OEM#: UV4-SNew OEM Original Outright

VIDEO SENDER, 100 TO 240 VAC, 50 TO 60 HZ, 1920 X 1200 PIXELS, 75 OHMS IMPEDANCE, 0-50 DEG C, 4, 4 OR 8 FEMALE RJ-45 OUTPUT, 1920 X 1200 AND by Hall Research Inc.

Your price:
$609.72 eachEstimated to ship by 11/26 if ordered before 4:30 PM EST
HomeHall Research Inc.uv4s
VIDEO SENDER, 100 TO 240 VAC, 50 TO 60 HZ, 1920 X 1200 PIXELS, 75 OHMS IMPEDANCE, 0-50 DEG C, 4, 4 OR 8 FEMALE RJ-45 OUTPUT, 1920 X 1200 AND by Hall Research Inc.
VIDEO SENDER, 100 TO 240 VAC, 50 TO 60 HZ, 1920 X 1200 PIXELS, 75 OHMS IMPEDANCE, 0-50 DEG C, 4, 4 OR 8 FEMALE RJ-45 OUTPUT, 1920 X 1200 AND by Hall Research Inc.

OEM#: UV4-S
VIDEO SENDER, 100 TO 240 VAC, 50 TO 60 HZ, 1920 X 1200 PIXELS, 75 OHMS IMPEDANCE, 0-50 DEG C, 4, 4 OR 8 FEMALE RJ-45 OUTPUT, 1920 X 1200 AND by Hall Research Inc.

New OEM Original Outright
Your price:
$609.72 each
Estimated to ship by 11/26 if ordered before 4:30 PM EST
Asset Information
ADD TO LIST
Product Overview

The Model UV4-S is a 4-channel video splitter that can send a VGA or component video signal to multiple displays on CATx cable. This unit features a standard HD15 VGA connector for the input and has 4 RJ45 connectors for the outputs. It also provide an additional HD15 VGA connector for a local monitor. The UV4-S can drive UTP cables of lengths up to 500 feet. At the remote (receiving) end of the cable, a model # UV1-R is required to convert the UTP cable signal back to video for connection to a monitor. In most setups only one power supply is necessary for the entire system. The UV4-S Sender/Splitter comes with a power supply that is capable of powering itself and all the UV1-R receivers. For Cat5 runs of over 300 feet, the receivers may need their own additional supplies that must be ordered separately (HRT model # 511-PS9016A).

  • Support for local monitor at transmitter
  • Multiple Cat-5 outputs
  • Transmit video and phantom power on a single CATx cable
  • Eliminates the need for bulky, expensive and hard to build multi-coaxial cables for high-resolution video extension
  • Amplifies the signal for clean and crisp transmission
  • Differential signaling eliminates ground loops and noise
  • Handles resolutions up to 1920x1440 at 60HZ
  • Rugged, Reliable, Compact size
  • Single power supply fpr transmitter and all UV1-R receivers (under 300 ft)
  • Drive standard CATx cables to 500 feet for VGA and Component Video

    • Technical Specs
    P/N: UV4-S Key Specs
    Item
    VIDEO SENDER, 100 TO 240 VAC, 50 TO 60 HZ, 1920 X 1200 PIXELS, 75 OHMS IMPEDANCE, 0-50 DEG C, 4, 4 OR 8 FEMALE RJ-45 OUTPUT, 1920 X 1200 AND
    OEM
    Hall Research Inc.
    OEM #
    UV4-S
    Condition
    New OEM Original
    Returnable
    Yes
    Warranty
    24 Month
    Connector Type
    4 or 8 Female RJ-45 Output, VGA, SVGA, XGA, or UXGA
    Country of Origin
    USA
    Dimensions
    10.00x7.50x3.00
    Imedance
    75 Ohms
    Material
    Steel Enclosure
    Number of Ports
    4
    Power Requirements
    100 to 240 VAC, 50 to 60 HZ
    Resolution
    1920 x 1200 and 1080p at 500 ft
    Temperature Rating
    0 to 50 Deg C

    The Model UV4-S is a 4-channel video splitter that can send a VGA or component video signal to multiple displays on CATx cable. This unit features a standard HD15 VGA connector for the input and has 4 RJ45 connectors for the outputs. It also provide an additional HD15 VGA connector for a local monitor. The UV4-S can drive UTP cables of lengths up to 500 feet. At the remote (receiving) end of the cable, a model # UV1-R is required to convert the UTP cable signal back to video for connection to a monitor. In most setups only one power supply is necessary for the entire system. The UV4-S Sender/Splitter comes with a power supply that is capable of powering itself and all the UV1-R receivers. For Cat5 runs of over 300 feet, the receivers may need their own additional supplies that must be ordered separately (HRT model # 511-PS9016A).

  • Support for local monitor at transmitter
  • Multiple Cat-5 outputs
  • Transmit video and phantom power on a single CATx cable
  • Eliminates the need for bulky, expensive and hard to build multi-coaxial cables for high-resolution video extension
  • Amplifies the signal for clean and crisp transmission
  • Differential signaling eliminates ground loops and noise
  • Handles resolutions up to 1920x1440 at 60HZ
  • Rugged, Reliable, Compact size
  • Single power supply fpr transmitter and all UV1-R receivers (under 300 ft)
  • Drive standard CATx cables to 500 feet for VGA and Component Video

      • Product Overview

      The Model UV4-S is a 4-channel video splitter that can send a VGA or component video signal to multiple displays on CATx cable. This unit features a standard HD15 VGA connector for the input and has 4 RJ45 connectors for the outputs. It also provide an additional HD15 VGA connector for a local monitor. The UV4-S can drive UTP cables of lengths up to 500 feet. At the remote (receiving) end of the cable, a model # UV1-R is required to convert the UTP cable signal back to video for connection to a monitor. In most setups only one power supply is necessary for the entire system. The UV4-S Sender/Splitter comes with a power supply that is capable of powering itself and all the UV1-R receivers. For Cat5 runs of over 300 feet, the receivers may need their own additional supplies that must be ordered separately (HRT model # 511-PS9016A).

    • Support for local monitor at transmitter
    • Multiple Cat-5 outputs
    • Transmit video and phantom power on a single CATx cable
    • Eliminates the need for bulky, expensive and hard to build multi-coaxial cables for high-resolution video extension
    • Amplifies the signal for clean and crisp transmission
    • Differential signaling eliminates ground loops and noise
    • Handles resolutions up to 1920x1440 at 60HZ
    • Rugged, Reliable, Compact size
    • Single power supply fpr transmitter and all UV1-R receivers (under 300 ft)
    • Drive standard CATx cables to 500 feet for VGA and Component Video

      • Technical Specs
      P/N: UV4-S Key Specs
      Item
      VIDEO SENDER, 100 TO 240 VAC, 50 TO 60 HZ, 1920 X 1200 PIXELS, 75 OHMS IMPEDANCE, 0-50 DEG C, 4, 4 OR 8 FEMALE RJ-45 OUTPUT, 1920 X 1200 AND
      OEM
      Hall Research Inc.
      OEM #
      UV4-S
      Condition
      New OEM Original
      Returnable
      Yes
      Warranty
      24 Month
      Connector Type
      4 or 8 Female RJ-45 Output, VGA, SVGA, XGA, or UXGA
      Country of Origin
      USA
      Dimensions
      10.00x7.50x3.00
      Imedance
      75 Ohms
      Material
      Steel Enclosure
      Number of Ports
      4
      Power Requirements
      100 to 240 VAC, 50 to 60 HZ
      Resolution
      1920 x 1200 and 1080p at 500 ft
      Temperature Rating
      0 to 50 Deg C

      The Model UV4-S is a 4-channel video splitter that can send a VGA or component video signal to multiple displays on CATx cable. This unit features a standard HD15 VGA connector for the input and has 4 RJ45 connectors for the outputs. It also provide an additional HD15 VGA connector for a local monitor. The UV4-S can drive UTP cables of lengths up to 500 feet. At the remote (receiving) end of the cable, a model # UV1-R is required to convert the UTP cable signal back to video for connection to a monitor. In most setups only one power supply is necessary for the entire system. The UV4-S Sender/Splitter comes with a power supply that is capable of powering itself and all the UV1-R receivers. For Cat5 runs of over 300 feet, the receivers may need their own additional supplies that must be ordered separately (HRT model # 511-PS9016A).

    • Support for local monitor at transmitter
    • Multiple Cat-5 outputs
    • Transmit video and phantom power on a single CATx cable
    • Eliminates the need for bulky, expensive and hard to build multi-coaxial cables for high-resolution video extension
    • Amplifies the signal for clean and crisp transmission
    • Differential signaling eliminates ground loops and noise
    • Handles resolutions up to 1920x1440 at 60HZ
    • Rugged, Reliable, Compact size
    • Single power supply fpr transmitter and all UV1-R receivers (under 300 ft)
    • Drive standard CATx cables to 500 feet for VGA and Component Video

        • Product Overview

        The Model UV4-S is a 4-channel video splitter that can send a VGA or component video signal to multiple displays on CATx cable. This unit features a standard HD15 VGA connector for the input and has 4 RJ45 connectors for the outputs. It also provide an additional HD15 VGA connector for a local monitor. The UV4-S can drive UTP cables of lengths up to 500 feet. At the remote (receiving) end of the cable, a model # UV1-R is required to convert the UTP cable signal back to video for connection to a monitor. In most setups only one power supply is necessary for the entire system. The UV4-S Sender/Splitter comes with a power supply that is capable of powering itself and all the UV1-R receivers. For Cat5 runs of over 300 feet, the receivers may need their own additional supplies that must be ordered separately (HRT model # 511-PS9016A).

      • Support for local monitor at transmitter
      • Multiple Cat-5 outputs
      • Transmit video and phantom power on a single CATx cable
      • Eliminates the need for bulky, expensive and hard to build multi-coaxial cables for high-resolution video extension
      • Amplifies the signal for clean and crisp transmission
      • Differential signaling eliminates ground loops and noise
      • Handles resolutions up to 1920x1440 at 60HZ
      • Rugged, Reliable, Compact size
      • Single power supply fpr transmitter and all UV1-R receivers (under 300 ft)
      • Drive standard CATx cables to 500 feet for VGA and Component Video

        • Technical Specs
        P/N: UV4-S Key Specs
        Item
        VIDEO SENDER, 100 TO 240 VAC, 50 TO 60 HZ, 1920 X 1200 PIXELS, 75 OHMS IMPEDANCE, 0-50 DEG C, 4, 4 OR 8 FEMALE RJ-45 OUTPUT, 1920 X 1200 AND
        OEM
        Hall Research Inc.
        OEM #
        UV4-S
        Condition
        New OEM Original
        Returnable
        Yes
        Warranty
        24 Month
        Connector Type
        4 or 8 Female RJ-45 Output, VGA, SVGA, XGA, or UXGA
        Country of Origin
        USA
        Dimensions
        10.00x7.50x3.00
        Imedance
        75 Ohms
        Material
        Steel Enclosure
        Number of Ports
        4
        Power Requirements
        100 to 240 VAC, 50 to 60 HZ
        Resolution
        1920 x 1200 and 1080p at 500 ft
        Temperature Rating
        0 to 50 Deg C

        The Model UV4-S is a 4-channel video splitter that can send a VGA or component video signal to multiple displays on CATx cable. This unit features a standard HD15 VGA connector for the input and has 4 RJ45 connectors for the outputs. It also provide an additional HD15 VGA connector for a local monitor. The UV4-S can drive UTP cables of lengths up to 500 feet. At the remote (receiving) end of the cable, a model # UV1-R is required to convert the UTP cable signal back to video for connection to a monitor. In most setups only one power supply is necessary for the entire system. The UV4-S Sender/Splitter comes with a power supply that is capable of powering itself and all the UV1-R receivers. For Cat5 runs of over 300 feet, the receivers may need their own additional supplies that must be ordered separately (HRT model # 511-PS9016A).

      • Support for local monitor at transmitter
      • Multiple Cat-5 outputs
      • Transmit video and phantom power on a single CATx cable
      • Eliminates the need for bulky, expensive and hard to build multi-coaxial cables for high-resolution video extension
      • Amplifies the signal for clean and crisp transmission
      • Differential signaling eliminates ground loops and noise
      • Handles resolutions up to 1920x1440 at 60HZ
      • Rugged, Reliable, Compact size
      • Single power supply fpr transmitter and all UV1-R receivers (under 300 ft)
      • Drive standard CATx cables to 500 feet for VGA and Component Video