Repair

MACHINED TYPE NEEDLE ROLLER BEARING METRIC, 32MM BORE, 45MM OD

HomeIKO Internationalrna4928b1498735
MACHINED TYPE NEEDLE ROLLER BEARING METRIC, 32MM BORE, 45MM OD
MACHINED TYPE NEEDLE ROLLER BEARING METRIC, 32MM BORE, 45MM OD

MACHINED TYPE NEEDLE ROLLER BEARING METRIC, 32MM BORE, 45MM OD

Product Overview

IKO Machined Type Needle Roller Bearing METRIC RNA49/28, 32mm Bore, 45mm OD

IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and rigidity, and most of them come with seals. Prepacked lubricant is not provided except double sealed bearings (suffix UU). Proper lubricant must be applied when they are used. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2µmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

Technical Specs
P/N: RNA49/28 Key Specs
Item
MACHINED TYPE NEEDLE ROLLER BEARING METRIC, 32MM BORE, 45MM OD
OEM
IKO International
OEM #
RNA49/28
Returnable
No
Warranty
Bore (Fw) Mm/Inch
32
Dynamic Load Rating (N)
24500
Max Speed / Grease (Rpm)
7200
Od Mm (Inch)
45
Product Type
Machined Bearings RNA
Series
RNA49
Static Load (N)
32700
Width (Mm)
17

IKO Machined Type Needle Roller Bearing METRIC RNA49/28, 32mm Bore, 45mm OD

IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and rigidity, and most of them come with seals. Prepacked lubricant is not provided except double sealed bearings (suffix UU). Proper lubricant must be applied when they are used. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2µmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

    Product Overview

    IKO Machined Type Needle Roller Bearing METRIC RNA49/28, 32mm Bore, 45mm OD

    IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and rigidity, and most of them come with seals. Prepacked lubricant is not provided except double sealed bearings (suffix UU). Proper lubricant must be applied when they are used. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2µmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

    Technical Specs
    P/N: RNA49/28 Key Specs
    Item
    MACHINED TYPE NEEDLE ROLLER BEARING METRIC, 32MM BORE, 45MM OD
    OEM
    IKO International
    OEM #
    RNA49/28
    Returnable
    No
    Warranty
    Bore (Fw) Mm/Inch
    32
    Dynamic Load Rating (N)
    24500
    Max Speed / Grease (Rpm)
    7200
    Od Mm (Inch)
    45
    Product Type
    Machined Bearings RNA
    Series
    RNA49
    Static Load (N)
    32700
    Width (Mm)
    17

    IKO Machined Type Needle Roller Bearing METRIC RNA49/28, 32mm Bore, 45mm OD

    IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and rigidity, and most of them come with seals. Prepacked lubricant is not provided except double sealed bearings (suffix UU). Proper lubricant must be applied when they are used. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2µmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

      Product Overview

      IKO Machined Type Needle Roller Bearing METRIC RNA49/28, 32mm Bore, 45mm OD

      IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and rigidity, and most of them come with seals. Prepacked lubricant is not provided except double sealed bearings (suffix UU). Proper lubricant must be applied when they are used. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2µmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

      Technical Specs
      P/N: RNA49/28 Key Specs
      Item
      MACHINED TYPE NEEDLE ROLLER BEARING METRIC, 32MM BORE, 45MM OD
      OEM
      IKO International
      OEM #
      RNA49/28
      Returnable
      No
      Warranty
      Bore (Fw) Mm/Inch
      32
      Dynamic Load Rating (N)
      24500
      Max Speed / Grease (Rpm)
      7200
      Od Mm (Inch)
      45
      Product Type
      Machined Bearings RNA
      Series
      RNA49
      Static Load (N)
      32700
      Width (Mm)
      17

      IKO Machined Type Needle Roller Bearing METRIC RNA49/28, 32mm Bore, 45mm OD

      IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and rigidity, and most of them come with seals. Prepacked lubricant is not provided except double sealed bearings (suffix UU). Proper lubricant must be applied when they are used. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2µmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.