OEM#: KT556120C3New OEM Original Outright

NEEDLE ROLLER CAGE ASSEMBLY, 55MM BORE, 61MM OD, 20MM W, STEEL CAGE MATERIAL by IKO International

Your price:
$31.46 eachEstimated to ship by 10/30 if ordered before 10:30 AM EST
HomeIKO Internationalkt556120c3
NEEDLE ROLLER CAGE ASSEMBLY, 55MM BORE, 61MM OD, 20MM W, STEEL CAGE MATERIAL by IKO International
NEEDLE ROLLER CAGE ASSEMBLY, 55MM BORE, 61MM OD, 20MM W, STEEL CAGE MATERIAL by IKO International

OEM#: KT556120C3
NEEDLE ROLLER CAGE ASSEMBLY, 55MM BORE, 61MM OD, 20MM W, STEEL CAGE MATERIAL by IKO International

New OEM Original Outright
Your price:
$31.46 each
Estimated to ship by 10/30 if ordered before 10:30 AM EST
Asset Information

Must purchase minimum of 2

ADD TO LIST
Product Overview

IKO Needle Roller Cage Assembly, 55mm Bore, 61mm OD, 20mm Width, Steel Cage Material

IKO Needle Roller Cage Assembly consists of needle rollers with extremely high accuracy and specially designed cage. These products are suitable to use in limited spaces, combining with shafts and housings. 0.2µmRa or less surface finish and HRC 58 to 64 hardness are recommended for the shaft and housing. If the surface hardness is low, load ratings become lower than values described. Due to their lightweight, high rigidity and lubricant holding design, these products can withstand severe operating conditions such as high speed and shock load.

Technical Specs
P/N: KT556120C3 Key Specs
Item
NEEDLE ROLLER CAGE ASSEMBLY, 55MM BORE, 61MM OD, 20MM W, STEEL CAGE MATERIAL
OEM
IKO International
OEM #
KT556120C3
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Bore (Fw) Mm/Inch
55
Bore (Mm)
+0.029 / +0.010
Cage Material
Steel
Country of Origin
Japan
Dynamic Load Rating (N)
32600
Max Speed / Grease (Rpm)
4500
Max Speed / Oil (Rpm)
9000
Od (Ew) (Mm)
61
Series
KT
Shaft Diameter Mm
+0 / -0.013
Static Load Rating (N)
68500
Temperature Range C
-20 to +120
Tolerance Cage Width (Mm)
-0.20 / -0.55
Tolerance Roller Diameter (Mm)
+0 / -0.003
Width (Bc) (Mm)
20

IKO Needle Roller Cage Assembly, 55mm Bore, 61mm OD, 20mm Width, Steel Cage Material

IKO Needle Roller Cage Assembly consists of needle rollers with extremely high accuracy and specially designed cage. These products are suitable to use in limited spaces, combining with shafts and housings. 0.2µmRa or less surface finish and HRC 58 to 64 hardness are recommended for the shaft and housing. If the surface hardness is low, load ratings become lower than values described. Due to their lightweight, high rigidity and lubricant holding design, these products can withstand severe operating conditions such as high speed and shock load.

    Product Overview

    IKO Needle Roller Cage Assembly, 55mm Bore, 61mm OD, 20mm Width, Steel Cage Material

    IKO Needle Roller Cage Assembly consists of needle rollers with extremely high accuracy and specially designed cage. These products are suitable to use in limited spaces, combining with shafts and housings. 0.2µmRa or less surface finish and HRC 58 to 64 hardness are recommended for the shaft and housing. If the surface hardness is low, load ratings become lower than values described. Due to their lightweight, high rigidity and lubricant holding design, these products can withstand severe operating conditions such as high speed and shock load.

    Technical Specs
    P/N: KT556120C3 Key Specs
    Item
    NEEDLE ROLLER CAGE ASSEMBLY, 55MM BORE, 61MM OD, 20MM W, STEEL CAGE MATERIAL
    OEM
    IKO International
    OEM #
    KT556120C3
    Condition
    New OEM Original
    Returnable
    No
    Warranty
    Mfr Warranty
    Bore (Fw) Mm/Inch
    55
    Bore (Mm)
    +0.029 / +0.010
    Cage Material
    Steel
    Country of Origin
    Japan
    Dynamic Load Rating (N)
    32600
    Max Speed / Grease (Rpm)
    4500
    Max Speed / Oil (Rpm)
    9000
    Od (Ew) (Mm)
    61
    Series
    KT
    Shaft Diameter Mm
    +0 / -0.013
    Static Load Rating (N)
    68500
    Temperature Range C
    -20 to +120
    Tolerance Cage Width (Mm)
    -0.20 / -0.55
    Tolerance Roller Diameter (Mm)
    +0 / -0.003
    Width (Bc) (Mm)
    20

    IKO Needle Roller Cage Assembly, 55mm Bore, 61mm OD, 20mm Width, Steel Cage Material

    IKO Needle Roller Cage Assembly consists of needle rollers with extremely high accuracy and specially designed cage. These products are suitable to use in limited spaces, combining with shafts and housings. 0.2µmRa or less surface finish and HRC 58 to 64 hardness are recommended for the shaft and housing. If the surface hardness is low, load ratings become lower than values described. Due to their lightweight, high rigidity and lubricant holding design, these products can withstand severe operating conditions such as high speed and shock load.

      Product Overview

      IKO Needle Roller Cage Assembly, 55mm Bore, 61mm OD, 20mm Width, Steel Cage Material

      IKO Needle Roller Cage Assembly consists of needle rollers with extremely high accuracy and specially designed cage. These products are suitable to use in limited spaces, combining with shafts and housings. 0.2µmRa or less surface finish and HRC 58 to 64 hardness are recommended for the shaft and housing. If the surface hardness is low, load ratings become lower than values described. Due to their lightweight, high rigidity and lubricant holding design, these products can withstand severe operating conditions such as high speed and shock load.

      Technical Specs
      P/N: KT556120C3 Key Specs
      Item
      NEEDLE ROLLER CAGE ASSEMBLY, 55MM BORE, 61MM OD, 20MM W, STEEL CAGE MATERIAL
      OEM
      IKO International
      OEM #
      KT556120C3
      Condition
      New OEM Original
      Returnable
      No
      Warranty
      Mfr Warranty
      Bore (Fw) Mm/Inch
      55
      Bore (Mm)
      +0.029 / +0.010
      Cage Material
      Steel
      Country of Origin
      Japan
      Dynamic Load Rating (N)
      32600
      Max Speed / Grease (Rpm)
      4500
      Max Speed / Oil (Rpm)
      9000
      Od (Ew) (Mm)
      61
      Series
      KT
      Shaft Diameter Mm
      +0 / -0.013
      Static Load Rating (N)
      68500
      Temperature Range C
      -20 to +120
      Tolerance Cage Width (Mm)
      -0.20 / -0.55
      Tolerance Roller Diameter (Mm)
      +0 / -0.003
      Width (Bc) (Mm)
      20

      IKO Needle Roller Cage Assembly, 55mm Bore, 61mm OD, 20mm Width, Steel Cage Material

      IKO Needle Roller Cage Assembly consists of needle rollers with extremely high accuracy and specially designed cage. These products are suitable to use in limited spaces, combining with shafts and housings. 0.2µmRa or less surface finish and HRC 58 to 64 hardness are recommended for the shaft and housing. If the surface hardness is low, load ratings become lower than values described. Due to their lightweight, high rigidity and lubricant holding design, these products can withstand severe operating conditions such as high speed and shock load.