OEM#: TAF61212New OEM Original Outright

MACHINED TYPE NEEDLE ROLLER BEARING METRIC 6MM BORE, 12MM OD 12MM W by IKO International

Your price:
$18.68 eachEstimated to ship by 10/31 if ordered before 10:30 AM EST
HomeIKO Internationaltaf61212
MACHINED TYPE NEEDLE ROLLER BEARING METRIC 6MM BORE, 12MM OD 12MM W by IKO International
MACHINED TYPE NEEDLE ROLLER BEARING METRIC 6MM BORE, 12MM OD 12MM W by IKO International

OEM#: TAF61212
MACHINED TYPE NEEDLE ROLLER BEARING METRIC 6MM BORE, 12MM OD 12MM W by IKO International

New OEM Original Outright
Your price:
$18.68 each
Estimated to ship by 10/31 if ordered before 10:30 AM EST
Asset Information

Must purchase minimum of 4

ADD TO LIST
Product Overview

IKO Machined Type Needle Roller Bearing METRIC 6mm Bore, 12mm OD 12mm W

IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and rigidity, and come with no seals. Proper lubricant must be applied when they are used, as prepacked grease is not provided for these series. GTR series are full compliment bearings with mallet-shaped rollers that are guided by guide rail and groove to minimize skewing. These bearings are suitable for applications with heavy loads, shock loads or oscillating motions. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2µmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

Technical Specs
P/N: TAF61212 Key Specs
Item
MACHINED TYPE NEEDLE ROLLER BEARING METRIC 6MM BORE, 12MM OD 12MM W
OEM
IKO International
OEM #
TAF61212
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Bore (Mm)
6
Bore Tolerance (Mm)
+0.018 / +0.010
Country of Origin
Japan
Dynamic Load Rating (N)
3440
Housing Shoulder Dia Max (Mm)
10.4
Max Speed / Grease (Rpm)
42000
Max Speed / Oil (Rpm)
70000
O.D. Tolerance (Mm)
+0 / -0.008
Od Mm (Inch)
12
Outer Ring Corner Radius Min. (Mm)
0.2
Series
TAF
Static Load (N)
3170
Tolerance
ISO Class 0
Width (C) Tolerance (Mm)
+0 / -0.120
Width (Mm)
12

IKO Machined Type Needle Roller Bearing METRIC 6mm Bore, 12mm OD 12mm W

IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and rigidity, and come with no seals. Proper lubricant must be applied when they are used, as prepacked grease is not provided for these series. GTR series are full compliment bearings with mallet-shaped rollers that are guided by guide rail and groove to minimize skewing. These bearings are suitable for applications with heavy loads, shock loads or oscillating motions. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2µmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

    Product Overview

    IKO Machined Type Needle Roller Bearing METRIC 6mm Bore, 12mm OD 12mm W

    IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and rigidity, and come with no seals. Proper lubricant must be applied when they are used, as prepacked grease is not provided for these series. GTR series are full compliment bearings with mallet-shaped rollers that are guided by guide rail and groove to minimize skewing. These bearings are suitable for applications with heavy loads, shock loads or oscillating motions. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2µmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

    Technical Specs
    P/N: TAF61212 Key Specs
    Item
    MACHINED TYPE NEEDLE ROLLER BEARING METRIC 6MM BORE, 12MM OD 12MM W
    OEM
    IKO International
    OEM #
    TAF61212
    Condition
    New OEM Original
    Returnable
    No
    Warranty
    Mfr Warranty
    Bore (Mm)
    6
    Bore Tolerance (Mm)
    +0.018 / +0.010
    Country of Origin
    Japan
    Dynamic Load Rating (N)
    3440
    Housing Shoulder Dia Max (Mm)
    10.4
    Max Speed / Grease (Rpm)
    42000
    Max Speed / Oil (Rpm)
    70000
    O.D. Tolerance (Mm)
    +0 / -0.008
    Od Mm (Inch)
    12
    Outer Ring Corner Radius Min. (Mm)
    0.2
    Series
    TAF
    Static Load (N)
    3170
    Tolerance
    ISO Class 0
    Width (C) Tolerance (Mm)
    +0 / -0.120
    Width (Mm)
    12

    IKO Machined Type Needle Roller Bearing METRIC 6mm Bore, 12mm OD 12mm W

    IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and rigidity, and come with no seals. Proper lubricant must be applied when they are used, as prepacked grease is not provided for these series. GTR series are full compliment bearings with mallet-shaped rollers that are guided by guide rail and groove to minimize skewing. These bearings are suitable for applications with heavy loads, shock loads or oscillating motions. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2µmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

      Product Overview

      IKO Machined Type Needle Roller Bearing METRIC 6mm Bore, 12mm OD 12mm W

      IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and rigidity, and come with no seals. Proper lubricant must be applied when they are used, as prepacked grease is not provided for these series. GTR series are full compliment bearings with mallet-shaped rollers that are guided by guide rail and groove to minimize skewing. These bearings are suitable for applications with heavy loads, shock loads or oscillating motions. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2µmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

      Technical Specs
      P/N: TAF61212 Key Specs
      Item
      MACHINED TYPE NEEDLE ROLLER BEARING METRIC 6MM BORE, 12MM OD 12MM W
      OEM
      IKO International
      OEM #
      TAF61212
      Condition
      New OEM Original
      Returnable
      No
      Warranty
      Mfr Warranty
      Bore (Mm)
      6
      Bore Tolerance (Mm)
      +0.018 / +0.010
      Country of Origin
      Japan
      Dynamic Load Rating (N)
      3440
      Housing Shoulder Dia Max (Mm)
      10.4
      Max Speed / Grease (Rpm)
      42000
      Max Speed / Oil (Rpm)
      70000
      O.D. Tolerance (Mm)
      +0 / -0.008
      Od Mm (Inch)
      12
      Outer Ring Corner Radius Min. (Mm)
      0.2
      Series
      TAF
      Static Load (N)
      3170
      Tolerance
      ISO Class 0
      Width (C) Tolerance (Mm)
      +0 / -0.120
      Width (Mm)
      12

      IKO Machined Type Needle Roller Bearing METRIC 6mm Bore, 12mm OD 12mm W

      IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and rigidity, and come with no seals. Proper lubricant must be applied when they are used, as prepacked grease is not provided for these series. GTR series are full compliment bearings with mallet-shaped rollers that are guided by guide rail and groove to minimize skewing. These bearings are suitable for applications with heavy loads, shock loads or oscillating motions. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2µmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.