OEM#: BHA108ZOHNew OEM Original Outright

SHELL TYPE NEEDLE ROLLER BEARING INCH, HEAVY DUTY, 5/8 BORE, 7/8 OD, .500" WIDTH by IKO International

Your price:
$5.71 eachEstimated to ship by 12/02 if ordered before 10:30 AM EST
HomeIKO Internationalbha108zoh
SHELL TYPE NEEDLE ROLLER BEARING INCH, HEAVY DUTY, 5/8 BORE, 7/8 OD, .500" WIDTH by IKO International
SHELL TYPE NEEDLE ROLLER BEARING INCH, HEAVY DUTY, 5/8 BORE, 7/8 OD, .500" WIDTH by IKO International

OEM#: BHA108ZOH
SHELL TYPE NEEDLE ROLLER BEARING INCH, HEAVY DUTY, 5/8 BORE, 7/8 OD, .500" WIDTH by IKO International

New OEM Original Outright
Your price:
$5.71 each
Estimated to ship by 12/02 if ordered before 10:30 AM EST
Asset Information

Must purchase minimum of 10

ADD TO LIST
Product Overview

IKO Shell Type Needle Roller Bearing INCH, Heavy Duty, 5/8 Bore, 7/8 OD, .500" Width, Part# BHA108ZOH

IKO Shell Type Needle Roller Bearing (often called Drawn Cup) consists of outer ring that is made from accurately drawn thin special steel plate, needle rollers and with or without retainer. The Shell Type Needle Roller Bearings have smallest sectional height and weight among all of needle roller bearings, and have relatively high load ratings. Needle roller bearing with retainer can be used for high-speed applications as the retainer and the thrust ring precisely guide the rollers. Shell Type Needle Roller Bearings are not provided with pre-packed lubricant. Proper lubrication must be applied when these bearings are used. Shell Type needle roller bearings are generally used with shafts without inner rings. 0.2?mRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

Accuracy: The outer ring of Shell Type Needle Roller Bearings cannot avoid deformation by heat treatment due to their thin cross sections. It is not appropriate to take a direct measurement on the outer ring. Use Standard Mounting Dimensions shown for shaft and housing diameters. Tolerance of outer ring Width is +0 to -0.20 mm.

Technical Specs
P/N: BHA108ZOH Key Specs
Item
SHELL TYPE NEEDLE ROLLER BEARING INCH, HEAVY DUTY, 5/8 BORE, 7/8 OD, .500" WIDTH
OEM
IKO International
OEM #
BHA108ZOH
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Appropriate Inner Ring
IRB68-1
Bore (Fw) Mm/Inch
15.875 (5/8)
Country of Origin
Japan
Dynamic Load Rating (N)
6680
Housing Max (Mm)
22.237
Housing Min (Mm)
22.216
Max Speed / Grease (Rpm)
15000
Max Speed / Oil (Rpm)
25000
Od (D) Mm/Inch
22.225 (7/8)
Oil Hole
Yes
Shaft Max (Mm)
15.875
Shaft Min (Mm)
15.864
Static Load Rating (N)
8020
Width (C) Mm/Inch
12.70 ( .500)

IKO Shell Type Needle Roller Bearing INCH, Heavy Duty, 5/8 Bore, 7/8 OD, .500" Width, Part# BHA108ZOH

IKO Shell Type Needle Roller Bearing (often called Drawn Cup) consists of outer ring that is made from accurately drawn thin special steel plate, needle rollers and with or without retainer. The Shell Type Needle Roller Bearings have smallest sectional height and weight among all of needle roller bearings, and have relatively high load ratings. Needle roller bearing with retainer can be used for high-speed applications as the retainer and the thrust ring precisely guide the rollers. Shell Type Needle Roller Bearings are not provided with pre-packed lubricant. Proper lubrication must be applied when these bearings are used. Shell Type needle roller bearings are generally used with shafts without inner rings. 0.2?mRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

Accuracy: The outer ring of Shell Type Needle Roller Bearings cannot avoid deformation by heat treatment due to their thin cross sections. It is not appropriate to take a direct measurement on the outer ring. Use Standard Mounting Dimensions shown for shaft and housing diameters. Tolerance of outer ring Width is +0 to -0.20 mm.

    Product Overview

    IKO Shell Type Needle Roller Bearing INCH, Heavy Duty, 5/8 Bore, 7/8 OD, .500" Width, Part# BHA108ZOH

    IKO Shell Type Needle Roller Bearing (often called Drawn Cup) consists of outer ring that is made from accurately drawn thin special steel plate, needle rollers and with or without retainer. The Shell Type Needle Roller Bearings have smallest sectional height and weight among all of needle roller bearings, and have relatively high load ratings. Needle roller bearing with retainer can be used for high-speed applications as the retainer and the thrust ring precisely guide the rollers. Shell Type Needle Roller Bearings are not provided with pre-packed lubricant. Proper lubrication must be applied when these bearings are used. Shell Type needle roller bearings are generally used with shafts without inner rings. 0.2?mRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

    Accuracy: The outer ring of Shell Type Needle Roller Bearings cannot avoid deformation by heat treatment due to their thin cross sections. It is not appropriate to take a direct measurement on the outer ring. Use Standard Mounting Dimensions shown for shaft and housing diameters. Tolerance of outer ring Width is +0 to -0.20 mm.

    Technical Specs
    P/N: BHA108ZOH Key Specs
    Item
    SHELL TYPE NEEDLE ROLLER BEARING INCH, HEAVY DUTY, 5/8 BORE, 7/8 OD, .500" WIDTH
    OEM
    IKO International
    OEM #
    BHA108ZOH
    Condition
    New OEM Original
    Returnable
    No
    Warranty
    Mfr Warranty
    Appropriate Inner Ring
    IRB68-1
    Bore (Fw) Mm/Inch
    15.875 (5/8)
    Country of Origin
    Japan
    Dynamic Load Rating (N)
    6680
    Housing Max (Mm)
    22.237
    Housing Min (Mm)
    22.216
    Max Speed / Grease (Rpm)
    15000
    Max Speed / Oil (Rpm)
    25000
    Od (D) Mm/Inch
    22.225 (7/8)
    Oil Hole
    Yes
    Shaft Max (Mm)
    15.875
    Shaft Min (Mm)
    15.864
    Static Load Rating (N)
    8020
    Width (C) Mm/Inch
    12.70 ( .500)

    IKO Shell Type Needle Roller Bearing INCH, Heavy Duty, 5/8 Bore, 7/8 OD, .500" Width, Part# BHA108ZOH

    IKO Shell Type Needle Roller Bearing (often called Drawn Cup) consists of outer ring that is made from accurately drawn thin special steel plate, needle rollers and with or without retainer. The Shell Type Needle Roller Bearings have smallest sectional height and weight among all of needle roller bearings, and have relatively high load ratings. Needle roller bearing with retainer can be used for high-speed applications as the retainer and the thrust ring precisely guide the rollers. Shell Type Needle Roller Bearings are not provided with pre-packed lubricant. Proper lubrication must be applied when these bearings are used. Shell Type needle roller bearings are generally used with shafts without inner rings. 0.2?mRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

    Accuracy: The outer ring of Shell Type Needle Roller Bearings cannot avoid deformation by heat treatment due to their thin cross sections. It is not appropriate to take a direct measurement on the outer ring. Use Standard Mounting Dimensions shown for shaft and housing diameters. Tolerance of outer ring Width is +0 to -0.20 mm.

      Product Overview

      IKO Shell Type Needle Roller Bearing INCH, Heavy Duty, 5/8 Bore, 7/8 OD, .500" Width, Part# BHA108ZOH

      IKO Shell Type Needle Roller Bearing (often called Drawn Cup) consists of outer ring that is made from accurately drawn thin special steel plate, needle rollers and with or without retainer. The Shell Type Needle Roller Bearings have smallest sectional height and weight among all of needle roller bearings, and have relatively high load ratings. Needle roller bearing with retainer can be used for high-speed applications as the retainer and the thrust ring precisely guide the rollers. Shell Type Needle Roller Bearings are not provided with pre-packed lubricant. Proper lubrication must be applied when these bearings are used. Shell Type needle roller bearings are generally used with shafts without inner rings. 0.2?mRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

      Accuracy: The outer ring of Shell Type Needle Roller Bearings cannot avoid deformation by heat treatment due to their thin cross sections. It is not appropriate to take a direct measurement on the outer ring. Use Standard Mounting Dimensions shown for shaft and housing diameters. Tolerance of outer ring Width is +0 to -0.20 mm.

      Technical Specs
      P/N: BHA108ZOH Key Specs
      Item
      SHELL TYPE NEEDLE ROLLER BEARING INCH, HEAVY DUTY, 5/8 BORE, 7/8 OD, .500" WIDTH
      OEM
      IKO International
      OEM #
      BHA108ZOH
      Condition
      New OEM Original
      Returnable
      No
      Warranty
      Mfr Warranty
      Appropriate Inner Ring
      IRB68-1
      Bore (Fw) Mm/Inch
      15.875 (5/8)
      Country of Origin
      Japan
      Dynamic Load Rating (N)
      6680
      Housing Max (Mm)
      22.237
      Housing Min (Mm)
      22.216
      Max Speed / Grease (Rpm)
      15000
      Max Speed / Oil (Rpm)
      25000
      Od (D) Mm/Inch
      22.225 (7/8)
      Oil Hole
      Yes
      Shaft Max (Mm)
      15.875
      Shaft Min (Mm)
      15.864
      Static Load Rating (N)
      8020
      Width (C) Mm/Inch
      12.70 ( .500)

      IKO Shell Type Needle Roller Bearing INCH, Heavy Duty, 5/8 Bore, 7/8 OD, .500" Width, Part# BHA108ZOH

      IKO Shell Type Needle Roller Bearing (often called Drawn Cup) consists of outer ring that is made from accurately drawn thin special steel plate, needle rollers and with or without retainer. The Shell Type Needle Roller Bearings have smallest sectional height and weight among all of needle roller bearings, and have relatively high load ratings. Needle roller bearing with retainer can be used for high-speed applications as the retainer and the thrust ring precisely guide the rollers. Shell Type Needle Roller Bearings are not provided with pre-packed lubricant. Proper lubrication must be applied when these bearings are used. Shell Type needle roller bearings are generally used with shafts without inner rings. 0.2?mRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

      Accuracy: The outer ring of Shell Type Needle Roller Bearings cannot avoid deformation by heat treatment due to their thin cross sections. It is not appropriate to take a direct measurement on the outer ring. Use Standard Mounting Dimensions shown for shaft and housing diameters. Tolerance of outer ring Width is +0 to -0.20 mm.