz
  • MTBF 100,000 hours on maximum load at +25°C

    Product Overview

    • Complied with ATX and ATX12V standard
    • Active Power Factor Correction (PFC) meet EN61000-3-2
    • High efficiency and reliability
    • Compatible with European Union Directive 2002/95/EC
    • (Restriction on Hazardous Substances)
    • Remote ON/OFF function
    • Internal 12V DC fan included
    • Noise Killer (thermal fan speed control function)
    • Low noise and ripple
    • Output over voltage, short circuit, and over current protection
    • 100% Hi-pot, ATE, and burn-in tested
    • Re-settable power shut down
    • Complies with FCC part 15 subpart J class B, and CISPR 22
    • class B
    • Approved by CUL/UL60950-1,TUV EN60950-1, NEMKO
    • EN60950-1 (CB Report), CE ,CCC,FCC,EMC
    • Dielectric Withstand: Primary frame ground 1800V AC for
    • 1sec
    • 65% Efficiency minimum measured at nominal AC main
    • voltage and frequency with maximum load on all outputs
    • Less than 20ms rise time
    • 17ms minimum at nominal input voltage hold-up Time
    • Power on delay time 100 - 500ms, off
    • delay 1ms minimum (TTL and CMOS compatible) Power Good Signal
    • Leakage Current not exceed 0.75mA at 115Vac/60Hz
    • MTBF 100,000 hours on maximum load at +25°C

    Technical Specs
    P/N: FSP300-60PLN Key Specs
    Item
    300W ATX12V SWITCHING POWER SUPPLY
    OEM
    Sparkle Power Inc.
    OEM #
    FSP300-60PLN
    Condition
    New OEM Original
    Returnable
    No
    Warranty
    90 Day
    Frequency
    47 - 63 HZ
    Humidity
    95% on Operating and Storage
    Input Amps
    Max. 6A (RMS) at 115 VAC, 3A (RMS) at 230 VAC
    Input Range
    90-264 VAC (RMS), Full Range Input
    Inrush Amps
    Max 60A at 115VAC, 90A at 230VAC at Cold Start
    Length
    5.5 IN
    Operating Temperature
    0°C - +50°C
    Storage Temperature
    -20°C - +80°C
    Watts
    300 W

    • Complied with ATX and ATX12V standard
    • Active Power Factor Correction (PFC) meet EN61000-3-2
    • High efficiency and reliability
    • Compatible with European Union Directive 2002/95/EC
    • (Restriction on Hazardous Substances)
    • Remote ON/OFF function
    • Internal 12V DC fan included
    • Noise Killer (thermal fan speed control function)
    • Low noise and ripple
    • Output over voltage, short circuit, and over current protection
    • 100% Hi-pot, ATE, and burn-in tested
    • Re-settable power shut down
    • Complies with FCC part 15 subpart J class B, and CISPR 22
    • class B
    • Approved by CUL/UL60950-1,TUV EN60950-1, NEMKO
    • EN60950-1 (CB Report), CE ,CCC,FCC,EMC
    • Dielectric Withstand: Primary frame ground 1800V AC for
    • 1sec
    • 65% Efficiency minimum measured at nominal AC main
    • voltage and frequency with maximum load on all outputs
    • Less than 20ms rise time
    • 17ms minimum at nominal input voltage hold-up Time
    • Power on delay time 100 - 500ms, off
    • delay 1ms minimum (TTL and CMOS compatible) Power Good Signal
    • Leakage Current not exceed 0.75mA at 115Vac/60Hz
    • MTBF 100,000 hours on maximum load at +25°C

      Product Overview

      • Complied with ATX and ATX12V standard
      • Active Power Factor Correction (PFC) meet EN61000-3-2
      • High efficiency and reliability
      • Compatible with European Union Directive 2002/95/EC
      • (Restriction on Hazardous Substances)
      • Remote ON/OFF function
      • Internal 12V DC fan included
      • Noise Killer (thermal fan speed control function)
      • Low noise and ripple
      • Output over voltage, short circuit, and over current protection
      • 100% Hi-pot, ATE, and burn-in tested
      • Re-settable power shut down
      • Complies with FCC part 15 subpart J class B, and CISPR 22
      • class B
      • Approved by CUL/UL60950-1,TUV EN60950-1, NEMKO
      • EN60950-1 (CB Report), CE ,CCC,FCC,EMC
      • Dielectric Withstand: Primary frame ground 1800V AC for
      • 1sec
      • 65% Efficiency minimum measured at nominal AC main
      • voltage and frequency with maximum load on all outputs
      • Less than 20ms rise time
      • 17ms minimum at nominal input voltage hold-up Time
      • Power on delay time 100 - 500ms, off
      • delay 1ms minimum (TTL and CMOS compatible) Power Good Signal
      • Leakage Current not exceed 0.75mA at 115Vac/60Hz
      • MTBF 100,000 hours on maximum load at +25°C

      Technical Specs
      P/N: FSP300-60PLN Key Specs
      Item
      300W ATX12V SWITCHING POWER SUPPLY
      OEM
      Sparkle Power Inc.
      OEM #
      FSP300-60PLN
      Condition
      New OEM Original
      Returnable
      No
      Warranty
      90 Day
      Frequency
      47 - 63 HZ
      Humidity
      95% on Operating and Storage
      Input Amps
      Max. 6A (RMS) at 115 VAC, 3A (RMS) at 230 VAC
      Input Range
      90-264 VAC (RMS), Full Range Input
      Inrush Amps
      Max 60A at 115VAC, 90A at 230VAC at Cold Start
      Length
      5.5 IN
      Operating Temperature
      0°C - +50°C
      Storage Temperature
      -20°C - +80°C
      Watts
      300 W

      • Complied with ATX and ATX12V standard
      • Active Power Factor Correction (PFC) meet EN61000-3-2
      • High efficiency and reliability
      • Compatible with European Union Directive 2002/95/EC
      • (Restriction on Hazardous Substances)
      • Remote ON/OFF function
      • Internal 12V DC fan included
      • Noise Killer (thermal fan speed control function)
      • Low noise and ripple
      • Output over voltage, short circuit, and over current protection
      • 100% Hi-pot, ATE, and burn-in tested
      • Re-settable power shut down
      • Complies with FCC part 15 subpart J class B, and CISPR 22
      • class B
      • Approved by CUL/UL60950-1,TUV EN60950-1, NEMKO
      • EN60950-1 (CB Report), CE ,CCC,FCC,EMC
      • Dielectric Withstand: Primary frame ground 1800V AC for
      • 1sec
      • 65% Efficiency minimum measured at nominal AC main
      • voltage and frequency with maximum load on all outputs
      • Less than 20ms rise time
      • 17ms minimum at nominal input voltage hold-up Time
      • Power on delay time 100 - 500ms, off
      • delay 1ms minimum (TTL and CMOS compatible) Power Good Signal
      • Leakage Current not exceed 0.75mA at 115Vac/60Hz
      • MTBF 100,000 hours on maximum load at +25°C