Replaces Medivators (Cantel Medical) (now STERIS) MF010069New Aftermarket Outright

0.1 MICRON, 2.5" X 10", BACTERIAL RETENTION FILTER

Your price:
$269.19 each
$363.24 Savings: $94.05 (26%)
Estimated to ship by 11/21 if ordered before 5:30 PM EST
HomeMedivators (Cantel Medical) (now STERIS)mf010069
BUYING OPTIONS:
New Aftermarket
Outright Purchase
$269.19 each
Warranty: As Is
New OEM Original
Outright Purchase
$367.39 each
Warranty: 90 Day
0.1 MICRON, 2.5" X 10", BACTERIAL RETENTION FILTER
0.1 MICRON, 2.5" X 10", BACTERIAL RETENTION FILTER

Replaces Medivators (Cantel Medical) (now STERIS) MF010069
0.1 MICRON, 2.5" X 10", BACTERIAL RETENTION FILTER

New Aftermarket Outright
Your price:
$269.19 each
$363.24 Savings: $94.05 (26%)
Ready to shipReady to Ship
Estimated to ship by 11/21 if ordered before 5:30 PM EST
Asset Information
ADD TO LIST
Product Overview

Water filters should be replaced at a minimum every three months for the 1.0 micron and 0.4 micron filters and every six months for the 0.1 micron filter. If the water pressure drops below 40 PSI or the difference between the gauges is greater than 5 PSI the corresponding filter needs to be replaced. The following conditions must be met before changing a filter: 1. No endoscope reprocessing cycles are running; 2. No water line disinfection procedure is running.

  • This filter is located outside the ADVANTAGE PLUS Endoscope Reprocessor
  • When looking at the pre-filtration it is located on the far left
  • It needs to be changed every 6 months or sooner if poor water conditions exist
  • Always keep one on hand and a water line disinfectant process must be performed when changing this filter

Technical Specs
P/N: MF010069 Key Specs
Item
0.1 MICRON, 2.5" X 10", BACTERIAL RETENTION FILTER
OEM
Medivators (Cantel Medical) (now STERIS)
OEM #
MF010069
Condition
New Aftermarket
Returnable
Yes
Warranty
As Is
Micron Rating
0.1 um
Equivalents

Water filters should be replaced at a minimum every three months for the 1.0 micron and 0.4 micron filters and every six months for the 0.1 micron filter. If the water pressure drops below 40 PSI or the difference between the gauges is greater than 5 PSI the corresponding filter needs to be replaced. The following conditions must be met before changing a filter: 1. No endoscope reprocessing cycles are running; 2. No water line disinfection procedure is running.

  • This filter is located outside the ADVANTAGE PLUS Endoscope Reprocessor
  • When looking at the pre-filtration it is located on the far left
  • It needs to be changed every 6 months or sooner if poor water conditions exist
  • Always keep one on hand and a water line disinfectant process must be performed when changing this filter

  • MF01-0069: STERIS Corporation: OEM Acquisition
Product Overview

Water filters should be replaced at a minimum every three months for the 1.0 micron and 0.4 micron filters and every six months for the 0.1 micron filter. If the water pressure drops below 40 PSI or the difference between the gauges is greater than 5 PSI the corresponding filter needs to be replaced. The following conditions must be met before changing a filter: 1. No endoscope reprocessing cycles are running; 2. No water line disinfection procedure is running.

  • This filter is located outside the ADVANTAGE PLUS Endoscope Reprocessor
  • When looking at the pre-filtration it is located on the far left
  • It needs to be changed every 6 months or sooner if poor water conditions exist
  • Always keep one on hand and a water line disinfectant process must be performed when changing this filter

Technical Specs
P/N: MF010069 Key Specs
Item
0.1 MICRON, 2.5" X 10", BACTERIAL RETENTION FILTER
OEM
Medivators (Cantel Medical) (now STERIS)
OEM #
MF010069
Condition
New Aftermarket
Returnable
Yes
Warranty
As Is
Micron Rating
0.1 um
Equivalents

Water filters should be replaced at a minimum every three months for the 1.0 micron and 0.4 micron filters and every six months for the 0.1 micron filter. If the water pressure drops below 40 PSI or the difference between the gauges is greater than 5 PSI the corresponding filter needs to be replaced. The following conditions must be met before changing a filter: 1. No endoscope reprocessing cycles are running; 2. No water line disinfection procedure is running.

  • This filter is located outside the ADVANTAGE PLUS Endoscope Reprocessor
  • When looking at the pre-filtration it is located on the far left
  • It needs to be changed every 6 months or sooner if poor water conditions exist
  • Always keep one on hand and a water line disinfectant process must be performed when changing this filter

  • MF01-0069: STERIS Corporation: OEM Acquisition
Product Overview

Water filters should be replaced at a minimum every three months for the 1.0 micron and 0.4 micron filters and every six months for the 0.1 micron filter. If the water pressure drops below 40 PSI or the difference between the gauges is greater than 5 PSI the corresponding filter needs to be replaced. The following conditions must be met before changing a filter: 1. No endoscope reprocessing cycles are running; 2. No water line disinfection procedure is running.

  • This filter is located outside the ADVANTAGE PLUS Endoscope Reprocessor
  • When looking at the pre-filtration it is located on the far left
  • It needs to be changed every 6 months or sooner if poor water conditions exist
  • Always keep one on hand and a water line disinfectant process must be performed when changing this filter

Technical Specs
P/N: MF010069 Key Specs
Item
0.1 MICRON, 2.5" X 10", BACTERIAL RETENTION FILTER
OEM
Medivators (Cantel Medical) (now STERIS)
OEM #
MF010069
Condition
New Aftermarket
Returnable
Yes
Warranty
As Is
Micron Rating
0.1 um
Equivalents

Water filters should be replaced at a minimum every three months for the 1.0 micron and 0.4 micron filters and every six months for the 0.1 micron filter. If the water pressure drops below 40 PSI or the difference between the gauges is greater than 5 PSI the corresponding filter needs to be replaced. The following conditions must be met before changing a filter: 1. No endoscope reprocessing cycles are running; 2. No water line disinfection procedure is running.

  • This filter is located outside the ADVANTAGE PLUS Endoscope Reprocessor
  • When looking at the pre-filtration it is located on the far left
  • It needs to be changed every 6 months or sooner if poor water conditions exist
  • Always keep one on hand and a water line disinfectant process must be performed when changing this filter

  • MF01-0069: STERIS Corporation: OEM Acquisition