Sign InRegister
Departments
Solutions
PRO
Browsing History
Main Menu
Batteries
Biomedical
Cables & Sensors
Computers & Electronics
Facilities & Workspaces
Laboratory
Lighting & Bulbs
Medical Imaging
Minor Equipment
On-Site Service
Repair
Training
Shop by OEM
Shop by Model
Main Menu
Provider
Supplier
Government
Partners
GPOs
Resources
About
Main Menu
About PartsSource PRO
On-Demand Parts
On-Demand Service
Repair & Service Agreements
Main Menu
My Account
Orders
Parts Quotes
Depot Repairs & Quotes
On-Site Service
Submit Work Orders
Exchanges & Returns
Settings
Main Menu
Month over Month Spend
Prior Rebates
Main Menu
My Lists
Create New List
Repair
DRY WELL TEMPERATURE CALIBRATOR
DRY WELL TEMPERATURE CALIBRATOR
Product Overview
The Handheld Dry-Well Temperature Calibrator with Block "A", 35°C to 375°C (95°F to 707°F) may be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. This instrument is small enough to use in the field, and accurate enough to use in the lab. Calibrations may be done over a range of 35°C to 375°C (95°F to 707°F). Temperature display and setability resolution is 0.1 degrees. The temperature is accurately controlled by Fluke's digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a triac driven heater. The Calibration LED front panel continuously shows the current well temperature. The temperature may be set, using the control buttons, to any desired temperature within the instrument's range. Multiple fault protection devices insure user and instrument safety and protection.
- Rapid heating and cooling Prop stand
- RS-232 interface capability
- Temperature scan rate control
- Eight set-point memory
- Adjustable readout in °C or °F
Includes:
- 1 - RS-232 Interface
- 1 - Instrument Control Software
- 1 - NIST-Traceable Calibration
Technical Specs
P/N: 9100SA156 Key Specs
Item
DRY WELL TEMPERATURE CALIBRATOR
OEM
Hart Scientific
OEM #
9100SA156
Returnable
No
Warranty
Accuracy
±0.25°C at 50°C; ±0.25°C at 100°C; ±0.5°C at 375°C
Product Type
Calibrator
The Handheld Dry-Well Temperature Calibrator with Block "A", 35°C to 375°C (95°F to 707°F) may be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. This instrument is small enough to use in the field, and accurate enough to use in the lab. Calibrations may be done over a range of 35°C to 375°C (95°F to 707°F). Temperature display and setability resolution is 0.1 degrees. The temperature is accurately controlled by Fluke's digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a triac driven heater. The Calibration LED front panel continuously shows the current well temperature. The temperature may be set, using the control buttons, to any desired temperature within the instrument's range. Multiple fault protection devices insure user and instrument safety and protection.
- Rapid heating and cooling Prop stand
- RS-232 interface capability
- Temperature scan rate control
- Eight set-point memory
- Adjustable readout in °C or °F
Includes:
- 1 - RS-232 Interface
- 1 - Instrument Control Software
- 1 - NIST-Traceable Calibration
Product Overview
The Handheld Dry-Well Temperature Calibrator with Block "A", 35°C to 375°C (95°F to 707°F) may be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. This instrument is small enough to use in the field, and accurate enough to use in the lab. Calibrations may be done over a range of 35°C to 375°C (95°F to 707°F). Temperature display and setability resolution is 0.1 degrees. The temperature is accurately controlled by Fluke's digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a triac driven heater. The Calibration LED front panel continuously shows the current well temperature. The temperature may be set, using the control buttons, to any desired temperature within the instrument's range. Multiple fault protection devices insure user and instrument safety and protection.
- Rapid heating and cooling Prop stand
- RS-232 interface capability
- Temperature scan rate control
- Eight set-point memory
- Adjustable readout in °C or °F
Includes:
- 1 - RS-232 Interface
- 1 - Instrument Control Software
- 1 - NIST-Traceable Calibration
Technical Specs
P/N: 9100SA156 Key Specs
Item
DRY WELL TEMPERATURE CALIBRATOR
OEM
Hart Scientific
OEM #
9100SA156
Returnable
No
Warranty
Accuracy
±0.25°C at 50°C; ±0.25°C at 100°C; ±0.5°C at 375°C
Product Type
Calibrator
The Handheld Dry-Well Temperature Calibrator with Block "A", 35°C to 375°C (95°F to 707°F) may be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. This instrument is small enough to use in the field, and accurate enough to use in the lab. Calibrations may be done over a range of 35°C to 375°C (95°F to 707°F). Temperature display and setability resolution is 0.1 degrees. The temperature is accurately controlled by Fluke's digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a triac driven heater. The Calibration LED front panel continuously shows the current well temperature. The temperature may be set, using the control buttons, to any desired temperature within the instrument's range. Multiple fault protection devices insure user and instrument safety and protection.
- Rapid heating and cooling Prop stand
- RS-232 interface capability
- Temperature scan rate control
- Eight set-point memory
- Adjustable readout in °C or °F
Includes:
- 1 - RS-232 Interface
- 1 - Instrument Control Software
- 1 - NIST-Traceable Calibration
Product Overview
The Handheld Dry-Well Temperature Calibrator with Block "A", 35°C to 375°C (95°F to 707°F) may be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. This instrument is small enough to use in the field, and accurate enough to use in the lab. Calibrations may be done over a range of 35°C to 375°C (95°F to 707°F). Temperature display and setability resolution is 0.1 degrees. The temperature is accurately controlled by Fluke's digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a triac driven heater. The Calibration LED front panel continuously shows the current well temperature. The temperature may be set, using the control buttons, to any desired temperature within the instrument's range. Multiple fault protection devices insure user and instrument safety and protection.
- Rapid heating and cooling Prop stand
- RS-232 interface capability
- Temperature scan rate control
- Eight set-point memory
- Adjustable readout in °C or °F
Includes:
- 1 - RS-232 Interface
- 1 - Instrument Control Software
- 1 - NIST-Traceable Calibration
Technical Specs
P/N: 9100SA156 Key Specs
Item
DRY WELL TEMPERATURE CALIBRATOR
OEM
Hart Scientific
OEM #
9100SA156
Returnable
No
Warranty
Accuracy
±0.25°C at 50°C; ±0.25°C at 100°C; ±0.5°C at 375°C
Product Type
Calibrator
The Handheld Dry-Well Temperature Calibrator with Block "A", 35°C to 375°C (95°F to 707°F) may be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. This instrument is small enough to use in the field, and accurate enough to use in the lab. Calibrations may be done over a range of 35°C to 375°C (95°F to 707°F). Temperature display and setability resolution is 0.1 degrees. The temperature is accurately controlled by Fluke's digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a triac driven heater. The Calibration LED front panel continuously shows the current well temperature. The temperature may be set, using the control buttons, to any desired temperature within the instrument's range. Multiple fault protection devices insure user and instrument safety and protection.
- Rapid heating and cooling Prop stand
- RS-232 interface capability
- Temperature scan rate control
- Eight set-point memory
- Adjustable readout in °C or °F
Includes:
- 1 - RS-232 Interface
- 1 - Instrument Control Software
- 1 - NIST-Traceable Calibration