OEM#: TA820ZNew OEM Original Outright

SHELL TYPE NEEDLE ROLLER BEARING METRIC, HEAVY DUTY, 8MM BORE, 15MM OD, 20MM WIDTH by IKO International

Your price:
$12.94 eachEstimated to ship by 12/02 if ordered before 10:30 AM EST
HomeIKO Internationalta820z
SHELL TYPE NEEDLE ROLLER BEARING METRIC, HEAVY DUTY, 8MM BORE, 15MM OD, 20MM WIDTH by IKO International
SHELL TYPE NEEDLE ROLLER BEARING METRIC, HEAVY DUTY, 8MM BORE, 15MM OD, 20MM WIDTH by IKO International

OEM#: TA820Z
SHELL TYPE NEEDLE ROLLER BEARING METRIC, HEAVY DUTY, 8MM BORE, 15MM OD, 20MM WIDTH by IKO International

New OEM Original Outright
Your price:
$12.94 each
Estimated to ship by 12/02 if ordered before 10:30 AM EST
Asset Information

Must purchase minimum of 4

ADD TO LIST
Product Overview

IKO Shell Type Needle Roller Bearing METRIC, Heavy Duty, 8mm Bore, 15mm OD, 20mm Width, Part# TA820Z

IKO Shell Type Needle Roller Bearing (often called Drawn Cup) consists of outer ring that is made from accurately drawn thin special steel plate, needle rollers and with or without retainer. The Shell Type Needle Roller Bearings have smallest sectional height and weight among all of needle roller bearings, and have relatively high load ratings. Needle roller bearing with retainer can be used for high-speed applications as the retainer and the thrust ring precisely guide the rollers. Shell Type Needle Roller Bearings are not provided with pre-packed lubricant. Proper lubrication must be applied when these bearings are used. Shell Type needle roller bearings are generally used with shafts without inner rings. 0.2?mRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

Accuracy: The outer ring of Shell Type Needle Roller Bearings cannot avoid deformation by heat treatment due to their thin cross sections. It is not appropriate to take a direct measurement on the outer ring. Use Standard Mounting Dimensions shown for shaft and housing diameters. Tolerance of outer ring Width is +0 to -0.20 mm.

Technical Specs
P/N: TA820Z Key Specs
Item
SHELL TYPE NEEDLE ROLLER BEARING METRIC, HEAVY DUTY, 8MM BORE, 15MM OD, 20MM WIDTH
OEM
IKO International
OEM #
TA820Z
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Bore (Mm)
8
Country of Origin
Japan
Dynamic Load Rating (N)
8340
Housing Max (Mm)
15.01
Housing Min (Mm)
14.992
Max Speed / Grease (Rpm)
27000
Max Speed / Oil (Rpm)
45000
Od (Mm)
15
Shaft Max (Mm)
8
Shaft Min (Mm)
7.991
Static Load Rating (N)
8920
Width (Mm)
20

IKO Shell Type Needle Roller Bearing METRIC, Heavy Duty, 8mm Bore, 15mm OD, 20mm Width, Part# TA820Z

IKO Shell Type Needle Roller Bearing (often called Drawn Cup) consists of outer ring that is made from accurately drawn thin special steel plate, needle rollers and with or without retainer. The Shell Type Needle Roller Bearings have smallest sectional height and weight among all of needle roller bearings, and have relatively high load ratings. Needle roller bearing with retainer can be used for high-speed applications as the retainer and the thrust ring precisely guide the rollers. Shell Type Needle Roller Bearings are not provided with pre-packed lubricant. Proper lubrication must be applied when these bearings are used. Shell Type needle roller bearings are generally used with shafts without inner rings. 0.2?mRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

Accuracy: The outer ring of Shell Type Needle Roller Bearings cannot avoid deformation by heat treatment due to their thin cross sections. It is not appropriate to take a direct measurement on the outer ring. Use Standard Mounting Dimensions shown for shaft and housing diameters. Tolerance of outer ring Width is +0 to -0.20 mm.

    Product Overview

    IKO Shell Type Needle Roller Bearing METRIC, Heavy Duty, 8mm Bore, 15mm OD, 20mm Width, Part# TA820Z

    IKO Shell Type Needle Roller Bearing (often called Drawn Cup) consists of outer ring that is made from accurately drawn thin special steel plate, needle rollers and with or without retainer. The Shell Type Needle Roller Bearings have smallest sectional height and weight among all of needle roller bearings, and have relatively high load ratings. Needle roller bearing with retainer can be used for high-speed applications as the retainer and the thrust ring precisely guide the rollers. Shell Type Needle Roller Bearings are not provided with pre-packed lubricant. Proper lubrication must be applied when these bearings are used. Shell Type needle roller bearings are generally used with shafts without inner rings. 0.2?mRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

    Accuracy: The outer ring of Shell Type Needle Roller Bearings cannot avoid deformation by heat treatment due to their thin cross sections. It is not appropriate to take a direct measurement on the outer ring. Use Standard Mounting Dimensions shown for shaft and housing diameters. Tolerance of outer ring Width is +0 to -0.20 mm.

    Technical Specs
    P/N: TA820Z Key Specs
    Item
    SHELL TYPE NEEDLE ROLLER BEARING METRIC, HEAVY DUTY, 8MM BORE, 15MM OD, 20MM WIDTH
    OEM
    IKO International
    OEM #
    TA820Z
    Condition
    New OEM Original
    Returnable
    No
    Warranty
    Mfr Warranty
    Bore (Mm)
    8
    Country of Origin
    Japan
    Dynamic Load Rating (N)
    8340
    Housing Max (Mm)
    15.01
    Housing Min (Mm)
    14.992
    Max Speed / Grease (Rpm)
    27000
    Max Speed / Oil (Rpm)
    45000
    Od (Mm)
    15
    Shaft Max (Mm)
    8
    Shaft Min (Mm)
    7.991
    Static Load Rating (N)
    8920
    Width (Mm)
    20

    IKO Shell Type Needle Roller Bearing METRIC, Heavy Duty, 8mm Bore, 15mm OD, 20mm Width, Part# TA820Z

    IKO Shell Type Needle Roller Bearing (often called Drawn Cup) consists of outer ring that is made from accurately drawn thin special steel plate, needle rollers and with or without retainer. The Shell Type Needle Roller Bearings have smallest sectional height and weight among all of needle roller bearings, and have relatively high load ratings. Needle roller bearing with retainer can be used for high-speed applications as the retainer and the thrust ring precisely guide the rollers. Shell Type Needle Roller Bearings are not provided with pre-packed lubricant. Proper lubrication must be applied when these bearings are used. Shell Type needle roller bearings are generally used with shafts without inner rings. 0.2?mRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

    Accuracy: The outer ring of Shell Type Needle Roller Bearings cannot avoid deformation by heat treatment due to their thin cross sections. It is not appropriate to take a direct measurement on the outer ring. Use Standard Mounting Dimensions shown for shaft and housing diameters. Tolerance of outer ring Width is +0 to -0.20 mm.

      Product Overview

      IKO Shell Type Needle Roller Bearing METRIC, Heavy Duty, 8mm Bore, 15mm OD, 20mm Width, Part# TA820Z

      IKO Shell Type Needle Roller Bearing (often called Drawn Cup) consists of outer ring that is made from accurately drawn thin special steel plate, needle rollers and with or without retainer. The Shell Type Needle Roller Bearings have smallest sectional height and weight among all of needle roller bearings, and have relatively high load ratings. Needle roller bearing with retainer can be used for high-speed applications as the retainer and the thrust ring precisely guide the rollers. Shell Type Needle Roller Bearings are not provided with pre-packed lubricant. Proper lubrication must be applied when these bearings are used. Shell Type needle roller bearings are generally used with shafts without inner rings. 0.2?mRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

      Accuracy: The outer ring of Shell Type Needle Roller Bearings cannot avoid deformation by heat treatment due to their thin cross sections. It is not appropriate to take a direct measurement on the outer ring. Use Standard Mounting Dimensions shown for shaft and housing diameters. Tolerance of outer ring Width is +0 to -0.20 mm.

      Technical Specs
      P/N: TA820Z Key Specs
      Item
      SHELL TYPE NEEDLE ROLLER BEARING METRIC, HEAVY DUTY, 8MM BORE, 15MM OD, 20MM WIDTH
      OEM
      IKO International
      OEM #
      TA820Z
      Condition
      New OEM Original
      Returnable
      No
      Warranty
      Mfr Warranty
      Bore (Mm)
      8
      Country of Origin
      Japan
      Dynamic Load Rating (N)
      8340
      Housing Max (Mm)
      15.01
      Housing Min (Mm)
      14.992
      Max Speed / Grease (Rpm)
      27000
      Max Speed / Oil (Rpm)
      45000
      Od (Mm)
      15
      Shaft Max (Mm)
      8
      Shaft Min (Mm)
      7.991
      Static Load Rating (N)
      8920
      Width (Mm)
      20

      IKO Shell Type Needle Roller Bearing METRIC, Heavy Duty, 8mm Bore, 15mm OD, 20mm Width, Part# TA820Z

      IKO Shell Type Needle Roller Bearing (often called Drawn Cup) consists of outer ring that is made from accurately drawn thin special steel plate, needle rollers and with or without retainer. The Shell Type Needle Roller Bearings have smallest sectional height and weight among all of needle roller bearings, and have relatively high load ratings. Needle roller bearing with retainer can be used for high-speed applications as the retainer and the thrust ring precisely guide the rollers. Shell Type Needle Roller Bearings are not provided with pre-packed lubricant. Proper lubrication must be applied when these bearings are used. Shell Type needle roller bearings are generally used with shafts without inner rings. 0.2?mRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

      Accuracy: The outer ring of Shell Type Needle Roller Bearings cannot avoid deformation by heat treatment due to their thin cross sections. It is not appropriate to take a direct measurement on the outer ring. Use Standard Mounting Dimensions shown for shaft and housing diameters. Tolerance of outer ring Width is +0 to -0.20 mm.