OEM#: CRY64VUUNew OEM Original Outright

ROLLER FOLLOWER- FULL COMP- INCH, DOUBLE SEALED, 4" OD by IKO International

Your price:
$200.07 eachEstimated to ship by 12/26 if ordered before 10:30 AM EST
HomeIKO Internationalcry64vuu
ROLLER FOLLOWER- FULL COMP- INCH, DOUBLE SEALED, 4" OD by IKO International
ROLLER FOLLOWER- FULL COMP- INCH, DOUBLE SEALED, 4" OD by IKO International

OEM#: CRY64VUU
ROLLER FOLLOWER- FULL COMP- INCH, DOUBLE SEALED, 4" OD by IKO International

New OEM Original Outright
Your price:
$200.07 each
Estimated to ship by 12/26 if ordered before 10:30 AM EST
Asset Information
ADD TO LIST
Product Overview

IKO Roller Follower- Full Comp- Inch, CRY64VUU, Double Sealed, 4" OD

IKO Non-separable Yoke Type Roller Follower is full complement bearing with inner ring, side plates and thick-walled outer ring to withstand heavy rolling or shock loads. Its surface is treated with black oxide coating. Roller Followers are available with Crowned or Cylindrical outer rings. The crowned outer ring relieves edge load created by mounting error and the cylindrical is suitable for applications with large loads or low track surface hardness due to a large contact area with mating track surface. Sufficient lubrication is needed between roller followers and steel track on which cam followers run, to prevent seizure and to reduce friction.

Technical Specs
P/N: CRY64VUU Key Specs
Item
ROLLER FOLLOWER- FULL COMP- INCH, DOUBLE SEALED, 4" OD
OEM
IKO International
OEM #
CRY64VUU
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Bearing Style
Cylindrical OD
Bore Diameter Millimeters (Inch)
31.750 (1-1/4)
Bore Tolerance (Mm)
+0.005 / -0.010
Country of Origin
Japan
Dynamic Load Rating (N)
142000
Needle Construction
Full Compliment
O.D. Tolerance (Mm)
+0 / -0.025
Od Mm (Inch)
101.600 (4)
Oil Hole & Groove
At inner ring
Outer Ring Corner Radius Min. Mm (Inch)
2.381 (3/32)
Outer Ring Width Mm (Inch)
57.150 (2-1/4)
Overall Width Mm (Inch)
58.738 (2.3125)
Prepacked Grease
YES
Radial Clearance
0.045 to 0.070
Retainer
None
Series
CRY
Shaft Dia Drive Fit (Mm)
31.747 to 31.760
Shaft Dia Press Fit (Mm)
31.758 to 31.770
Shaft Dia Push Fit (Mm)
31.727 to 31.740
Side Plate Od (A) Mm (Inch)
71.0 (2.797)
Static Load Rating (N)
317000
Tolerance Outer Ring Width (Mm)
+0 / -0.130
Tolerance Overall Width (Mm)
+0.130 / -0.250
Track Capacity (N)
113000
Type
Double Sealed

IKO Roller Follower- Full Comp- Inch, CRY64VUU, Double Sealed, 4" OD

IKO Non-separable Yoke Type Roller Follower is full complement bearing with inner ring, side plates and thick-walled outer ring to withstand heavy rolling or shock loads. Its surface is treated with black oxide coating. Roller Followers are available with Crowned or Cylindrical outer rings. The crowned outer ring relieves edge load created by mounting error and the cylindrical is suitable for applications with large loads or low track surface hardness due to a large contact area with mating track surface. Sufficient lubrication is needed between roller followers and steel track on which cam followers run, to prevent seizure and to reduce friction.

    Product Overview

    IKO Roller Follower- Full Comp- Inch, CRY64VUU, Double Sealed, 4" OD

    IKO Non-separable Yoke Type Roller Follower is full complement bearing with inner ring, side plates and thick-walled outer ring to withstand heavy rolling or shock loads. Its surface is treated with black oxide coating. Roller Followers are available with Crowned or Cylindrical outer rings. The crowned outer ring relieves edge load created by mounting error and the cylindrical is suitable for applications with large loads or low track surface hardness due to a large contact area with mating track surface. Sufficient lubrication is needed between roller followers and steel track on which cam followers run, to prevent seizure and to reduce friction.

    Technical Specs
    P/N: CRY64VUU Key Specs
    Item
    ROLLER FOLLOWER- FULL COMP- INCH, DOUBLE SEALED, 4" OD
    OEM
    IKO International
    OEM #
    CRY64VUU
    Condition
    New OEM Original
    Returnable
    No
    Warranty
    Mfr Warranty
    Bearing Style
    Cylindrical OD
    Bore Diameter Millimeters (Inch)
    31.750 (1-1/4)
    Bore Tolerance (Mm)
    +0.005 / -0.010
    Country of Origin
    Japan
    Dynamic Load Rating (N)
    142000
    Needle Construction
    Full Compliment
    O.D. Tolerance (Mm)
    +0 / -0.025
    Od Mm (Inch)
    101.600 (4)
    Oil Hole & Groove
    At inner ring
    Outer Ring Corner Radius Min. Mm (Inch)
    2.381 (3/32)
    Outer Ring Width Mm (Inch)
    57.150 (2-1/4)
    Overall Width Mm (Inch)
    58.738 (2.3125)
    Prepacked Grease
    YES
    Radial Clearance
    0.045 to 0.070
    Retainer
    None
    Series
    CRY
    Shaft Dia Drive Fit (Mm)
    31.747 to 31.760
    Shaft Dia Press Fit (Mm)
    31.758 to 31.770
    Shaft Dia Push Fit (Mm)
    31.727 to 31.740
    Side Plate Od (A) Mm (Inch)
    71.0 (2.797)
    Static Load Rating (N)
    317000
    Tolerance Outer Ring Width (Mm)
    +0 / -0.130
    Tolerance Overall Width (Mm)
    +0.130 / -0.250
    Track Capacity (N)
    113000
    Type
    Double Sealed

    IKO Roller Follower- Full Comp- Inch, CRY64VUU, Double Sealed, 4" OD

    IKO Non-separable Yoke Type Roller Follower is full complement bearing with inner ring, side plates and thick-walled outer ring to withstand heavy rolling or shock loads. Its surface is treated with black oxide coating. Roller Followers are available with Crowned or Cylindrical outer rings. The crowned outer ring relieves edge load created by mounting error and the cylindrical is suitable for applications with large loads or low track surface hardness due to a large contact area with mating track surface. Sufficient lubrication is needed between roller followers and steel track on which cam followers run, to prevent seizure and to reduce friction.

      Product Overview

      IKO Roller Follower- Full Comp- Inch, CRY64VUU, Double Sealed, 4" OD

      IKO Non-separable Yoke Type Roller Follower is full complement bearing with inner ring, side plates and thick-walled outer ring to withstand heavy rolling or shock loads. Its surface is treated with black oxide coating. Roller Followers are available with Crowned or Cylindrical outer rings. The crowned outer ring relieves edge load created by mounting error and the cylindrical is suitable for applications with large loads or low track surface hardness due to a large contact area with mating track surface. Sufficient lubrication is needed between roller followers and steel track on which cam followers run, to prevent seizure and to reduce friction.

      Technical Specs
      P/N: CRY64VUU Key Specs
      Item
      ROLLER FOLLOWER- FULL COMP- INCH, DOUBLE SEALED, 4" OD
      OEM
      IKO International
      OEM #
      CRY64VUU
      Condition
      New OEM Original
      Returnable
      No
      Warranty
      Mfr Warranty
      Bearing Style
      Cylindrical OD
      Bore Diameter Millimeters (Inch)
      31.750 (1-1/4)
      Bore Tolerance (Mm)
      +0.005 / -0.010
      Country of Origin
      Japan
      Dynamic Load Rating (N)
      142000
      Needle Construction
      Full Compliment
      O.D. Tolerance (Mm)
      +0 / -0.025
      Od Mm (Inch)
      101.600 (4)
      Oil Hole & Groove
      At inner ring
      Outer Ring Corner Radius Min. Mm (Inch)
      2.381 (3/32)
      Outer Ring Width Mm (Inch)
      57.150 (2-1/4)
      Overall Width Mm (Inch)
      58.738 (2.3125)
      Prepacked Grease
      YES
      Radial Clearance
      0.045 to 0.070
      Retainer
      None
      Series
      CRY
      Shaft Dia Drive Fit (Mm)
      31.747 to 31.760
      Shaft Dia Press Fit (Mm)
      31.758 to 31.770
      Shaft Dia Push Fit (Mm)
      31.727 to 31.740
      Side Plate Od (A) Mm (Inch)
      71.0 (2.797)
      Static Load Rating (N)
      317000
      Tolerance Outer Ring Width (Mm)
      +0 / -0.130
      Tolerance Overall Width (Mm)
      +0.130 / -0.250
      Track Capacity (N)
      113000
      Type
      Double Sealed

      IKO Roller Follower- Full Comp- Inch, CRY64VUU, Double Sealed, 4" OD

      IKO Non-separable Yoke Type Roller Follower is full complement bearing with inner ring, side plates and thick-walled outer ring to withstand heavy rolling or shock loads. Its surface is treated with black oxide coating. Roller Followers are available with Crowned or Cylindrical outer rings. The crowned outer ring relieves edge load created by mounting error and the cylindrical is suitable for applications with large loads or low track surface hardness due to a large contact area with mating track surface. Sufficient lubrication is needed between roller followers and steel track on which cam followers run, to prevent seizure and to reduce friction.