OEM#: 155635-43New OEM Original Outright

EPM-20 CARBON BLOCK 10 MICRON FILTER by Pentek

Your price:
$40.19 eachEstimated to ship by 12/23 if ordered before 5:30 PM EST
HomePentek15563543
EPM-20 CARBON BLOCK 10 MICRON FILTER by Pentek
EPM-20 CARBON BLOCK 10 MICRON FILTER by Pentek
EPM-20 CARBON BLOCK 10 MICRON FILTER by Pentek

OEM#: 155635-43
EPM-20 CARBON BLOCK 10 MICRON FILTER by Pentek

New OEM Original Outright
Your price:
$40.19 each
Ready to shipReady to Ship
Estimated to ship by 12/23 if ordered before 5:30 PM EST
Asset Information
ADD TO LIST
Product Overview

Pentek EPM Series cartridges have a high porosity design that helps prevent the cartridge from plugging before its adsorption capability is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop. These cartridges are protected by Endurawrap, a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.

Features
  • Highest carbon block dirt holding capacity for maximum cartridge life
  • Bad taste & odor and chlorine taste & odor reduction
  • Lowest pressure drop
  • Economically priced
  • Made entirely from FDA-compliant materials
  • For a wide range of residential, food service, commercial and industrial applications
Technical Specs
P/N: 155635-43 Key Specs
Item
EPM-20 CARBON BLOCK 10 MICRON FILTER
OEM
Pentek
OEM #
155635-43
Condition
New OEM Original
Returnable
Yes
Warranty
As Is
Cap Material
Polypropylene
Capacity
6,000 GAL
Cartridge Style
Drop-in
Certification
NSF/ANSI 42
Change Frequency
6-12 Months
Contaminants
Sediment/Dirt/Rust
Cto Reduction Capacity
6000 Gallons
Diameter
2.7/8 IN
Efficiency
0.85
End Cap Type
Double Open Ended (DOE)
Filter Type
Carbon Block
Flow Rate
2 GPM
Gaskets
Buna-N
Initial Pressure Drop
1 PSI Differential
Inner/Outer Wraps
Polyolefin
Max Temp (°F)
180 °F
Media Type
Bonded Powdered Activated
Micron Rating
10 µm
Min Temp (°F)
40 °F
Netting
Polyethylene
Reduced
Chlorine/Taste/Odor

Pentek EPM Series cartridges have a high porosity design that helps prevent the cartridge from plugging before its adsorption capability is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop. These cartridges are protected by Endurawrap, a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.

    Product Overview

    Pentek EPM Series cartridges have a high porosity design that helps prevent the cartridge from plugging before its adsorption capability is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop. These cartridges are protected by Endurawrap, a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.

    Features
    • Highest carbon block dirt holding capacity for maximum cartridge life
    • Bad taste & odor and chlorine taste & odor reduction
    • Lowest pressure drop
    • Economically priced
    • Made entirely from FDA-compliant materials
    • For a wide range of residential, food service, commercial and industrial applications
    Technical Specs
    P/N: 155635-43 Key Specs
    Item
    EPM-20 CARBON BLOCK 10 MICRON FILTER
    OEM
    Pentek
    OEM #
    155635-43
    Condition
    New OEM Original
    Returnable
    Yes
    Warranty
    As Is
    Cap Material
    Polypropylene
    Capacity
    6,000 GAL
    Cartridge Style
    Drop-in
    Certification
    NSF/ANSI 42
    Change Frequency
    6-12 Months
    Contaminants
    Sediment/Dirt/Rust
    Cto Reduction Capacity
    6000 Gallons
    Diameter
    2.7/8 IN
    Efficiency
    0.85
    End Cap Type
    Double Open Ended (DOE)
    Filter Type
    Carbon Block
    Flow Rate
    2 GPM
    Gaskets
    Buna-N
    Initial Pressure Drop
    1 PSI Differential
    Inner/Outer Wraps
    Polyolefin
    Max Temp (°F)
    180 °F
    Media Type
    Bonded Powdered Activated
    Micron Rating
    10 µm
    Min Temp (°F)
    40 °F
    Netting
    Polyethylene
    Reduced
    Chlorine/Taste/Odor

    Pentek EPM Series cartridges have a high porosity design that helps prevent the cartridge from plugging before its adsorption capability is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop. These cartridges are protected by Endurawrap, a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.

      Product Overview

      Pentek EPM Series cartridges have a high porosity design that helps prevent the cartridge from plugging before its adsorption capability is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop. These cartridges are protected by Endurawrap, a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.

      Features
      • Highest carbon block dirt holding capacity for maximum cartridge life
      • Bad taste & odor and chlorine taste & odor reduction
      • Lowest pressure drop
      • Economically priced
      • Made entirely from FDA-compliant materials
      • For a wide range of residential, food service, commercial and industrial applications
      Technical Specs
      P/N: 155635-43 Key Specs
      Item
      EPM-20 CARBON BLOCK 10 MICRON FILTER
      OEM
      Pentek
      OEM #
      155635-43
      Condition
      New OEM Original
      Returnable
      Yes
      Warranty
      As Is
      Cap Material
      Polypropylene
      Capacity
      6,000 GAL
      Cartridge Style
      Drop-in
      Certification
      NSF/ANSI 42
      Change Frequency
      6-12 Months
      Contaminants
      Sediment/Dirt/Rust
      Cto Reduction Capacity
      6000 Gallons
      Diameter
      2.7/8 IN
      Efficiency
      0.85
      End Cap Type
      Double Open Ended (DOE)
      Filter Type
      Carbon Block
      Flow Rate
      2 GPM
      Gaskets
      Buna-N
      Initial Pressure Drop
      1 PSI Differential
      Inner/Outer Wraps
      Polyolefin
      Max Temp (°F)
      180 °F
      Media Type
      Bonded Powdered Activated
      Micron Rating
      10 µm
      Min Temp (°F)
      40 °F
      Netting
      Polyethylene
      Reduced
      Chlorine/Taste/Odor

      Pentek EPM Series cartridges have a high porosity design that helps prevent the cartridge from plugging before its adsorption capability is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop. These cartridges are protected by Endurawrap, a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.