Sign InRegister
Departments
Solutions
PRO
Browsing History
Main Menu
Batteries
Biomedical
Cables & Sensors
Computers & Electronics
Facilities & Workspaces
Laboratory
Lighting & Bulbs
Medical Imaging
Minor Equipment
On-Site Service
Repair
Training
Shop by OEM
Shop by Model
Main Menu
Provider
Supplier
Government
Partners
GPOs
Resources
About
Main Menu
About PartsSource PRO
On-Demand Parts
On-Demand Service
Repair & Service Agreements
Main Menu
My Account
Orders
Parts Quotes
Depot Repairs & Quotes
On-Site Service
Submit Work Orders
Exchanges & Returns
Settings
Main Menu
Month over Month Spend
Prior Rebates
Main Menu
My Lists
Create New List
OEM#: M1125005.00New OEM Original Outright
1/17 HP, 150 RPM, 90VDC, TENV, PZ, 12:1 RATIO, 24 IN-LBS by Leeson
Your price:
$582.68 eachEstimated to ship by 12/26 if ordered before 10:30 AM EST
OEM#: M1125005.001/17 HP, 150 RPM, 90VDC, TENV, PZ, 12:1 RATIO, 24 IN-LBS by Leeson
New OEM Original Outright
Your price:
$582.68 each
Estimated to ship by 12/26 if ordered before 10:30 AM EST
Asset Information
ADD TO LIST
Product Overview
Leeson M1125005.00, 1/17 HP, 150 RPM, 90VDC, TENV, PZ, 12:1 Ratio, 24 In-Lbs
DC Gearmotor with Parallel Shaft. 1/17HP, 150 RPM, Gear Ratio 12 to 1, Overhung Load 180 Pounds, 24 Lb. In. Full Load Torque, Totally-Enclosed Non-Ventilated (TENV) Enclosure, 30 Frame, 90V, Name Plate Amps 0.8.
Totally enclosed, permanent magnet DC gearmotors, performance matched for continuous duty. Feature precision machined in-line steel gears, with a first stage steel helical gear followed by spur-type gears. Lubrication is permanent semi-fluid grease, reducing possibility of leakage. Output shafts have needle bearings for high load capacities. Shafts are hardened steel. Conduit box not included with motor.
Designed for mounting at an angle, but motor below the reducer should be avoided to prevent leakage of lubricant into the motor should the motor shaft seal fail. The motor's stall torque could exceed recommended full load torques. If this service is anticipated, a current limiting device should be used. Overhung load capacities shown are at center of output shaft.
| Compatibility |
| Bison: 011-190-0013 |
| Bodine: 158(Leeson armature voltage is 90V DC ) | 187(Leeson armature voltage is 90V DC ) | 188(Leeson armature voltage is 90V DC ) | 192(Leeson armature voltage is 90V DC ) |
| Grainger/Dayton: 6Z916(Install conduit box kit M1760007 , Leeson does not have tapped-hole (as standard) for pulse generator ) |
| Minarik: 507-01-128 | 507-01-129 |
Technical Specs
P/N: M1125005.00 Key Specs
Item
1/17 HP, 150 RPM, 90VDC, TENV, PZ, 12:1 RATIO, 24 IN-LBS
OEM
Leeson
OEM #
M1125005.00
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Ambient Temp C
40
Country of Origin
USA
Csa
Yes
Duty
Continuous
Enclosure
TENV
Enclosure Type
Totally Enclosed
Fl Amps
0.8
Frame Material
Steel
Gear Motor Rpm
150
Gearhead / Shaft Type
Parallel
Horsepower
1/17
Hp Range
1/20 to 1/16
Insulation Class
F
Is_Motor
Yes
Model
985.629
Output Torque (In-Lbs)
24
Overhung Load (Lbs.)
180
Ratio To 1
12
Rotation
Reversible
Rpm Range
0-1000
Series
PZ
Service Factor
1
Type & Frame Style
PZ2-30B
Ul
Yes
Voltage
90
Weight Lbs
7
Leeson M1125005.00, 1/17 HP, 150 RPM, 90VDC, TENV, PZ, 12:1 Ratio, 24 In-Lbs
DC Gearmotor with Parallel Shaft. 1/17HP, 150 RPM, Gear Ratio 12 to 1, Overhung Load 180 Pounds, 24 Lb. In. Full Load Torque, Totally-Enclosed Non-Ventilated (TENV) Enclosure, 30 Frame, 90V, Name Plate Amps 0.8.
Totally enclosed, permanent magnet DC gearmotors, performance matched for continuous duty. Feature precision machined in-line steel gears, with a first stage steel helical gear followed by spur-type gears. Lubrication is permanent semi-fluid grease, reducing possibility of leakage. Output shafts have needle bearings for high load capacities. Shafts are hardened steel. Conduit box not included with motor.
Designed for mounting at an angle, but motor below the reducer should be avoided to prevent leakage of lubricant into the motor should the motor shaft seal fail. The motor's stall torque could exceed recommended full load torques. If this service is anticipated, a current limiting device should be used. Overhung load capacities shown are at center of output shaft.
| Compatibility |
| Bison: 011-190-0013 |
| Bodine: 158(Leeson armature voltage is 90V DC ) | 187(Leeson armature voltage is 90V DC ) | 188(Leeson armature voltage is 90V DC ) | 192(Leeson armature voltage is 90V DC ) |
| Grainger/Dayton: 6Z916(Install conduit box kit M1760007 , Leeson does not have tapped-hole (as standard) for pulse generator ) |
| Minarik: 507-01-128 | 507-01-129 |
Product Overview
Leeson M1125005.00, 1/17 HP, 150 RPM, 90VDC, TENV, PZ, 12:1 Ratio, 24 In-Lbs
DC Gearmotor with Parallel Shaft. 1/17HP, 150 RPM, Gear Ratio 12 to 1, Overhung Load 180 Pounds, 24 Lb. In. Full Load Torque, Totally-Enclosed Non-Ventilated (TENV) Enclosure, 30 Frame, 90V, Name Plate Amps 0.8.
Totally enclosed, permanent magnet DC gearmotors, performance matched for continuous duty. Feature precision machined in-line steel gears, with a first stage steel helical gear followed by spur-type gears. Lubrication is permanent semi-fluid grease, reducing possibility of leakage. Output shafts have needle bearings for high load capacities. Shafts are hardened steel. Conduit box not included with motor.
Designed for mounting at an angle, but motor below the reducer should be avoided to prevent leakage of lubricant into the motor should the motor shaft seal fail. The motor's stall torque could exceed recommended full load torques. If this service is anticipated, a current limiting device should be used. Overhung load capacities shown are at center of output shaft.
| Compatibility |
| Bison: 011-190-0013 |
| Bodine: 158(Leeson armature voltage is 90V DC ) | 187(Leeson armature voltage is 90V DC ) | 188(Leeson armature voltage is 90V DC ) | 192(Leeson armature voltage is 90V DC ) |
| Grainger/Dayton: 6Z916(Install conduit box kit M1760007 , Leeson does not have tapped-hole (as standard) for pulse generator ) |
| Minarik: 507-01-128 | 507-01-129 |
Technical Specs
P/N: M1125005.00 Key Specs
Item
1/17 HP, 150 RPM, 90VDC, TENV, PZ, 12:1 RATIO, 24 IN-LBS
OEM
Leeson
OEM #
M1125005.00
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Ambient Temp C
40
Country of Origin
USA
Csa
Yes
Duty
Continuous
Enclosure
TENV
Enclosure Type
Totally Enclosed
Fl Amps
0.8
Frame Material
Steel
Gear Motor Rpm
150
Gearhead / Shaft Type
Parallel
Horsepower
1/17
Hp Range
1/20 to 1/16
Insulation Class
F
Is_Motor
Yes
Model
985.629
Output Torque (In-Lbs)
24
Overhung Load (Lbs.)
180
Ratio To 1
12
Rotation
Reversible
Rpm Range
0-1000
Series
PZ
Service Factor
1
Type & Frame Style
PZ2-30B
Ul
Yes
Voltage
90
Weight Lbs
7
Leeson M1125005.00, 1/17 HP, 150 RPM, 90VDC, TENV, PZ, 12:1 Ratio, 24 In-Lbs
DC Gearmotor with Parallel Shaft. 1/17HP, 150 RPM, Gear Ratio 12 to 1, Overhung Load 180 Pounds, 24 Lb. In. Full Load Torque, Totally-Enclosed Non-Ventilated (TENV) Enclosure, 30 Frame, 90V, Name Plate Amps 0.8.
Totally enclosed, permanent magnet DC gearmotors, performance matched for continuous duty. Feature precision machined in-line steel gears, with a first stage steel helical gear followed by spur-type gears. Lubrication is permanent semi-fluid grease, reducing possibility of leakage. Output shafts have needle bearings for high load capacities. Shafts are hardened steel. Conduit box not included with motor.
Designed for mounting at an angle, but motor below the reducer should be avoided to prevent leakage of lubricant into the motor should the motor shaft seal fail. The motor's stall torque could exceed recommended full load torques. If this service is anticipated, a current limiting device should be used. Overhung load capacities shown are at center of output shaft.
| Compatibility |
| Bison: 011-190-0013 |
| Bodine: 158(Leeson armature voltage is 90V DC ) | 187(Leeson armature voltage is 90V DC ) | 188(Leeson armature voltage is 90V DC ) | 192(Leeson armature voltage is 90V DC ) |
| Grainger/Dayton: 6Z916(Install conduit box kit M1760007 , Leeson does not have tapped-hole (as standard) for pulse generator ) |
| Minarik: 507-01-128 | 507-01-129 |
Product Overview
Leeson M1125005.00, 1/17 HP, 150 RPM, 90VDC, TENV, PZ, 12:1 Ratio, 24 In-Lbs
DC Gearmotor with Parallel Shaft. 1/17HP, 150 RPM, Gear Ratio 12 to 1, Overhung Load 180 Pounds, 24 Lb. In. Full Load Torque, Totally-Enclosed Non-Ventilated (TENV) Enclosure, 30 Frame, 90V, Name Plate Amps 0.8.
Totally enclosed, permanent magnet DC gearmotors, performance matched for continuous duty. Feature precision machined in-line steel gears, with a first stage steel helical gear followed by spur-type gears. Lubrication is permanent semi-fluid grease, reducing possibility of leakage. Output shafts have needle bearings for high load capacities. Shafts are hardened steel. Conduit box not included with motor.
Designed for mounting at an angle, but motor below the reducer should be avoided to prevent leakage of lubricant into the motor should the motor shaft seal fail. The motor's stall torque could exceed recommended full load torques. If this service is anticipated, a current limiting device should be used. Overhung load capacities shown are at center of output shaft.
| Compatibility |
| Bison: 011-190-0013 |
| Bodine: 158(Leeson armature voltage is 90V DC ) | 187(Leeson armature voltage is 90V DC ) | 188(Leeson armature voltage is 90V DC ) | 192(Leeson armature voltage is 90V DC ) |
| Grainger/Dayton: 6Z916(Install conduit box kit M1760007 , Leeson does not have tapped-hole (as standard) for pulse generator ) |
| Minarik: 507-01-128 | 507-01-129 |
Technical Specs
P/N: M1125005.00 Key Specs
Item
1/17 HP, 150 RPM, 90VDC, TENV, PZ, 12:1 RATIO, 24 IN-LBS
OEM
Leeson
OEM #
M1125005.00
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Ambient Temp C
40
Country of Origin
USA
Csa
Yes
Duty
Continuous
Enclosure
TENV
Enclosure Type
Totally Enclosed
Fl Amps
0.8
Frame Material
Steel
Gear Motor Rpm
150
Gearhead / Shaft Type
Parallel
Horsepower
1/17
Hp Range
1/20 to 1/16
Insulation Class
F
Is_Motor
Yes
Model
985.629
Output Torque (In-Lbs)
24
Overhung Load (Lbs.)
180
Ratio To 1
12
Rotation
Reversible
Rpm Range
0-1000
Series
PZ
Service Factor
1
Type & Frame Style
PZ2-30B
Ul
Yes
Voltage
90
Weight Lbs
7
Leeson M1125005.00, 1/17 HP, 150 RPM, 90VDC, TENV, PZ, 12:1 Ratio, 24 In-Lbs
DC Gearmotor with Parallel Shaft. 1/17HP, 150 RPM, Gear Ratio 12 to 1, Overhung Load 180 Pounds, 24 Lb. In. Full Load Torque, Totally-Enclosed Non-Ventilated (TENV) Enclosure, 30 Frame, 90V, Name Plate Amps 0.8.
Totally enclosed, permanent magnet DC gearmotors, performance matched for continuous duty. Feature precision machined in-line steel gears, with a first stage steel helical gear followed by spur-type gears. Lubrication is permanent semi-fluid grease, reducing possibility of leakage. Output shafts have needle bearings for high load capacities. Shafts are hardened steel. Conduit box not included with motor.
Designed for mounting at an angle, but motor below the reducer should be avoided to prevent leakage of lubricant into the motor should the motor shaft seal fail. The motor's stall torque could exceed recommended full load torques. If this service is anticipated, a current limiting device should be used. Overhung load capacities shown are at center of output shaft.
| Compatibility |
| Bison: 011-190-0013 |
| Bodine: 158(Leeson armature voltage is 90V DC ) | 187(Leeson armature voltage is 90V DC ) | 188(Leeson armature voltage is 90V DC ) | 192(Leeson armature voltage is 90V DC ) |
| Grainger/Dayton: 6Z916(Install conduit box kit M1760007 , Leeson does not have tapped-hole (as standard) for pulse generator ) |
| Minarik: 507-01-128 | 507-01-129 |