OEM#: 6302-2RSNRNew OEM Original Outright

DEEP GROOVE BALL BEARING - DOUBLE SEALED SNAP RING 15MM BORE, 42MM OD by ORS Bearings

Your price:
$7.74 eachEstimated to ship by 10/30 if ordered before 10:30 AM EST
DEEP GROOVE BALL BEARING - DOUBLE SEALED SNAP RING 15MM BORE, 42MM OD by ORS Bearings
DEEP GROOVE BALL BEARING - DOUBLE SEALED SNAP RING 15MM BORE, 42MM OD by ORS Bearings

OEM#: 6302-2RSNR
DEEP GROOVE BALL BEARING - DOUBLE SEALED SNAP RING 15MM BORE, 42MM OD by ORS Bearings

New OEM Original Outright
Your price:
$7.74 each
Estimated to ship by 10/30 if ordered before 10:30 AM EST
Asset Information

Must purchase minimum of 6

Product Overview

ORS 6302-2RSNR Deep Groove Ball Bearing - Double Sealed Snap Ring 15mm Bore, 42mm OD

ORS Deep Groove Ball Bearings. Deep Grove Ball Bearings, often called Radial Ball Bearings, accommodate radial and axial loads, and are capable of operating at higher speeds. Due to these capabilities, they are the most widely used type of bearing. ORS Deep Groove Ball Bearings are made of AISI 52100 grade steel heat-stabilized to 300°F, in ABEC 1 tolerance (ISO Normal) and with C3 radial clearance. All of ORS bearings are 100% noise tested and produced to EMQ. Forgings and heat treatment are done in house. ORS is offering Double Sealed and Double Shielded bearings with Snap Ring for most sizes. ORS Bearings Inc. was established in 1982 with the license of Steyr Waelzlager of Austria, and headquartered in Ankara, Turkey with its 1,000,000 square foot production facility. The company has been granted numerous awards and certificates such as ISO 9001:2008, ISO/TS 16949:2009, ISO 14001, ISO/IEC 27001:2005, OHSAS 18001, FORD Q1 and many more. ORS bearings are commonly used in electric motors, appliances, fans, pumps, machine tool, agriculture, clutches, conveyors, food processing, textile and many other equipment and machinery.

Technical Specs
P/N: 6302-2RSNR Key Specs
Item
DEEP GROOVE BALL BEARING - DOUBLE SEALED SNAP RING 15MM BORE, 42MM OD
OEM
ORS Bearings
OEM #
6302-2RSNR
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Bearing Type
Double Sealded, Snap Ring
Bore Diameter Millimeters
15
Cage Material
Pressed steel
Country of Origin
Turkey
Dynamic Load (Kn)
11.33
Housing Corner Radius Max (Mm)
1
Housing Corner Radius Max, Snap Ring Side (Mm)
0.5
Internal Radial Clearance
C3
Max Mounted Snap Ring Od (Mm)
46.3
Max Speed / Grease (Rpm)
10300
Operating Temperature
- 20 / + 250°F
Outer Diameter Millimeters
42
Prepacked Grease
Polyrex EM
Shaft Fillet Corner Radius Max (Mm)
1
Static Load (Kn)
5.35
Tolerance
ISO Normal
Width Millimeters
13

ORS 6302-2RSNR Deep Groove Ball Bearing - Double Sealed Snap Ring 15mm Bore, 42mm OD

ORS Deep Groove Ball Bearings. Deep Grove Ball Bearings, often called Radial Ball Bearings, accommodate radial and axial loads, and are capable of operating at higher speeds. Due to these capabilities, they are the most widely used type of bearing. ORS Deep Groove Ball Bearings are made of AISI 52100 grade steel heat-stabilized to 300°F, in ABEC 1 tolerance (ISO Normal) and with C3 radial clearance. All of ORS bearings are 100% noise tested and produced to EMQ. Forgings and heat treatment are done in house. ORS is offering Double Sealed and Double Shielded bearings with Snap Ring for most sizes. ORS Bearings Inc. was established in 1982 with the license of Steyr Waelzlager of Austria, and headquartered in Ankara, Turkey with its 1,000,000 square foot production facility. The company has been granted numerous awards and certificates such as ISO 9001:2008, ISO/TS 16949:2009, ISO 14001, ISO/IEC 27001:2005, OHSAS 18001, FORD Q1 and many more. ORS bearings are commonly used in electric motors, appliances, fans, pumps, machine tool, agriculture, clutches, conveyors, food processing, textile and many other equipment and machinery.

    Product Overview

    ORS 6302-2RSNR Deep Groove Ball Bearing - Double Sealed Snap Ring 15mm Bore, 42mm OD

    ORS Deep Groove Ball Bearings. Deep Grove Ball Bearings, often called Radial Ball Bearings, accommodate radial and axial loads, and are capable of operating at higher speeds. Due to these capabilities, they are the most widely used type of bearing. ORS Deep Groove Ball Bearings are made of AISI 52100 grade steel heat-stabilized to 300°F, in ABEC 1 tolerance (ISO Normal) and with C3 radial clearance. All of ORS bearings are 100% noise tested and produced to EMQ. Forgings and heat treatment are done in house. ORS is offering Double Sealed and Double Shielded bearings with Snap Ring for most sizes. ORS Bearings Inc. was established in 1982 with the license of Steyr Waelzlager of Austria, and headquartered in Ankara, Turkey with its 1,000,000 square foot production facility. The company has been granted numerous awards and certificates such as ISO 9001:2008, ISO/TS 16949:2009, ISO 14001, ISO/IEC 27001:2005, OHSAS 18001, FORD Q1 and many more. ORS bearings are commonly used in electric motors, appliances, fans, pumps, machine tool, agriculture, clutches, conveyors, food processing, textile and many other equipment and machinery.

    Technical Specs
    P/N: 6302-2RSNR Key Specs
    Item
    DEEP GROOVE BALL BEARING - DOUBLE SEALED SNAP RING 15MM BORE, 42MM OD
    OEM
    ORS Bearings
    OEM #
    6302-2RSNR
    Condition
    New OEM Original
    Returnable
    No
    Warranty
    Mfr Warranty
    Bearing Type
    Double Sealded, Snap Ring
    Bore Diameter Millimeters
    15
    Cage Material
    Pressed steel
    Country of Origin
    Turkey
    Dynamic Load (Kn)
    11.33
    Housing Corner Radius Max (Mm)
    1
    Housing Corner Radius Max, Snap Ring Side (Mm)
    0.5
    Internal Radial Clearance
    C3
    Max Mounted Snap Ring Od (Mm)
    46.3
    Max Speed / Grease (Rpm)
    10300
    Operating Temperature
    - 20 / + 250°F
    Outer Diameter Millimeters
    42
    Prepacked Grease
    Polyrex EM
    Shaft Fillet Corner Radius Max (Mm)
    1
    Static Load (Kn)
    5.35
    Tolerance
    ISO Normal
    Width Millimeters
    13

    ORS 6302-2RSNR Deep Groove Ball Bearing - Double Sealed Snap Ring 15mm Bore, 42mm OD

    ORS Deep Groove Ball Bearings. Deep Grove Ball Bearings, often called Radial Ball Bearings, accommodate radial and axial loads, and are capable of operating at higher speeds. Due to these capabilities, they are the most widely used type of bearing. ORS Deep Groove Ball Bearings are made of AISI 52100 grade steel heat-stabilized to 300°F, in ABEC 1 tolerance (ISO Normal) and with C3 radial clearance. All of ORS bearings are 100% noise tested and produced to EMQ. Forgings and heat treatment are done in house. ORS is offering Double Sealed and Double Shielded bearings with Snap Ring for most sizes. ORS Bearings Inc. was established in 1982 with the license of Steyr Waelzlager of Austria, and headquartered in Ankara, Turkey with its 1,000,000 square foot production facility. The company has been granted numerous awards and certificates such as ISO 9001:2008, ISO/TS 16949:2009, ISO 14001, ISO/IEC 27001:2005, OHSAS 18001, FORD Q1 and many more. ORS bearings are commonly used in electric motors, appliances, fans, pumps, machine tool, agriculture, clutches, conveyors, food processing, textile and many other equipment and machinery.

      Product Overview

      ORS 6302-2RSNR Deep Groove Ball Bearing - Double Sealed Snap Ring 15mm Bore, 42mm OD

      ORS Deep Groove Ball Bearings. Deep Grove Ball Bearings, often called Radial Ball Bearings, accommodate radial and axial loads, and are capable of operating at higher speeds. Due to these capabilities, they are the most widely used type of bearing. ORS Deep Groove Ball Bearings are made of AISI 52100 grade steel heat-stabilized to 300°F, in ABEC 1 tolerance (ISO Normal) and with C3 radial clearance. All of ORS bearings are 100% noise tested and produced to EMQ. Forgings and heat treatment are done in house. ORS is offering Double Sealed and Double Shielded bearings with Snap Ring for most sizes. ORS Bearings Inc. was established in 1982 with the license of Steyr Waelzlager of Austria, and headquartered in Ankara, Turkey with its 1,000,000 square foot production facility. The company has been granted numerous awards and certificates such as ISO 9001:2008, ISO/TS 16949:2009, ISO 14001, ISO/IEC 27001:2005, OHSAS 18001, FORD Q1 and many more. ORS bearings are commonly used in electric motors, appliances, fans, pumps, machine tool, agriculture, clutches, conveyors, food processing, textile and many other equipment and machinery.

      Technical Specs
      P/N: 6302-2RSNR Key Specs
      Item
      DEEP GROOVE BALL BEARING - DOUBLE SEALED SNAP RING 15MM BORE, 42MM OD
      OEM
      ORS Bearings
      OEM #
      6302-2RSNR
      Condition
      New OEM Original
      Returnable
      No
      Warranty
      Mfr Warranty
      Bearing Type
      Double Sealded, Snap Ring
      Bore Diameter Millimeters
      15
      Cage Material
      Pressed steel
      Country of Origin
      Turkey
      Dynamic Load (Kn)
      11.33
      Housing Corner Radius Max (Mm)
      1
      Housing Corner Radius Max, Snap Ring Side (Mm)
      0.5
      Internal Radial Clearance
      C3
      Max Mounted Snap Ring Od (Mm)
      46.3
      Max Speed / Grease (Rpm)
      10300
      Operating Temperature
      - 20 / + 250°F
      Outer Diameter Millimeters
      42
      Prepacked Grease
      Polyrex EM
      Shaft Fillet Corner Radius Max (Mm)
      1
      Static Load (Kn)
      5.35
      Tolerance
      ISO Normal
      Width Millimeters
      13

      ORS 6302-2RSNR Deep Groove Ball Bearing - Double Sealed Snap Ring 15mm Bore, 42mm OD

      ORS Deep Groove Ball Bearings. Deep Grove Ball Bearings, often called Radial Ball Bearings, accommodate radial and axial loads, and are capable of operating at higher speeds. Due to these capabilities, they are the most widely used type of bearing. ORS Deep Groove Ball Bearings are made of AISI 52100 grade steel heat-stabilized to 300°F, in ABEC 1 tolerance (ISO Normal) and with C3 radial clearance. All of ORS bearings are 100% noise tested and produced to EMQ. Forgings and heat treatment are done in house. ORS is offering Double Sealed and Double Shielded bearings with Snap Ring for most sizes. ORS Bearings Inc. was established in 1982 with the license of Steyr Waelzlager of Austria, and headquartered in Ankara, Turkey with its 1,000,000 square foot production facility. The company has been granted numerous awards and certificates such as ISO 9001:2008, ISO/TS 16949:2009, ISO 14001, ISO/IEC 27001:2005, OHSAS 18001, FORD Q1 and many more. ORS bearings are commonly used in electric motors, appliances, fans, pumps, machine tool, agriculture, clutches, conveyors, food processing, textile and many other equipment and machinery.