OEM#: 32206New OEM Original Outright

TAPERED ROLLER BEARING - METRIC 30MM BORE, 62MM OD by ORS Bearings

Your price:
$15.34 eachEstimated to ship by 12/30 if ordered before 10:30 AM EST
HomeORS Bearings32206
TAPERED ROLLER BEARING - METRIC 30MM BORE, 62MM OD by ORS Bearings
TAPERED ROLLER BEARING - METRIC 30MM BORE, 62MM OD by ORS Bearings

OEM#: 32206
TAPERED ROLLER BEARING - METRIC 30MM BORE, 62MM OD by ORS Bearings

New OEM Original Outright
Your price:
$15.34 each
Estimated to ship by 12/30 if ordered before 10:30 AM EST
Asset Information

Must purchase minimum of 3

ADD TO LIST
Product Overview

ORS 32206 Tapered Roller Bearing - Metric 30mm Bore, 62mm OD

ORS Tapered Roller Bearings - Metric. ORS Tapered Roller Bearings are separable; Cone (inner ring) with roller and cage assembly and Cup (outer ring). These bearings can be assembled separately and supplied as matched Cup and Cone sets. Bearings are made of AISI 52100 grade steel and heat-stabilized to 300°F. Rollers and raceways are optimized to have a line contact which allows the bearing to carry heavy radial and axial loads. Since these bearings can only support axial loads in one direction, a second laterally reversed bearing may be used for the axial load in other direction (either "back-to-back" or "face-to-face" arrangement). Pressed steel cage separates rollers evenly for reduced wear properties and minimal heat generation. These bearings are mainly used in mining, agriculture, construction, automotive axle, gearbox, conveyor systems in heavy duty industries, among others. ORS Bearings Inc. was established in 1982 with the license of Steyr Waelzlager of Austria, and headquartered in Ankara, Turkey with its 1,000,000 square foot production facility. The company has been granted numerous awards and certificates such as ISO 9001:2008, ISO/TS 16949:2009, ISO 14001, ISO/IEC 27001:2005, OHSAS 18001, FORD Q1 and many more.

Technical Specs
P/N: 32206 Key Specs
Item
TAPERED ROLLER BEARING - METRIC 30MM BORE, 62MM OD
OEM
ORS Bearings
OEM #
32206
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Assembled Width (Mm)
21.25
Bearing Type
Tapered Roller
Bore Diameter Millimeters
30
Cage Material
Pressed steel
Cone Width (Mm)
20
Country of Origin
Turkey
Cup Width (Mm)
17
Dynamic Load (Kn)
52.11
Housing Corner Radius Max (Mm)
1
Max Speed / Grease (Rpm)
6300
Max Speed / Oil (Rpm)
8200
Operating Temperature
- 20 / + 300°F
Outer Diameter Millimeters
62
Shaft Fillet Corner Radius Max (Mm)
1
Static Load (Kn)
60.31
Tolerance
ISO Normal

ORS 32206 Tapered Roller Bearing - Metric 30mm Bore, 62mm OD

ORS Tapered Roller Bearings - Metric. ORS Tapered Roller Bearings are separable; Cone (inner ring) with roller and cage assembly and Cup (outer ring). These bearings can be assembled separately and supplied as matched Cup and Cone sets. Bearings are made of AISI 52100 grade steel and heat-stabilized to 300°F. Rollers and raceways are optimized to have a line contact which allows the bearing to carry heavy radial and axial loads. Since these bearings can only support axial loads in one direction, a second laterally reversed bearing may be used for the axial load in other direction (either "back-to-back" or "face-to-face" arrangement). Pressed steel cage separates rollers evenly for reduced wear properties and minimal heat generation. These bearings are mainly used in mining, agriculture, construction, automotive axle, gearbox, conveyor systems in heavy duty industries, among others. ORS Bearings Inc. was established in 1982 with the license of Steyr Waelzlager of Austria, and headquartered in Ankara, Turkey with its 1,000,000 square foot production facility. The company has been granted numerous awards and certificates such as ISO 9001:2008, ISO/TS 16949:2009, ISO 14001, ISO/IEC 27001:2005, OHSAS 18001, FORD Q1 and many more.

    Product Overview

    ORS 32206 Tapered Roller Bearing - Metric 30mm Bore, 62mm OD

    ORS Tapered Roller Bearings - Metric. ORS Tapered Roller Bearings are separable; Cone (inner ring) with roller and cage assembly and Cup (outer ring). These bearings can be assembled separately and supplied as matched Cup and Cone sets. Bearings are made of AISI 52100 grade steel and heat-stabilized to 300°F. Rollers and raceways are optimized to have a line contact which allows the bearing to carry heavy radial and axial loads. Since these bearings can only support axial loads in one direction, a second laterally reversed bearing may be used for the axial load in other direction (either "back-to-back" or "face-to-face" arrangement). Pressed steel cage separates rollers evenly for reduced wear properties and minimal heat generation. These bearings are mainly used in mining, agriculture, construction, automotive axle, gearbox, conveyor systems in heavy duty industries, among others. ORS Bearings Inc. was established in 1982 with the license of Steyr Waelzlager of Austria, and headquartered in Ankara, Turkey with its 1,000,000 square foot production facility. The company has been granted numerous awards and certificates such as ISO 9001:2008, ISO/TS 16949:2009, ISO 14001, ISO/IEC 27001:2005, OHSAS 18001, FORD Q1 and many more.

    Technical Specs
    P/N: 32206 Key Specs
    Item
    TAPERED ROLLER BEARING - METRIC 30MM BORE, 62MM OD
    OEM
    ORS Bearings
    OEM #
    32206
    Condition
    New OEM Original
    Returnable
    No
    Warranty
    Mfr Warranty
    Assembled Width (Mm)
    21.25
    Bearing Type
    Tapered Roller
    Bore Diameter Millimeters
    30
    Cage Material
    Pressed steel
    Cone Width (Mm)
    20
    Country of Origin
    Turkey
    Cup Width (Mm)
    17
    Dynamic Load (Kn)
    52.11
    Housing Corner Radius Max (Mm)
    1
    Max Speed / Grease (Rpm)
    6300
    Max Speed / Oil (Rpm)
    8200
    Operating Temperature
    - 20 / + 300°F
    Outer Diameter Millimeters
    62
    Shaft Fillet Corner Radius Max (Mm)
    1
    Static Load (Kn)
    60.31
    Tolerance
    ISO Normal

    ORS 32206 Tapered Roller Bearing - Metric 30mm Bore, 62mm OD

    ORS Tapered Roller Bearings - Metric. ORS Tapered Roller Bearings are separable; Cone (inner ring) with roller and cage assembly and Cup (outer ring). These bearings can be assembled separately and supplied as matched Cup and Cone sets. Bearings are made of AISI 52100 grade steel and heat-stabilized to 300°F. Rollers and raceways are optimized to have a line contact which allows the bearing to carry heavy radial and axial loads. Since these bearings can only support axial loads in one direction, a second laterally reversed bearing may be used for the axial load in other direction (either "back-to-back" or "face-to-face" arrangement). Pressed steel cage separates rollers evenly for reduced wear properties and minimal heat generation. These bearings are mainly used in mining, agriculture, construction, automotive axle, gearbox, conveyor systems in heavy duty industries, among others. ORS Bearings Inc. was established in 1982 with the license of Steyr Waelzlager of Austria, and headquartered in Ankara, Turkey with its 1,000,000 square foot production facility. The company has been granted numerous awards and certificates such as ISO 9001:2008, ISO/TS 16949:2009, ISO 14001, ISO/IEC 27001:2005, OHSAS 18001, FORD Q1 and many more.

      Product Overview

      ORS 32206 Tapered Roller Bearing - Metric 30mm Bore, 62mm OD

      ORS Tapered Roller Bearings - Metric. ORS Tapered Roller Bearings are separable; Cone (inner ring) with roller and cage assembly and Cup (outer ring). These bearings can be assembled separately and supplied as matched Cup and Cone sets. Bearings are made of AISI 52100 grade steel and heat-stabilized to 300°F. Rollers and raceways are optimized to have a line contact which allows the bearing to carry heavy radial and axial loads. Since these bearings can only support axial loads in one direction, a second laterally reversed bearing may be used for the axial load in other direction (either "back-to-back" or "face-to-face" arrangement). Pressed steel cage separates rollers evenly for reduced wear properties and minimal heat generation. These bearings are mainly used in mining, agriculture, construction, automotive axle, gearbox, conveyor systems in heavy duty industries, among others. ORS Bearings Inc. was established in 1982 with the license of Steyr Waelzlager of Austria, and headquartered in Ankara, Turkey with its 1,000,000 square foot production facility. The company has been granted numerous awards and certificates such as ISO 9001:2008, ISO/TS 16949:2009, ISO 14001, ISO/IEC 27001:2005, OHSAS 18001, FORD Q1 and many more.

      Technical Specs
      P/N: 32206 Key Specs
      Item
      TAPERED ROLLER BEARING - METRIC 30MM BORE, 62MM OD
      OEM
      ORS Bearings
      OEM #
      32206
      Condition
      New OEM Original
      Returnable
      No
      Warranty
      Mfr Warranty
      Assembled Width (Mm)
      21.25
      Bearing Type
      Tapered Roller
      Bore Diameter Millimeters
      30
      Cage Material
      Pressed steel
      Cone Width (Mm)
      20
      Country of Origin
      Turkey
      Cup Width (Mm)
      17
      Dynamic Load (Kn)
      52.11
      Housing Corner Radius Max (Mm)
      1
      Max Speed / Grease (Rpm)
      6300
      Max Speed / Oil (Rpm)
      8200
      Operating Temperature
      - 20 / + 300°F
      Outer Diameter Millimeters
      62
      Shaft Fillet Corner Radius Max (Mm)
      1
      Static Load (Kn)
      60.31
      Tolerance
      ISO Normal

      ORS 32206 Tapered Roller Bearing - Metric 30mm Bore, 62mm OD

      ORS Tapered Roller Bearings - Metric. ORS Tapered Roller Bearings are separable; Cone (inner ring) with roller and cage assembly and Cup (outer ring). These bearings can be assembled separately and supplied as matched Cup and Cone sets. Bearings are made of AISI 52100 grade steel and heat-stabilized to 300°F. Rollers and raceways are optimized to have a line contact which allows the bearing to carry heavy radial and axial loads. Since these bearings can only support axial loads in one direction, a second laterally reversed bearing may be used for the axial load in other direction (either "back-to-back" or "face-to-face" arrangement). Pressed steel cage separates rollers evenly for reduced wear properties and minimal heat generation. These bearings are mainly used in mining, agriculture, construction, automotive axle, gearbox, conveyor systems in heavy duty industries, among others. ORS Bearings Inc. was established in 1982 with the license of Steyr Waelzlager of Austria, and headquartered in Ankara, Turkey with its 1,000,000 square foot production facility. The company has been granted numerous awards and certificates such as ISO 9001:2008, ISO/TS 16949:2009, ISO 14001, ISO/IEC 27001:2005, OHSAS 18001, FORD Q1 and many more.