Repair

SHELL TYPE NEEDLE ROLLER BEARING METRIC, HEAVY DUTY, 29MM BORE, 38MM OD, 30MM WIDTH

HomeIKO Internationalta2930z
SHELL TYPE NEEDLE ROLLER BEARING METRIC, HEAVY DUTY, 29MM BORE, 38MM OD, 30MM WIDTH
SHELL TYPE NEEDLE ROLLER BEARING METRIC, HEAVY DUTY, 29MM BORE, 38MM OD, 30MM WIDTH

SHELL TYPE NEEDLE ROLLER BEARING METRIC, HEAVY DUTY, 29MM BORE, 38MM OD, 30MM WIDTH

Product Overview

IKO Shell Type Needle Roller Bearing METRIC, Heavy Duty, 29mm Bore, 38mm OD, 30mm Width, Part# TA2930Z

IKO Shell Type Needle Roller Bearing (often called Drawn Cup) consists of outer ring that is made from accurately drawn thin special steel plate, needle rollers and with or without retainer. The Shell Type Needle Roller Bearings have smallest sectional height and weight among all of needle roller bearings, and have relatively high load ratings. Needle roller bearing with retainer can be used for high-speed applications as the retainer and the thrust ring precisely guide the rollers. Shell Type Needle Roller Bearings are not provided with pre-packed lubricant. Proper lubrication must be applied when these bearings are used. Shell Type needle roller bearings are generally used with shafts without inner rings. 0.2?mRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

Accuracy: The outer ring of Shell Type Needle Roller Bearings cannot avoid deformation by heat treatment due to their thin cross sections. It is not appropriate to take a direct measurement on the outer ring. Use Standard Mounting Dimensions shown for shaft and housing diameters. Tolerance of outer ring Width is +0 to -0.20 mm.

Technical Specs
P/N: TA2930Z Key Specs
Item
SHELL TYPE NEEDLE ROLLER BEARING METRIC, HEAVY DUTY, 29MM BORE, 38MM OD, 30MM WIDTH
OEM
IKO International
OEM #
TA2930Z
Returnable
No
Warranty
Dynamic Load Rating (N)
34200
Housing Max (Mm)
38.014
Housing Min (Mm)
37.989
Max Speed / Grease (Rpm)
7800
Max Speed / Oil (Rpm)
13000
Product Type
Shell Type- METRIC, Heavy Duty
Shaft Max (Mm)
29
Shaft Min (Mm)
28.987
Static Load Rating (N)
60300

IKO Shell Type Needle Roller Bearing METRIC, Heavy Duty, 29mm Bore, 38mm OD, 30mm Width, Part# TA2930Z

IKO Shell Type Needle Roller Bearing (often called Drawn Cup) consists of outer ring that is made from accurately drawn thin special steel plate, needle rollers and with or without retainer. The Shell Type Needle Roller Bearings have smallest sectional height and weight among all of needle roller bearings, and have relatively high load ratings. Needle roller bearing with retainer can be used for high-speed applications as the retainer and the thrust ring precisely guide the rollers. Shell Type Needle Roller Bearings are not provided with pre-packed lubricant. Proper lubrication must be applied when these bearings are used. Shell Type needle roller bearings are generally used with shafts without inner rings. 0.2?mRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

Accuracy: The outer ring of Shell Type Needle Roller Bearings cannot avoid deformation by heat treatment due to their thin cross sections. It is not appropriate to take a direct measurement on the outer ring. Use Standard Mounting Dimensions shown for shaft and housing diameters. Tolerance of outer ring Width is +0 to -0.20 mm.

    Product Overview

    IKO Shell Type Needle Roller Bearing METRIC, Heavy Duty, 29mm Bore, 38mm OD, 30mm Width, Part# TA2930Z

    IKO Shell Type Needle Roller Bearing (often called Drawn Cup) consists of outer ring that is made from accurately drawn thin special steel plate, needle rollers and with or without retainer. The Shell Type Needle Roller Bearings have smallest sectional height and weight among all of needle roller bearings, and have relatively high load ratings. Needle roller bearing with retainer can be used for high-speed applications as the retainer and the thrust ring precisely guide the rollers. Shell Type Needle Roller Bearings are not provided with pre-packed lubricant. Proper lubrication must be applied when these bearings are used. Shell Type needle roller bearings are generally used with shafts without inner rings. 0.2?mRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

    Accuracy: The outer ring of Shell Type Needle Roller Bearings cannot avoid deformation by heat treatment due to their thin cross sections. It is not appropriate to take a direct measurement on the outer ring. Use Standard Mounting Dimensions shown for shaft and housing diameters. Tolerance of outer ring Width is +0 to -0.20 mm.

    Technical Specs
    P/N: TA2930Z Key Specs
    Item
    SHELL TYPE NEEDLE ROLLER BEARING METRIC, HEAVY DUTY, 29MM BORE, 38MM OD, 30MM WIDTH
    OEM
    IKO International
    OEM #
    TA2930Z
    Returnable
    No
    Warranty
    Dynamic Load Rating (N)
    34200
    Housing Max (Mm)
    38.014
    Housing Min (Mm)
    37.989
    Max Speed / Grease (Rpm)
    7800
    Max Speed / Oil (Rpm)
    13000
    Product Type
    Shell Type- METRIC, Heavy Duty
    Shaft Max (Mm)
    29
    Shaft Min (Mm)
    28.987
    Static Load Rating (N)
    60300

    IKO Shell Type Needle Roller Bearing METRIC, Heavy Duty, 29mm Bore, 38mm OD, 30mm Width, Part# TA2930Z

    IKO Shell Type Needle Roller Bearing (often called Drawn Cup) consists of outer ring that is made from accurately drawn thin special steel plate, needle rollers and with or without retainer. The Shell Type Needle Roller Bearings have smallest sectional height and weight among all of needle roller bearings, and have relatively high load ratings. Needle roller bearing with retainer can be used for high-speed applications as the retainer and the thrust ring precisely guide the rollers. Shell Type Needle Roller Bearings are not provided with pre-packed lubricant. Proper lubrication must be applied when these bearings are used. Shell Type needle roller bearings are generally used with shafts without inner rings. 0.2?mRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

    Accuracy: The outer ring of Shell Type Needle Roller Bearings cannot avoid deformation by heat treatment due to their thin cross sections. It is not appropriate to take a direct measurement on the outer ring. Use Standard Mounting Dimensions shown for shaft and housing diameters. Tolerance of outer ring Width is +0 to -0.20 mm.

      Product Overview

      IKO Shell Type Needle Roller Bearing METRIC, Heavy Duty, 29mm Bore, 38mm OD, 30mm Width, Part# TA2930Z

      IKO Shell Type Needle Roller Bearing (often called Drawn Cup) consists of outer ring that is made from accurately drawn thin special steel plate, needle rollers and with or without retainer. The Shell Type Needle Roller Bearings have smallest sectional height and weight among all of needle roller bearings, and have relatively high load ratings. Needle roller bearing with retainer can be used for high-speed applications as the retainer and the thrust ring precisely guide the rollers. Shell Type Needle Roller Bearings are not provided with pre-packed lubricant. Proper lubrication must be applied when these bearings are used. Shell Type needle roller bearings are generally used with shafts without inner rings. 0.2?mRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

      Accuracy: The outer ring of Shell Type Needle Roller Bearings cannot avoid deformation by heat treatment due to their thin cross sections. It is not appropriate to take a direct measurement on the outer ring. Use Standard Mounting Dimensions shown for shaft and housing diameters. Tolerance of outer ring Width is +0 to -0.20 mm.

      Technical Specs
      P/N: TA2930Z Key Specs
      Item
      SHELL TYPE NEEDLE ROLLER BEARING METRIC, HEAVY DUTY, 29MM BORE, 38MM OD, 30MM WIDTH
      OEM
      IKO International
      OEM #
      TA2930Z
      Returnable
      No
      Warranty
      Dynamic Load Rating (N)
      34200
      Housing Max (Mm)
      38.014
      Housing Min (Mm)
      37.989
      Max Speed / Grease (Rpm)
      7800
      Max Speed / Oil (Rpm)
      13000
      Product Type
      Shell Type- METRIC, Heavy Duty
      Shaft Max (Mm)
      29
      Shaft Min (Mm)
      28.987
      Static Load Rating (N)
      60300

      IKO Shell Type Needle Roller Bearing METRIC, Heavy Duty, 29mm Bore, 38mm OD, 30mm Width, Part# TA2930Z

      IKO Shell Type Needle Roller Bearing (often called Drawn Cup) consists of outer ring that is made from accurately drawn thin special steel plate, needle rollers and with or without retainer. The Shell Type Needle Roller Bearings have smallest sectional height and weight among all of needle roller bearings, and have relatively high load ratings. Needle roller bearing with retainer can be used for high-speed applications as the retainer and the thrust ring precisely guide the rollers. Shell Type Needle Roller Bearings are not provided with pre-packed lubricant. Proper lubrication must be applied when these bearings are used. Shell Type needle roller bearings are generally used with shafts without inner rings. 0.2?mRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

      Accuracy: The outer ring of Shell Type Needle Roller Bearings cannot avoid deformation by heat treatment due to their thin cross sections. It is not appropriate to take a direct measurement on the outer ring. Use Standard Mounting Dimensions shown for shaft and housing diameters. Tolerance of outer ring Width is +0 to -0.20 mm.