OEM#: 535-110New OEM Original Outright

LKG 610 10 LEAD ELECTRICAL SAFETY ANALYZER, 110 V by Netech Corp.

Your price:
$1,736.90 eachEstimated to ship by 12/31 if ordered before 12:30 PM EST
HomeNetech Corp.535110
LKG 610 10 LEAD ELECTRICAL SAFETY ANALYZER, 110 V by Netech Corp.
LKG 610 10 LEAD ELECTRICAL SAFETY ANALYZER, 110 V by Netech Corp.

OEM#: 535-110
LKG 610 10 LEAD ELECTRICAL SAFETY ANALYZER, 110 V by Netech Corp.

New OEM Original Outright
Your price:
$1,736.90 each
Estimated to ship by 12/31 if ordered before 12:30 PM EST
Asset Information
ADD TO LIST
Product Overview

LKG 610 Electrical Safety Analyzer is designed to test any piece of electrically operated patient care equipment. This full featured analyzer is microprocessor controlled and has a complete compliment of ten leads. LKG 610 measures line voltage, outlet polarity, device current, earth leakage current, chassis resistance, and case leakage current. In addition, it performs lead ISO tests and point-to-point measurements.

All tests are quickly and easily performed by selecting the appropriate test function key. Measurement results are displayed on the large LCD screen with measurement units clearly indicated by an LED. Large switches change the polarity, open and close neutral, and lift the ground. Ten universal lead connectors accept both snaps and any size posts. Calibrated test points are available to ensure performance accuracy and repeatability. Either AAMI or IEC 601-1 test loads may be selected. The receptacle is fused with an accessible 20A fuse and the tester itself is fused internally.

  • Fast, accurate, and portable
  • Easy to use
  • Large LCD display
  • Accessible line fuse
  • Calibrated test points
  • Selectable test loads
  • 15 and 20 amp capabilities
  • Point-to-point testing
  • Uses any test cable
  • 10 lead universal connector
  • Complies with both aami and iec 601-1 test loads
  • Power requirements: 110 VAC 50 - 60 Hz, 20 Amp or 220 VAC 10 Amp maximum rated for the test outlet and 0.1 Amps rated for the unit
  • LED unit of measure indicator
  • Controls: 12 Push Button Function Keys - Open/Closed, Neutral Switch Normal/Off/Reverse Polarity Switch, Momentary Ground Open Switch, 10 Universal Snap/Post ECG Connectors Test Load Selector Switch

Accuracy:

  • Resistance: +/- 2% +/- 1 LSD
  • Leakage: +/- 1% of FS DC to 1 KHz +/- 1 LSD, +/- 2% of FS 1 KHz to 100 KHz, +/- 4% of FS 100 kHz to 1 MHz
  • Instrument Current: +/- 2% +/- 1 LSD

Calibrated Test Points:

  • Reference Ground: 1 Ohm
  • Leakage: 200 microamp

Technical Specs
P/N: 535-110 Key Specs
Item
LKG 610 10 LEAD ELECTRICAL SAFETY ANALYZER, 110 V
OEM
Netech Corp.
OEM #
535-110
Condition
New OEM Original
Returnable
No
Warranty
12 Month
Amps
20 A or 220 VAC
Display
LCD
Frequency
50 - 60 HZ
Instrument Current
0 - 19.99 A
Leakage Amps
0 - 1999 MA
Operating Range
59 to 95°F (15 to 35°C)
Relative Humidity
90% (max) at Temperature
Resistance
0 - 1999 MOhms
Storage Temperature
0 to 122°F ( -18 to 50°C)
Volts
110 VAC
Certifications
Minority OwnedMinority OwnedSBASBA

LKG 610 Electrical Safety Analyzer is designed to test any piece of electrically operated patient care equipment. This full featured analyzer is microprocessor controlled and has a complete compliment of ten leads. LKG 610 measures line voltage, outlet polarity, device current, earth leakage current, chassis resistance, and case leakage current. In addition, it performs lead ISO tests and point-to-point measurements.

All tests are quickly and easily performed by selecting the appropriate test function key. Measurement results are displayed on the large LCD screen with measurement units clearly indicated by an LED. Large switches change the polarity, open and close neutral, and lift the ground. Ten universal lead connectors accept both snaps and any size posts. Calibrated test points are available to ensure performance accuracy and repeatability. Either AAMI or IEC 601-1 test loads may be selected. The receptacle is fused with an accessible 20A fuse and the tester itself is fused internally.

  • Fast, accurate, and portable
  • Easy to use
  • Large LCD display
  • Accessible line fuse
  • Calibrated test points
  • Selectable test loads
  • 15 and 20 amp capabilities
  • Point-to-point testing
  • Uses any test cable
  • 10 lead universal connector
  • Complies with both aami and iec 601-1 test loads
  • Power requirements: 110 VAC 50 - 60 Hz, 20 Amp or 220 VAC 10 Amp maximum rated for the test outlet and 0.1 Amps rated for the unit
  • LED unit of measure indicator
  • Controls: 12 Push Button Function Keys - Open/Closed, Neutral Switch Normal/Off/Reverse Polarity Switch, Momentary Ground Open Switch, 10 Universal Snap/Post ECG Connectors Test Load Selector Switch

Accuracy:

  • Resistance: +/- 2% +/- 1 LSD
  • Leakage: +/- 1% of FS DC to 1 KHz +/- 1 LSD, +/- 2% of FS 1 KHz to 100 KHz, +/- 4% of FS 100 kHz to 1 MHz
  • Instrument Current: +/- 2% +/- 1 LSD

Calibrated Test Points:

  • Reference Ground: 1 Ohm
  • Leakage: 200 microamp

    Product Overview

    LKG 610 Electrical Safety Analyzer is designed to test any piece of electrically operated patient care equipment. This full featured analyzer is microprocessor controlled and has a complete compliment of ten leads. LKG 610 measures line voltage, outlet polarity, device current, earth leakage current, chassis resistance, and case leakage current. In addition, it performs lead ISO tests and point-to-point measurements.

    All tests are quickly and easily performed by selecting the appropriate test function key. Measurement results are displayed on the large LCD screen with measurement units clearly indicated by an LED. Large switches change the polarity, open and close neutral, and lift the ground. Ten universal lead connectors accept both snaps and any size posts. Calibrated test points are available to ensure performance accuracy and repeatability. Either AAMI or IEC 601-1 test loads may be selected. The receptacle is fused with an accessible 20A fuse and the tester itself is fused internally.

    • Fast, accurate, and portable
    • Easy to use
    • Large LCD display
    • Accessible line fuse
    • Calibrated test points
    • Selectable test loads
    • 15 and 20 amp capabilities
    • Point-to-point testing
    • Uses any test cable
    • 10 lead universal connector
    • Complies with both aami and iec 601-1 test loads
    • Power requirements: 110 VAC 50 - 60 Hz, 20 Amp or 220 VAC 10 Amp maximum rated for the test outlet and 0.1 Amps rated for the unit
    • LED unit of measure indicator
    • Controls: 12 Push Button Function Keys - Open/Closed, Neutral Switch Normal/Off/Reverse Polarity Switch, Momentary Ground Open Switch, 10 Universal Snap/Post ECG Connectors Test Load Selector Switch

    Accuracy:

    • Resistance: +/- 2% +/- 1 LSD
    • Leakage: +/- 1% of FS DC to 1 KHz +/- 1 LSD, +/- 2% of FS 1 KHz to 100 KHz, +/- 4% of FS 100 kHz to 1 MHz
    • Instrument Current: +/- 2% +/- 1 LSD

    Calibrated Test Points:

    • Reference Ground: 1 Ohm
    • Leakage: 200 microamp

    Technical Specs
    P/N: 535-110 Key Specs
    Item
    LKG 610 10 LEAD ELECTRICAL SAFETY ANALYZER, 110 V
    OEM
    Netech Corp.
    OEM #
    535-110
    Condition
    New OEM Original
    Returnable
    No
    Warranty
    12 Month
    Amps
    20 A or 220 VAC
    Display
    LCD
    Frequency
    50 - 60 HZ
    Instrument Current
    0 - 19.99 A
    Leakage Amps
    0 - 1999 MA
    Operating Range
    59 to 95°F (15 to 35°C)
    Relative Humidity
    90% (max) at Temperature
    Resistance
    0 - 1999 MOhms
    Storage Temperature
    0 to 122°F ( -18 to 50°C)
    Volts
    110 VAC
    Certifications
    Minority OwnedMinority OwnedSBASBA

    LKG 610 Electrical Safety Analyzer is designed to test any piece of electrically operated patient care equipment. This full featured analyzer is microprocessor controlled and has a complete compliment of ten leads. LKG 610 measures line voltage, outlet polarity, device current, earth leakage current, chassis resistance, and case leakage current. In addition, it performs lead ISO tests and point-to-point measurements.

    All tests are quickly and easily performed by selecting the appropriate test function key. Measurement results are displayed on the large LCD screen with measurement units clearly indicated by an LED. Large switches change the polarity, open and close neutral, and lift the ground. Ten universal lead connectors accept both snaps and any size posts. Calibrated test points are available to ensure performance accuracy and repeatability. Either AAMI or IEC 601-1 test loads may be selected. The receptacle is fused with an accessible 20A fuse and the tester itself is fused internally.

    • Fast, accurate, and portable
    • Easy to use
    • Large LCD display
    • Accessible line fuse
    • Calibrated test points
    • Selectable test loads
    • 15 and 20 amp capabilities
    • Point-to-point testing
    • Uses any test cable
    • 10 lead universal connector
    • Complies with both aami and iec 601-1 test loads
    • Power requirements: 110 VAC 50 - 60 Hz, 20 Amp or 220 VAC 10 Amp maximum rated for the test outlet and 0.1 Amps rated for the unit
    • LED unit of measure indicator
    • Controls: 12 Push Button Function Keys - Open/Closed, Neutral Switch Normal/Off/Reverse Polarity Switch, Momentary Ground Open Switch, 10 Universal Snap/Post ECG Connectors Test Load Selector Switch

    Accuracy:

    • Resistance: +/- 2% +/- 1 LSD
    • Leakage: +/- 1% of FS DC to 1 KHz +/- 1 LSD, +/- 2% of FS 1 KHz to 100 KHz, +/- 4% of FS 100 kHz to 1 MHz
    • Instrument Current: +/- 2% +/- 1 LSD

    Calibrated Test Points:

    • Reference Ground: 1 Ohm
    • Leakage: 200 microamp

      Product Overview

      LKG 610 Electrical Safety Analyzer is designed to test any piece of electrically operated patient care equipment. This full featured analyzer is microprocessor controlled and has a complete compliment of ten leads. LKG 610 measures line voltage, outlet polarity, device current, earth leakage current, chassis resistance, and case leakage current. In addition, it performs lead ISO tests and point-to-point measurements.

      All tests are quickly and easily performed by selecting the appropriate test function key. Measurement results are displayed on the large LCD screen with measurement units clearly indicated by an LED. Large switches change the polarity, open and close neutral, and lift the ground. Ten universal lead connectors accept both snaps and any size posts. Calibrated test points are available to ensure performance accuracy and repeatability. Either AAMI or IEC 601-1 test loads may be selected. The receptacle is fused with an accessible 20A fuse and the tester itself is fused internally.

      • Fast, accurate, and portable
      • Easy to use
      • Large LCD display
      • Accessible line fuse
      • Calibrated test points
      • Selectable test loads
      • 15 and 20 amp capabilities
      • Point-to-point testing
      • Uses any test cable
      • 10 lead universal connector
      • Complies with both aami and iec 601-1 test loads
      • Power requirements: 110 VAC 50 - 60 Hz, 20 Amp or 220 VAC 10 Amp maximum rated for the test outlet and 0.1 Amps rated for the unit
      • LED unit of measure indicator
      • Controls: 12 Push Button Function Keys - Open/Closed, Neutral Switch Normal/Off/Reverse Polarity Switch, Momentary Ground Open Switch, 10 Universal Snap/Post ECG Connectors Test Load Selector Switch

      Accuracy:

      • Resistance: +/- 2% +/- 1 LSD
      • Leakage: +/- 1% of FS DC to 1 KHz +/- 1 LSD, +/- 2% of FS 1 KHz to 100 KHz, +/- 4% of FS 100 kHz to 1 MHz
      • Instrument Current: +/- 2% +/- 1 LSD

      Calibrated Test Points:

      • Reference Ground: 1 Ohm
      • Leakage: 200 microamp

      Technical Specs
      P/N: 535-110 Key Specs
      Item
      LKG 610 10 LEAD ELECTRICAL SAFETY ANALYZER, 110 V
      OEM
      Netech Corp.
      OEM #
      535-110
      Condition
      New OEM Original
      Returnable
      No
      Warranty
      12 Month
      Amps
      20 A or 220 VAC
      Display
      LCD
      Frequency
      50 - 60 HZ
      Instrument Current
      0 - 19.99 A
      Leakage Amps
      0 - 1999 MA
      Operating Range
      59 to 95°F (15 to 35°C)
      Relative Humidity
      90% (max) at Temperature
      Resistance
      0 - 1999 MOhms
      Storage Temperature
      0 to 122°F ( -18 to 50°C)
      Volts
      110 VAC
      Certifications
      Minority OwnedMinority OwnedSBASBA

      LKG 610 Electrical Safety Analyzer is designed to test any piece of electrically operated patient care equipment. This full featured analyzer is microprocessor controlled and has a complete compliment of ten leads. LKG 610 measures line voltage, outlet polarity, device current, earth leakage current, chassis resistance, and case leakage current. In addition, it performs lead ISO tests and point-to-point measurements.

      All tests are quickly and easily performed by selecting the appropriate test function key. Measurement results are displayed on the large LCD screen with measurement units clearly indicated by an LED. Large switches change the polarity, open and close neutral, and lift the ground. Ten universal lead connectors accept both snaps and any size posts. Calibrated test points are available to ensure performance accuracy and repeatability. Either AAMI or IEC 601-1 test loads may be selected. The receptacle is fused with an accessible 20A fuse and the tester itself is fused internally.

      • Fast, accurate, and portable
      • Easy to use
      • Large LCD display
      • Accessible line fuse
      • Calibrated test points
      • Selectable test loads
      • 15 and 20 amp capabilities
      • Point-to-point testing
      • Uses any test cable
      • 10 lead universal connector
      • Complies with both aami and iec 601-1 test loads
      • Power requirements: 110 VAC 50 - 60 Hz, 20 Amp or 220 VAC 10 Amp maximum rated for the test outlet and 0.1 Amps rated for the unit
      • LED unit of measure indicator
      • Controls: 12 Push Button Function Keys - Open/Closed, Neutral Switch Normal/Off/Reverse Polarity Switch, Momentary Ground Open Switch, 10 Universal Snap/Post ECG Connectors Test Load Selector Switch

      Accuracy:

      • Resistance: +/- 2% +/- 1 LSD
      • Leakage: +/- 1% of FS DC to 1 KHz +/- 1 LSD, +/- 2% of FS 1 KHz to 100 KHz, +/- 4% of FS 100 kHz to 1 MHz
      • Instrument Current: +/- 2% +/- 1 LSD

      Calibrated Test Points:

      • Reference Ground: 1 Ohm
      • Leakage: 200 microamp