OEM#: CR48VUUNew OEM Original Outright

CAM FOLLOWER-INCH FULL COMP SCREWDRIVER SLOT DBL SEALED 3" OD 1-3/4"W 1-1/4 - 12 THR by IKO International

Your price:
$141.64 eachEstimated to ship by 12/06 if ordered before 10:30 AM EST
HomeIKO Internationalcr48vuu
CAM FOLLOWER-INCH FULL COMP SCREWDRIVER SLOT DBL SEALED 3" OD 1-3/4"W 1-1/4 - 12 THR by IKO International
CAM FOLLOWER-INCH FULL COMP SCREWDRIVER SLOT DBL SEALED 3" OD 1-3/4"W 1-1/4 - 12 THR by IKO International

OEM#: CR48VUU
CAM FOLLOWER-INCH FULL COMP SCREWDRIVER SLOT DBL SEALED 3" OD 1-3/4"W 1-1/4 - 12 THR by IKO International

New OEM Original Outright
Your price:
$141.64 each
Estimated to ship by 12/06 if ordered before 10:30 AM EST
Asset Information
ADD TO LIST
Product Overview

IKO Cam Follower-INCH, Full Complement, Screwdriver Slot, Double sealed, 3" OD, 1-3/4" Width, 1-1/4 - 12 Thread

IKO Cam Followers consist of needle rollers, stud acting inner ring raceway and thick-walled outer ring to withstand heavy rolling or shock loads. Cam Followers are available with cylindrical or crowned outer rings. The crowned outer ring alleviates uneven loads resulting from deflection, bending or misalignment in mounting. There are two internal designs available; one with a cage for high speed, and another with a full complement for heavy loads. Cam Followers are follower bearings for cam mechanisms or linear motions, and widely used for machine tools, industrial robots, electronic devices and office automation equipment utilizing their high rigidity and accuracy. These cam followers are provided with pre-packed grease. Sufficient lubrication is also needed between cam followers and steel track on which cam followers run, to prevent seizure and to reduce friction. An appropriate nut is supplied with the stud.

Technical Specs
P/N: CR48VUU Key Specs
Item
CAM FOLLOWER-INCH FULL COMP SCREWDRIVER SLOT DBL SEALED 3" OD 1-3/4"W 1-1/4 - 12 THR
OEM
IKO International
OEM #
CR48VUU
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Bearing Style
Cylindrical OD
Clamping Diameter (F) Minimum Mm (Inch)
51.981 (2-3/64)
Corner Radius ( R ) Mm (Inch)
2.381 (3/32)
Country of Origin
Japan
Dimension B
46.4mm (1.83")
Dimension B2
63.500mm (2-1/2?
Dimension B3
15.875mm (5/8")
Dimension C1
1.588mm (1/16")
Dimension G1
6.350mm (1/4")
Dimension G2
4.762mm (3/16")
Dynamic Load Rating (N)
77600
Needle Construction
Full Complement
O.D. Tolerance (Mm)
+0 / -0.25
Od (D) Mm/Inch
76.200 (3)
Oil Hole
Stud Head, End, Outside
Radial Clearance
0.010 to 0.040
Series
CR
Static Load Rating (N)
172000
Stud Diameter (D1) Mm (Inch)
31.750 (1-1/4)
Temperature Range F
-20°-120°F
Thread (G) Unf
1-1/4 - 12
Tolerance For Mounting Hole (Mm / Inch)
+0.050 / +0.025 (+.0020 / +.0010)
Tolerance For Stud Diameter (Mm)
+0.25 / -0
Torque Max (Nm)
500
Track Capacity (N)
64300
Type
Double sealed
Width (C) Mm/Inch
44.450 (1-3/4)
Width (C) Tolerance (Mm)
+0 / -0.130

IKO Cam Follower-INCH, Full Complement, Screwdriver Slot, Double sealed, 3" OD, 1-3/4" Width, 1-1/4 - 12 Thread

IKO Cam Followers consist of needle rollers, stud acting inner ring raceway and thick-walled outer ring to withstand heavy rolling or shock loads. Cam Followers are available with cylindrical or crowned outer rings. The crowned outer ring alleviates uneven loads resulting from deflection, bending or misalignment in mounting. There are two internal designs available; one with a cage for high speed, and another with a full complement for heavy loads. Cam Followers are follower bearings for cam mechanisms or linear motions, and widely used for machine tools, industrial robots, electronic devices and office automation equipment utilizing their high rigidity and accuracy. These cam followers are provided with pre-packed grease. Sufficient lubrication is also needed between cam followers and steel track on which cam followers run, to prevent seizure and to reduce friction. An appropriate nut is supplied with the stud.

    Product Overview

    IKO Cam Follower-INCH, Full Complement, Screwdriver Slot, Double sealed, 3" OD, 1-3/4" Width, 1-1/4 - 12 Thread

    IKO Cam Followers consist of needle rollers, stud acting inner ring raceway and thick-walled outer ring to withstand heavy rolling or shock loads. Cam Followers are available with cylindrical or crowned outer rings. The crowned outer ring alleviates uneven loads resulting from deflection, bending or misalignment in mounting. There are two internal designs available; one with a cage for high speed, and another with a full complement for heavy loads. Cam Followers are follower bearings for cam mechanisms or linear motions, and widely used for machine tools, industrial robots, electronic devices and office automation equipment utilizing their high rigidity and accuracy. These cam followers are provided with pre-packed grease. Sufficient lubrication is also needed between cam followers and steel track on which cam followers run, to prevent seizure and to reduce friction. An appropriate nut is supplied with the stud.

    Technical Specs
    P/N: CR48VUU Key Specs
    Item
    CAM FOLLOWER-INCH FULL COMP SCREWDRIVER SLOT DBL SEALED 3" OD 1-3/4"W 1-1/4 - 12 THR
    OEM
    IKO International
    OEM #
    CR48VUU
    Condition
    New OEM Original
    Returnable
    No
    Warranty
    Mfr Warranty
    Bearing Style
    Cylindrical OD
    Clamping Diameter (F) Minimum Mm (Inch)
    51.981 (2-3/64)
    Corner Radius ( R ) Mm (Inch)
    2.381 (3/32)
    Country of Origin
    Japan
    Dimension B
    46.4mm (1.83")
    Dimension B2
    63.500mm (2-1/2?
    Dimension B3
    15.875mm (5/8")
    Dimension C1
    1.588mm (1/16")
    Dimension G1
    6.350mm (1/4")
    Dimension G2
    4.762mm (3/16")
    Dynamic Load Rating (N)
    77600
    Needle Construction
    Full Complement
    O.D. Tolerance (Mm)
    +0 / -0.25
    Od (D) Mm/Inch
    76.200 (3)
    Oil Hole
    Stud Head, End, Outside
    Radial Clearance
    0.010 to 0.040
    Series
    CR
    Static Load Rating (N)
    172000
    Stud Diameter (D1) Mm (Inch)
    31.750 (1-1/4)
    Temperature Range F
    -20°-120°F
    Thread (G) Unf
    1-1/4 - 12
    Tolerance For Mounting Hole (Mm / Inch)
    +0.050 / +0.025 (+.0020 / +.0010)
    Tolerance For Stud Diameter (Mm)
    +0.25 / -0
    Torque Max (Nm)
    500
    Track Capacity (N)
    64300
    Type
    Double sealed
    Width (C) Mm/Inch
    44.450 (1-3/4)
    Width (C) Tolerance (Mm)
    +0 / -0.130

    IKO Cam Follower-INCH, Full Complement, Screwdriver Slot, Double sealed, 3" OD, 1-3/4" Width, 1-1/4 - 12 Thread

    IKO Cam Followers consist of needle rollers, stud acting inner ring raceway and thick-walled outer ring to withstand heavy rolling or shock loads. Cam Followers are available with cylindrical or crowned outer rings. The crowned outer ring alleviates uneven loads resulting from deflection, bending or misalignment in mounting. There are two internal designs available; one with a cage for high speed, and another with a full complement for heavy loads. Cam Followers are follower bearings for cam mechanisms or linear motions, and widely used for machine tools, industrial robots, electronic devices and office automation equipment utilizing their high rigidity and accuracy. These cam followers are provided with pre-packed grease. Sufficient lubrication is also needed between cam followers and steel track on which cam followers run, to prevent seizure and to reduce friction. An appropriate nut is supplied with the stud.

      Product Overview

      IKO Cam Follower-INCH, Full Complement, Screwdriver Slot, Double sealed, 3" OD, 1-3/4" Width, 1-1/4 - 12 Thread

      IKO Cam Followers consist of needle rollers, stud acting inner ring raceway and thick-walled outer ring to withstand heavy rolling or shock loads. Cam Followers are available with cylindrical or crowned outer rings. The crowned outer ring alleviates uneven loads resulting from deflection, bending or misalignment in mounting. There are two internal designs available; one with a cage for high speed, and another with a full complement for heavy loads. Cam Followers are follower bearings for cam mechanisms or linear motions, and widely used for machine tools, industrial robots, electronic devices and office automation equipment utilizing their high rigidity and accuracy. These cam followers are provided with pre-packed grease. Sufficient lubrication is also needed between cam followers and steel track on which cam followers run, to prevent seizure and to reduce friction. An appropriate nut is supplied with the stud.

      Technical Specs
      P/N: CR48VUU Key Specs
      Item
      CAM FOLLOWER-INCH FULL COMP SCREWDRIVER SLOT DBL SEALED 3" OD 1-3/4"W 1-1/4 - 12 THR
      OEM
      IKO International
      OEM #
      CR48VUU
      Condition
      New OEM Original
      Returnable
      No
      Warranty
      Mfr Warranty
      Bearing Style
      Cylindrical OD
      Clamping Diameter (F) Minimum Mm (Inch)
      51.981 (2-3/64)
      Corner Radius ( R ) Mm (Inch)
      2.381 (3/32)
      Country of Origin
      Japan
      Dimension B
      46.4mm (1.83")
      Dimension B2
      63.500mm (2-1/2?
      Dimension B3
      15.875mm (5/8")
      Dimension C1
      1.588mm (1/16")
      Dimension G1
      6.350mm (1/4")
      Dimension G2
      4.762mm (3/16")
      Dynamic Load Rating (N)
      77600
      Needle Construction
      Full Complement
      O.D. Tolerance (Mm)
      +0 / -0.25
      Od (D) Mm/Inch
      76.200 (3)
      Oil Hole
      Stud Head, End, Outside
      Radial Clearance
      0.010 to 0.040
      Series
      CR
      Static Load Rating (N)
      172000
      Stud Diameter (D1) Mm (Inch)
      31.750 (1-1/4)
      Temperature Range F
      -20°-120°F
      Thread (G) Unf
      1-1/4 - 12
      Tolerance For Mounting Hole (Mm / Inch)
      +0.050 / +0.025 (+.0020 / +.0010)
      Tolerance For Stud Diameter (Mm)
      +0.25 / -0
      Torque Max (Nm)
      500
      Track Capacity (N)
      64300
      Type
      Double sealed
      Width (C) Mm/Inch
      44.450 (1-3/4)
      Width (C) Tolerance (Mm)
      +0 / -0.130

      IKO Cam Follower-INCH, Full Complement, Screwdriver Slot, Double sealed, 3" OD, 1-3/4" Width, 1-1/4 - 12 Thread

      IKO Cam Followers consist of needle rollers, stud acting inner ring raceway and thick-walled outer ring to withstand heavy rolling or shock loads. Cam Followers are available with cylindrical or crowned outer rings. The crowned outer ring alleviates uneven loads resulting from deflection, bending or misalignment in mounting. There are two internal designs available; one with a cage for high speed, and another with a full complement for heavy loads. Cam Followers are follower bearings for cam mechanisms or linear motions, and widely used for machine tools, industrial robots, electronic devices and office automation equipment utilizing their high rigidity and accuracy. These cam followers are provided with pre-packed grease. Sufficient lubrication is also needed between cam followers and steel track on which cam followers run, to prevent seizure and to reduce friction. An appropriate nut is supplied with the stud.