Repair

DOUBLE ROW MACHINED TYPE NEEDLE ROLLER BEARING METRIC DOUBLE SEALED, 72MM BORE, 90MM OD

HomeIKO Internationalrna6913uu
DOUBLE ROW MACHINED TYPE NEEDLE ROLLER BEARING METRIC DOUBLE SEALED, 72MM BORE, 90MM OD
DOUBLE ROW MACHINED TYPE NEEDLE ROLLER BEARING METRIC DOUBLE SEALED, 72MM BORE, 90MM OD

DOUBLE ROW MACHINED TYPE NEEDLE ROLLER BEARING METRIC DOUBLE SEALED, 72MM BORE, 90MM OD

Product Overview

IKO Double Row Machined Type Needle Roller Bearing METRIC Double Sealed, 72mm Bore, 90mm OD

IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and rigidity, and most of them come with seals. Prepacked lubricant is not provided except double sealed bearings (suffix UU). Proper lubricant must be applied when they are used. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2µmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

Technical Specs
P/N: RNA6913UU Key Specs
Item
DOUBLE ROW MACHINED TYPE NEEDLE ROLLER BEARING METRIC DOUBLE SEALED, 72MM BORE, 90MM OD
OEM
IKO International
OEM #
RNA6913UU
Returnable
No
Warranty
Bore (Fw) Mm/Inch
72
Dynamic Load Rating (N)
97400
Max Speed / Grease (Rpm)
2500
Od Mm (Inch)
90
Product Type
Machined Bearings RNA
Series
RNA69
Static Load (N)
200000
Width (Mm)
45

IKO Double Row Machined Type Needle Roller Bearing METRIC Double Sealed, 72mm Bore, 90mm OD

IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and rigidity, and most of them come with seals. Prepacked lubricant is not provided except double sealed bearings (suffix UU). Proper lubricant must be applied when they are used. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2µmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

    Product Overview

    IKO Double Row Machined Type Needle Roller Bearing METRIC Double Sealed, 72mm Bore, 90mm OD

    IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and rigidity, and most of them come with seals. Prepacked lubricant is not provided except double sealed bearings (suffix UU). Proper lubricant must be applied when they are used. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2µmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

    Technical Specs
    P/N: RNA6913UU Key Specs
    Item
    DOUBLE ROW MACHINED TYPE NEEDLE ROLLER BEARING METRIC DOUBLE SEALED, 72MM BORE, 90MM OD
    OEM
    IKO International
    OEM #
    RNA6913UU
    Returnable
    No
    Warranty
    Bore (Fw) Mm/Inch
    72
    Dynamic Load Rating (N)
    97400
    Max Speed / Grease (Rpm)
    2500
    Od Mm (Inch)
    90
    Product Type
    Machined Bearings RNA
    Series
    RNA69
    Static Load (N)
    200000
    Width (Mm)
    45

    IKO Double Row Machined Type Needle Roller Bearing METRIC Double Sealed, 72mm Bore, 90mm OD

    IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and rigidity, and most of them come with seals. Prepacked lubricant is not provided except double sealed bearings (suffix UU). Proper lubricant must be applied when they are used. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2µmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

      Product Overview

      IKO Double Row Machined Type Needle Roller Bearing METRIC Double Sealed, 72mm Bore, 90mm OD

      IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and rigidity, and most of them come with seals. Prepacked lubricant is not provided except double sealed bearings (suffix UU). Proper lubricant must be applied when they are used. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2µmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.

      Technical Specs
      P/N: RNA6913UU Key Specs
      Item
      DOUBLE ROW MACHINED TYPE NEEDLE ROLLER BEARING METRIC DOUBLE SEALED, 72MM BORE, 90MM OD
      OEM
      IKO International
      OEM #
      RNA6913UU
      Returnable
      No
      Warranty
      Bore (Fw) Mm/Inch
      72
      Dynamic Load Rating (N)
      97400
      Max Speed / Grease (Rpm)
      2500
      Od Mm (Inch)
      90
      Product Type
      Machined Bearings RNA
      Series
      RNA69
      Static Load (N)
      200000
      Width (Mm)
      45

      IKO Double Row Machined Type Needle Roller Bearing METRIC Double Sealed, 72mm Bore, 90mm OD

      IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and rigidity, and most of them come with seals. Prepacked lubricant is not provided except double sealed bearings (suffix UU). Proper lubricant must be applied when they are used. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2µmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended.