OEM#: CRH28VBUURNew OEM Original Outright

CAM FOLLOWER-INCH HD FULL COMP CROWNED OD HEX HOLE DBL SEALED 1-3/4" OD 1"W 1-14 UNS THR by IKO International

Your price:
$51.21 eachEstimated to ship by 12/09 if ordered before 10:30 AM EST
HomeIKO Internationalcrh28vbuur
CAM FOLLOWER-INCH HD FULL COMP CROWNED OD HEX HOLE DBL SEALED 1-3/4" OD 1"W 1-14 UNS THR by IKO International
CAM FOLLOWER-INCH HD FULL COMP CROWNED OD HEX HOLE DBL SEALED 1-3/4" OD 1"W 1-14 UNS THR by IKO International

OEM#: CRH28VBUUR
CAM FOLLOWER-INCH HD FULL COMP CROWNED OD HEX HOLE DBL SEALED 1-3/4" OD 1"W 1-14 UNS THR by IKO International

New OEM Original Outright
Your price:
$51.21 each
Estimated to ship by 12/09 if ordered before 10:30 AM EST
Asset Information

Must purchase minimum of 2

ADD TO LIST
Product Overview

IKO Cam Follower-INCH, Heavy Duty, Full Complement, Crowned OD, Hex Hole, Double Sealed, 1-3/4" OD, 1" Width, 1-14 UNS Thread

IKO Cam Followers consist of needle rollers, stud acting inner ring raceway and thick-walled outer ring to withstand heavy rolling or shock loads. Cam Followers are available with cylindrical or crowned outer rings. The crowned outer ring alleviates uneven loads resulting from deflection, bending or misalignment in mounting. There are two internal designs available; one with a cage for high speed, and another with a full complement for heavy loads. Cam Followers are follower bearings for cam mechanisms or linear motions, and widely used for machine tools, industrial robots, electronic devices and office automation equipment utilizing their high rigidity and accuracy. These cam followers are provided with pre-packed grease. Sufficient lubrication is also needed between cam followers and steel track on which cam followers run, to prevent seizure and to reduce friction. An appropriate nut is supplied with the stud.

Technical Specs
P/N: CRH28VBUUR Key Specs
Item
CAM FOLLOWER-INCH HD FULL COMP CROWNED OD HEX HOLE DBL SEALED 1-3/4" OD 1"W 1-14 UNS THR
OEM
IKO International
OEM #
CRH28VBUUR
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Bearing Style
Crowned OD
Clamping Diameter (F) Minimum Mm (Inch)
32.941 (1-19/64)
Country of Origin
Japan
Crown Radius (R) Mm (Inch)
500 (20)
Dimension B
27.4mm (1.08")
Dimension B2
44.450mm (1-3/4")
Dimension B3
11.112mm (7/16")
Dimension C1
1.588mm (1/16")
Dimension G1
4.762mm (3/16")
Dimension G2
2.381mm (3/32")
Dimension H
7.938mm (5/16")
Dynamic Load Rating (N)
35300
Needle Construction
Full Complement
O.D. Tolerance (Mm)
+0 / -0.50
Od (D) Mm/Inch
44.450 (1-3/4)
Oil Hole
Stud End, Stud Outside
Radial Clearance
0.010 to 0.030
Series
CR
Static Load Rating (N)
55600
Stud Diameter (D1) Mm (Inch)
25.400 (1)
Temperature Range F
-20°-120°F
Thread (G) Unf
1-14 UNS
Tolerance For Mounting Hole (Mm / Inch)
+0.041 / +0.020 (+.0016 / +.0008)
Tolerance For Stud Diameter (Mm)
+0.25 / -0
Torque Max (Nm)
258
Track Capacity (N)
4210
Type
Double Sealed
Width (C) Mm/Inch
25.400 (1)
Width (C) Tolerance (Mm)
+0 / -0.130

IKO Cam Follower-INCH, Heavy Duty, Full Complement, Crowned OD, Hex Hole, Double Sealed, 1-3/4" OD, 1" Width, 1-14 UNS Thread

IKO Cam Followers consist of needle rollers, stud acting inner ring raceway and thick-walled outer ring to withstand heavy rolling or shock loads. Cam Followers are available with cylindrical or crowned outer rings. The crowned outer ring alleviates uneven loads resulting from deflection, bending or misalignment in mounting. There are two internal designs available; one with a cage for high speed, and another with a full complement for heavy loads. Cam Followers are follower bearings for cam mechanisms or linear motions, and widely used for machine tools, industrial robots, electronic devices and office automation equipment utilizing their high rigidity and accuracy. These cam followers are provided with pre-packed grease. Sufficient lubrication is also needed between cam followers and steel track on which cam followers run, to prevent seizure and to reduce friction. An appropriate nut is supplied with the stud.

    Product Overview

    IKO Cam Follower-INCH, Heavy Duty, Full Complement, Crowned OD, Hex Hole, Double Sealed, 1-3/4" OD, 1" Width, 1-14 UNS Thread

    IKO Cam Followers consist of needle rollers, stud acting inner ring raceway and thick-walled outer ring to withstand heavy rolling or shock loads. Cam Followers are available with cylindrical or crowned outer rings. The crowned outer ring alleviates uneven loads resulting from deflection, bending or misalignment in mounting. There are two internal designs available; one with a cage for high speed, and another with a full complement for heavy loads. Cam Followers are follower bearings for cam mechanisms or linear motions, and widely used for machine tools, industrial robots, electronic devices and office automation equipment utilizing their high rigidity and accuracy. These cam followers are provided with pre-packed grease. Sufficient lubrication is also needed between cam followers and steel track on which cam followers run, to prevent seizure and to reduce friction. An appropriate nut is supplied with the stud.

    Technical Specs
    P/N: CRH28VBUUR Key Specs
    Item
    CAM FOLLOWER-INCH HD FULL COMP CROWNED OD HEX HOLE DBL SEALED 1-3/4" OD 1"W 1-14 UNS THR
    OEM
    IKO International
    OEM #
    CRH28VBUUR
    Condition
    New OEM Original
    Returnable
    No
    Warranty
    Mfr Warranty
    Bearing Style
    Crowned OD
    Clamping Diameter (F) Minimum Mm (Inch)
    32.941 (1-19/64)
    Country of Origin
    Japan
    Crown Radius (R) Mm (Inch)
    500 (20)
    Dimension B
    27.4mm (1.08")
    Dimension B2
    44.450mm (1-3/4")
    Dimension B3
    11.112mm (7/16")
    Dimension C1
    1.588mm (1/16")
    Dimension G1
    4.762mm (3/16")
    Dimension G2
    2.381mm (3/32")
    Dimension H
    7.938mm (5/16")
    Dynamic Load Rating (N)
    35300
    Needle Construction
    Full Complement
    O.D. Tolerance (Mm)
    +0 / -0.50
    Od (D) Mm/Inch
    44.450 (1-3/4)
    Oil Hole
    Stud End, Stud Outside
    Radial Clearance
    0.010 to 0.030
    Series
    CR
    Static Load Rating (N)
    55600
    Stud Diameter (D1) Mm (Inch)
    25.400 (1)
    Temperature Range F
    -20°-120°F
    Thread (G) Unf
    1-14 UNS
    Tolerance For Mounting Hole (Mm / Inch)
    +0.041 / +0.020 (+.0016 / +.0008)
    Tolerance For Stud Diameter (Mm)
    +0.25 / -0
    Torque Max (Nm)
    258
    Track Capacity (N)
    4210
    Type
    Double Sealed
    Width (C) Mm/Inch
    25.400 (1)
    Width (C) Tolerance (Mm)
    +0 / -0.130

    IKO Cam Follower-INCH, Heavy Duty, Full Complement, Crowned OD, Hex Hole, Double Sealed, 1-3/4" OD, 1" Width, 1-14 UNS Thread

    IKO Cam Followers consist of needle rollers, stud acting inner ring raceway and thick-walled outer ring to withstand heavy rolling or shock loads. Cam Followers are available with cylindrical or crowned outer rings. The crowned outer ring alleviates uneven loads resulting from deflection, bending or misalignment in mounting. There are two internal designs available; one with a cage for high speed, and another with a full complement for heavy loads. Cam Followers are follower bearings for cam mechanisms or linear motions, and widely used for machine tools, industrial robots, electronic devices and office automation equipment utilizing their high rigidity and accuracy. These cam followers are provided with pre-packed grease. Sufficient lubrication is also needed between cam followers and steel track on which cam followers run, to prevent seizure and to reduce friction. An appropriate nut is supplied with the stud.

      Product Overview

      IKO Cam Follower-INCH, Heavy Duty, Full Complement, Crowned OD, Hex Hole, Double Sealed, 1-3/4" OD, 1" Width, 1-14 UNS Thread

      IKO Cam Followers consist of needle rollers, stud acting inner ring raceway and thick-walled outer ring to withstand heavy rolling or shock loads. Cam Followers are available with cylindrical or crowned outer rings. The crowned outer ring alleviates uneven loads resulting from deflection, bending or misalignment in mounting. There are two internal designs available; one with a cage for high speed, and another with a full complement for heavy loads. Cam Followers are follower bearings for cam mechanisms or linear motions, and widely used for machine tools, industrial robots, electronic devices and office automation equipment utilizing their high rigidity and accuracy. These cam followers are provided with pre-packed grease. Sufficient lubrication is also needed between cam followers and steel track on which cam followers run, to prevent seizure and to reduce friction. An appropriate nut is supplied with the stud.

      Technical Specs
      P/N: CRH28VBUUR Key Specs
      Item
      CAM FOLLOWER-INCH HD FULL COMP CROWNED OD HEX HOLE DBL SEALED 1-3/4" OD 1"W 1-14 UNS THR
      OEM
      IKO International
      OEM #
      CRH28VBUUR
      Condition
      New OEM Original
      Returnable
      No
      Warranty
      Mfr Warranty
      Bearing Style
      Crowned OD
      Clamping Diameter (F) Minimum Mm (Inch)
      32.941 (1-19/64)
      Country of Origin
      Japan
      Crown Radius (R) Mm (Inch)
      500 (20)
      Dimension B
      27.4mm (1.08")
      Dimension B2
      44.450mm (1-3/4")
      Dimension B3
      11.112mm (7/16")
      Dimension C1
      1.588mm (1/16")
      Dimension G1
      4.762mm (3/16")
      Dimension G2
      2.381mm (3/32")
      Dimension H
      7.938mm (5/16")
      Dynamic Load Rating (N)
      35300
      Needle Construction
      Full Complement
      O.D. Tolerance (Mm)
      +0 / -0.50
      Od (D) Mm/Inch
      44.450 (1-3/4)
      Oil Hole
      Stud End, Stud Outside
      Radial Clearance
      0.010 to 0.030
      Series
      CR
      Static Load Rating (N)
      55600
      Stud Diameter (D1) Mm (Inch)
      25.400 (1)
      Temperature Range F
      -20°-120°F
      Thread (G) Unf
      1-14 UNS
      Tolerance For Mounting Hole (Mm / Inch)
      +0.041 / +0.020 (+.0016 / +.0008)
      Tolerance For Stud Diameter (Mm)
      +0.25 / -0
      Torque Max (Nm)
      258
      Track Capacity (N)
      4210
      Type
      Double Sealed
      Width (C) Mm/Inch
      25.400 (1)
      Width (C) Tolerance (Mm)
      +0 / -0.130

      IKO Cam Follower-INCH, Heavy Duty, Full Complement, Crowned OD, Hex Hole, Double Sealed, 1-3/4" OD, 1" Width, 1-14 UNS Thread

      IKO Cam Followers consist of needle rollers, stud acting inner ring raceway and thick-walled outer ring to withstand heavy rolling or shock loads. Cam Followers are available with cylindrical or crowned outer rings. The crowned outer ring alleviates uneven loads resulting from deflection, bending or misalignment in mounting. There are two internal designs available; one with a cage for high speed, and another with a full complement for heavy loads. Cam Followers are follower bearings for cam mechanisms or linear motions, and widely used for machine tools, industrial robots, electronic devices and office automation equipment utilizing their high rigidity and accuracy. These cam followers are provided with pre-packed grease. Sufficient lubrication is also needed between cam followers and steel track on which cam followers run, to prevent seizure and to reduce friction. An appropriate nut is supplied with the stud.