Repair

SENDER, STEEL, 100 TO 240 VAC, 50/60 HZ, 32 TO 122 DEG F, 2560 X 1440, 19 IN X 1.5 IN X 5.06 IN

HomeHall Research Inc.u97h2s
SENDER, STEEL, 100 TO 240 VAC, 50/60 HZ, 32 TO 122 DEG F, 2560 X 1440, 19 IN X 1.5 IN X 5.06 IN
SENDER, STEEL, 100 TO 240 VAC, 50/60 HZ, 32 TO 122 DEG F, 2560 X 1440, 19 IN X 1.5 IN X 5.06 IN

SENDER, STEEL, 100 TO 240 VAC, 50/60 HZ, 32 TO 122 DEG F, 2560 X 1440, 19 IN X 1.5 IN X 5.06 IN

Product Overview

The Hall Research Technologies Model U97-Ultra-2B-S Sender is part of the U97-Ultra-2B kit and is used to extend Dual Display PC Video, Stereo Audio (amplified or line level), RS-232, and up to 3 independent USB ports to a remote location up to 500 feet away on any Category Cable (CAT5e/6 etc). This product is a rack-mountable Sender Unit that connects to the Model U97-Ultra-2B-R wall-mountable Receiver. Both the Sender and Receiver can be purchased as a kit as a Model U97-Ultra-2B.

  • Combines the functions of U97-H2, UU2X4, two SKU-RGB, DVC-3 video test pattern generator and more
  • Eliminates the need for Utility Box (Receiver includes a guard plate that goes over all the connectors with zip-tie provisions)
  • Does not require external power supply (built-in supply with standard 110~240 VAC IEC320 jack)
  • Includes 2 “Direct” USB ports (DR1 & DR2), and a Standard with Hub at receiver
  • DB15 connector for Amplified audio input and loop output at the sender as well as DB15 output at the receiver to directly drive passive speakers
  • Built-in video Skew Correction on both video channels. This corrects the lacks of RGB convergence when long Cat6 cables are used. Eliminates the need to use special low-skew UTP cables for long runs
  • Built-in Test pattern generator for long cable compensation (High Frequency Gain) and Skew correction
  • Supports DDC channel with EDID (Extended display ID)

    • Technical Specs
    P/N: U97H2S Key Specs
    Item
    SENDER, STEEL, 100 TO 240 VAC, 50/60 HZ, 32 TO 122 DEG F, 2560 X 1440, 19 IN X 1.5 IN X 5.06 IN
    OEM
    Hall Research Inc.
    OEM #
    U97H2S
    Returnable
    No
    Warranty
    Power Requirements
    100 to 240 VAC, 50/60 HZ
    Product Type
    Sender
    Resolution
    2560 x 1440
    Temperature Rating
    32 to 122 Deg F

    The Hall Research Technologies Model U97-Ultra-2B-S Sender is part of the U97-Ultra-2B kit and is used to extend Dual Display PC Video, Stereo Audio (amplified or line level), RS-232, and up to 3 independent USB ports to a remote location up to 500 feet away on any Category Cable (CAT5e/6 etc). This product is a rack-mountable Sender Unit that connects to the Model U97-Ultra-2B-R wall-mountable Receiver. Both the Sender and Receiver can be purchased as a kit as a Model U97-Ultra-2B.

  • Combines the functions of U97-H2, UU2X4, two SKU-RGB, DVC-3 video test pattern generator and more
  • Eliminates the need for Utility Box (Receiver includes a guard plate that goes over all the connectors with zip-tie provisions)
  • Does not require external power supply (built-in supply with standard 110~240 VAC IEC320 jack)
  • Includes 2 “Direct” USB ports (DR1 & DR2), and a Standard with Hub at receiver
  • DB15 connector for Amplified audio input and loop output at the sender as well as DB15 output at the receiver to directly drive passive speakers
  • Built-in video Skew Correction on both video channels. This corrects the lacks of RGB convergence when long Cat6 cables are used. Eliminates the need to use special low-skew UTP cables for long runs
  • Built-in Test pattern generator for long cable compensation (High Frequency Gain) and Skew correction
  • Supports DDC channel with EDID (Extended display ID)

      • Product Overview

      The Hall Research Technologies Model U97-Ultra-2B-S Sender is part of the U97-Ultra-2B kit and is used to extend Dual Display PC Video, Stereo Audio (amplified or line level), RS-232, and up to 3 independent USB ports to a remote location up to 500 feet away on any Category Cable (CAT5e/6 etc). This product is a rack-mountable Sender Unit that connects to the Model U97-Ultra-2B-R wall-mountable Receiver. Both the Sender and Receiver can be purchased as a kit as a Model U97-Ultra-2B.

    • Combines the functions of U97-H2, UU2X4, two SKU-RGB, DVC-3 video test pattern generator and more
    • Eliminates the need for Utility Box (Receiver includes a guard plate that goes over all the connectors with zip-tie provisions)
    • Does not require external power supply (built-in supply with standard 110~240 VAC IEC320 jack)
    • Includes 2 “Direct” USB ports (DR1 & DR2), and a Standard with Hub at receiver
    • DB15 connector for Amplified audio input and loop output at the sender as well as DB15 output at the receiver to directly drive passive speakers
    • Built-in video Skew Correction on both video channels. This corrects the lacks of RGB convergence when long Cat6 cables are used. Eliminates the need to use special low-skew UTP cables for long runs
    • Built-in Test pattern generator for long cable compensation (High Frequency Gain) and Skew correction
    • Supports DDC channel with EDID (Extended display ID)

      • Technical Specs
      P/N: U97H2S Key Specs
      Item
      SENDER, STEEL, 100 TO 240 VAC, 50/60 HZ, 32 TO 122 DEG F, 2560 X 1440, 19 IN X 1.5 IN X 5.06 IN
      OEM
      Hall Research Inc.
      OEM #
      U97H2S
      Returnable
      No
      Warranty
      Power Requirements
      100 to 240 VAC, 50/60 HZ
      Product Type
      Sender
      Resolution
      2560 x 1440
      Temperature Rating
      32 to 122 Deg F

      The Hall Research Technologies Model U97-Ultra-2B-S Sender is part of the U97-Ultra-2B kit and is used to extend Dual Display PC Video, Stereo Audio (amplified or line level), RS-232, and up to 3 independent USB ports to a remote location up to 500 feet away on any Category Cable (CAT5e/6 etc). This product is a rack-mountable Sender Unit that connects to the Model U97-Ultra-2B-R wall-mountable Receiver. Both the Sender and Receiver can be purchased as a kit as a Model U97-Ultra-2B.

    • Combines the functions of U97-H2, UU2X4, two SKU-RGB, DVC-3 video test pattern generator and more
    • Eliminates the need for Utility Box (Receiver includes a guard plate that goes over all the connectors with zip-tie provisions)
    • Does not require external power supply (built-in supply with standard 110~240 VAC IEC320 jack)
    • Includes 2 “Direct” USB ports (DR1 & DR2), and a Standard with Hub at receiver
    • DB15 connector for Amplified audio input and loop output at the sender as well as DB15 output at the receiver to directly drive passive speakers
    • Built-in video Skew Correction on both video channels. This corrects the lacks of RGB convergence when long Cat6 cables are used. Eliminates the need to use special low-skew UTP cables for long runs
    • Built-in Test pattern generator for long cable compensation (High Frequency Gain) and Skew correction
    • Supports DDC channel with EDID (Extended display ID)

        • Product Overview

        The Hall Research Technologies Model U97-Ultra-2B-S Sender is part of the U97-Ultra-2B kit and is used to extend Dual Display PC Video, Stereo Audio (amplified or line level), RS-232, and up to 3 independent USB ports to a remote location up to 500 feet away on any Category Cable (CAT5e/6 etc). This product is a rack-mountable Sender Unit that connects to the Model U97-Ultra-2B-R wall-mountable Receiver. Both the Sender and Receiver can be purchased as a kit as a Model U97-Ultra-2B.

      • Combines the functions of U97-H2, UU2X4, two SKU-RGB, DVC-3 video test pattern generator and more
      • Eliminates the need for Utility Box (Receiver includes a guard plate that goes over all the connectors with zip-tie provisions)
      • Does not require external power supply (built-in supply with standard 110~240 VAC IEC320 jack)
      • Includes 2 “Direct” USB ports (DR1 & DR2), and a Standard with Hub at receiver
      • DB15 connector for Amplified audio input and loop output at the sender as well as DB15 output at the receiver to directly drive passive speakers
      • Built-in video Skew Correction on both video channels. This corrects the lacks of RGB convergence when long Cat6 cables are used. Eliminates the need to use special low-skew UTP cables for long runs
      • Built-in Test pattern generator for long cable compensation (High Frequency Gain) and Skew correction
      • Supports DDC channel with EDID (Extended display ID)

        • Technical Specs
        P/N: U97H2S Key Specs
        Item
        SENDER, STEEL, 100 TO 240 VAC, 50/60 HZ, 32 TO 122 DEG F, 2560 X 1440, 19 IN X 1.5 IN X 5.06 IN
        OEM
        Hall Research Inc.
        OEM #
        U97H2S
        Returnable
        No
        Warranty
        Power Requirements
        100 to 240 VAC, 50/60 HZ
        Product Type
        Sender
        Resolution
        2560 x 1440
        Temperature Rating
        32 to 122 Deg F

        The Hall Research Technologies Model U97-Ultra-2B-S Sender is part of the U97-Ultra-2B kit and is used to extend Dual Display PC Video, Stereo Audio (amplified or line level), RS-232, and up to 3 independent USB ports to a remote location up to 500 feet away on any Category Cable (CAT5e/6 etc). This product is a rack-mountable Sender Unit that connects to the Model U97-Ultra-2B-R wall-mountable Receiver. Both the Sender and Receiver can be purchased as a kit as a Model U97-Ultra-2B.

      • Combines the functions of U97-H2, UU2X4, two SKU-RGB, DVC-3 video test pattern generator and more
      • Eliminates the need for Utility Box (Receiver includes a guard plate that goes over all the connectors with zip-tie provisions)
      • Does not require external power supply (built-in supply with standard 110~240 VAC IEC320 jack)
      • Includes 2 “Direct” USB ports (DR1 & DR2), and a Standard with Hub at receiver
      • DB15 connector for Amplified audio input and loop output at the sender as well as DB15 output at the receiver to directly drive passive speakers
      • Built-in video Skew Correction on both video channels. This corrects the lacks of RGB convergence when long Cat6 cables are used. Eliminates the need to use special low-skew UTP cables for long runs
      • Built-in Test pattern generator for long cable compensation (High Frequency Gain) and Skew correction
      • Supports DDC channel with EDID (Extended display ID)