Repair

MACHINED TYPE NEEDLE ROLLER BEARING INCH, 3-1/4" BORE, 4-1/4" OD

HomeIKO Internationalbr526828
MACHINED TYPE NEEDLE ROLLER BEARING INCH, 3-1/4" BORE, 4-1/4" OD
MACHINED TYPE NEEDLE ROLLER BEARING INCH, 3-1/4" BORE, 4-1/4" OD

MACHINED TYPE NEEDLE ROLLER BEARING INCH, 3-1/4" BORE, 4-1/4" OD

Product Overview

IKO Machined Type Needle Roller Bearing INCH BR526828, 3-1/4" Bore, 4-1/4" OD

IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and righty, and most of them come with and without seals. Prepacked lubricant is not provided except double sealed bearings (suffix UU). Proper lubricant must be applied when they are used. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2µmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

Technical Specs
P/N: BR526828 Key Specs
Item
MACHINED TYPE NEEDLE ROLLER BEARING INCH, 3-1/4" BORE, 4-1/4" OD
OEM
IKO International
OEM #
BR526828
Returnable
No
Warranty
Bore (Fw) Mm/Inch
82.550 (3-1/4")
Dynamic Load Rating (N)
141000
Max Speed / Grease (Rpm)
3000
Od Mm (Inch)
107.950 (4-1/4")
Product Type
BR Needle Roller Bearings
Static Load (N)
259000

IKO Machined Type Needle Roller Bearing INCH BR526828, 3-1/4" Bore, 4-1/4" OD

IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and righty, and most of them come with and without seals. Prepacked lubricant is not provided except double sealed bearings (suffix UU). Proper lubricant must be applied when they are used. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2µmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

    Product Overview

    IKO Machined Type Needle Roller Bearing INCH BR526828, 3-1/4" Bore, 4-1/4" OD

    IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and righty, and most of them come with and without seals. Prepacked lubricant is not provided except double sealed bearings (suffix UU). Proper lubricant must be applied when they are used. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2µmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

    Technical Specs
    P/N: BR526828 Key Specs
    Item
    MACHINED TYPE NEEDLE ROLLER BEARING INCH, 3-1/4" BORE, 4-1/4" OD
    OEM
    IKO International
    OEM #
    BR526828
    Returnable
    No
    Warranty
    Bore (Fw) Mm/Inch
    82.550 (3-1/4")
    Dynamic Load Rating (N)
    141000
    Max Speed / Grease (Rpm)
    3000
    Od Mm (Inch)
    107.950 (4-1/4")
    Product Type
    BR Needle Roller Bearings
    Static Load (N)
    259000

    IKO Machined Type Needle Roller Bearing INCH BR526828, 3-1/4" Bore, 4-1/4" OD

    IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and righty, and most of them come with and without seals. Prepacked lubricant is not provided except double sealed bearings (suffix UU). Proper lubricant must be applied when they are used. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2µmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

      Product Overview

      IKO Machined Type Needle Roller Bearing INCH BR526828, 3-1/4" Bore, 4-1/4" OD

      IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and righty, and most of them come with and without seals. Prepacked lubricant is not provided except double sealed bearings (suffix UU). Proper lubricant must be applied when they are used. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2µmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

      Technical Specs
      P/N: BR526828 Key Specs
      Item
      MACHINED TYPE NEEDLE ROLLER BEARING INCH, 3-1/4" BORE, 4-1/4" OD
      OEM
      IKO International
      OEM #
      BR526828
      Returnable
      No
      Warranty
      Bore (Fw) Mm/Inch
      82.550 (3-1/4")
      Dynamic Load Rating (N)
      141000
      Max Speed / Grease (Rpm)
      3000
      Od Mm (Inch)
      107.950 (4-1/4")
      Product Type
      BR Needle Roller Bearings
      Static Load (N)
      259000

      IKO Machined Type Needle Roller Bearing INCH BR526828, 3-1/4" Bore, 4-1/4" OD

      IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and righty, and most of them come with and without seals. Prepacked lubricant is not provided except double sealed bearings (suffix UU). Proper lubricant must be applied when they are used. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2µmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.