OEM#: 408896-001New OEM Original Outright

REAR ROLLER ASSEMBLY by GE Medical Systems Information Technology (GEMSIT)

Your price:
$794.33 eachEstimated to ship by 01/15 if ordered before 4:00 PM EST
HomeGE Medical Systems Information Technology (GEMSIT)408896001
REAR ROLLER ASSEMBLY by GE Medical Systems Information Technology (GEMSIT)
REAR ROLLER ASSEMBLY by GE Medical Systems Information Technology (GEMSIT)

OEM#: 408896-001
REAR ROLLER ASSEMBLY by GE Medical Systems Information Technology (GEMSIT)

New OEM Original Outright
Your price:
$794.33 each
Estimated to ship by 01/15 if ordered before 4:00 PM EST
Asset Information

Drop Shipped From GE - Not For Export Out Of US

ADD TO LIST
Product Overview

The Rear Roller Assembly is used in the T2100 Treadmill, which is part of the Diagnostic ECG system. It is on the opposite side of the T2100 Treadmill and is attached using a 9/16 inch bolt, one of two that holds the roller in position. A roller is a type of bearing which uses rolling elements for supporting loads and reducing friction. It uses cylinders for maintaining the separation between the moving parts of a bearing. The Shaft which acts as an axis of the roller assembly is made of cold rolled steel. Hence it can withstand even high loads. To withstand recurring movement, the springs are made of steel wire which can endure high stress. Hence it increases the working life of the product. The roller movements are aided by the roller bearings. The front roller assembly is compatible with T2000, Assembly MAC 5500 HD, Assembly T2100 Treadmill New Drive, 2000 Treadmill w/ Full Handle DOM and 2000 Treadmill w/ EMI Full Handle INT series.

Features
  • Good dimensional stability
  • High corrosion resistance
  • High fatigue endurance
  • High strength and stiffness
  • Chemical resistant to fuels and solvents
  • Good wear and abrasion resistance
  • Noise free
  • Smooth movement
  • RoHS compliant
Technical Specs
P/N: 408896-001 Key Specs
Item
REAR ROLLER ASSEMBLY
OEM
GE Medical Systems Information Technology (GEMSIT)
OEM #
408896-001
Condition
New OEM Original
Returnable
No
Warranty
90 Day
Equivalents

The Rear Roller Assembly is used in the T2100 Treadmill, which is part of the Diagnostic ECG system. It is on the opposite side of the T2100 Treadmill and is attached using a 9/16 inch bolt, one of two that holds the roller in position. A roller is a type of bearing which uses rolling elements for supporting loads and reducing friction. It uses cylinders for maintaining the separation between the moving parts of a bearing. The Shaft which acts as an axis of the roller assembly is made of cold rolled steel. Hence it can withstand even high loads. To withstand recurring movement, the springs are made of steel wire which can endure high stress. Hence it increases the working life of the product. The roller movements are aided by the roller bearings. The front roller assembly is compatible with T2000, Assembly MAC 5500 HD, Assembly T2100 Treadmill New Drive, 2000 Treadmill w/ Full Handle DOM and 2000 Treadmill w/ EMI Full Handle INT series.

  • 408896-001: Marquette (GEMSIT): Canonical Redirect
  • 408896-001: GE Healthcare: Canonical Redirect
Product Overview

The Rear Roller Assembly is used in the T2100 Treadmill, which is part of the Diagnostic ECG system. It is on the opposite side of the T2100 Treadmill and is attached using a 9/16 inch bolt, one of two that holds the roller in position. A roller is a type of bearing which uses rolling elements for supporting loads and reducing friction. It uses cylinders for maintaining the separation between the moving parts of a bearing. The Shaft which acts as an axis of the roller assembly is made of cold rolled steel. Hence it can withstand even high loads. To withstand recurring movement, the springs are made of steel wire which can endure high stress. Hence it increases the working life of the product. The roller movements are aided by the roller bearings. The front roller assembly is compatible with T2000, Assembly MAC 5500 HD, Assembly T2100 Treadmill New Drive, 2000 Treadmill w/ Full Handle DOM and 2000 Treadmill w/ EMI Full Handle INT series.

Features
  • Good dimensional stability
  • High corrosion resistance
  • High fatigue endurance
  • High strength and stiffness
  • Chemical resistant to fuels and solvents
  • Good wear and abrasion resistance
  • Noise free
  • Smooth movement
  • RoHS compliant
Technical Specs
P/N: 408896-001 Key Specs
Item
REAR ROLLER ASSEMBLY
OEM
GE Medical Systems Information Technology (GEMSIT)
OEM #
408896-001
Condition
New OEM Original
Returnable
No
Warranty
90 Day
Equivalents

The Rear Roller Assembly is used in the T2100 Treadmill, which is part of the Diagnostic ECG system. It is on the opposite side of the T2100 Treadmill and is attached using a 9/16 inch bolt, one of two that holds the roller in position. A roller is a type of bearing which uses rolling elements for supporting loads and reducing friction. It uses cylinders for maintaining the separation between the moving parts of a bearing. The Shaft which acts as an axis of the roller assembly is made of cold rolled steel. Hence it can withstand even high loads. To withstand recurring movement, the springs are made of steel wire which can endure high stress. Hence it increases the working life of the product. The roller movements are aided by the roller bearings. The front roller assembly is compatible with T2000, Assembly MAC 5500 HD, Assembly T2100 Treadmill New Drive, 2000 Treadmill w/ Full Handle DOM and 2000 Treadmill w/ EMI Full Handle INT series.

  • 408896-001: Marquette (GEMSIT): Canonical Redirect
  • 408896-001: GE Healthcare: Canonical Redirect
Product Overview

The Rear Roller Assembly is used in the T2100 Treadmill, which is part of the Diagnostic ECG system. It is on the opposite side of the T2100 Treadmill and is attached using a 9/16 inch bolt, one of two that holds the roller in position. A roller is a type of bearing which uses rolling elements for supporting loads and reducing friction. It uses cylinders for maintaining the separation between the moving parts of a bearing. The Shaft which acts as an axis of the roller assembly is made of cold rolled steel. Hence it can withstand even high loads. To withstand recurring movement, the springs are made of steel wire which can endure high stress. Hence it increases the working life of the product. The roller movements are aided by the roller bearings. The front roller assembly is compatible with T2000, Assembly MAC 5500 HD, Assembly T2100 Treadmill New Drive, 2000 Treadmill w/ Full Handle DOM and 2000 Treadmill w/ EMI Full Handle INT series.

Features
  • Good dimensional stability
  • High corrosion resistance
  • High fatigue endurance
  • High strength and stiffness
  • Chemical resistant to fuels and solvents
  • Good wear and abrasion resistance
  • Noise free
  • Smooth movement
  • RoHS compliant
Technical Specs
P/N: 408896-001 Key Specs
Item
REAR ROLLER ASSEMBLY
OEM
GE Medical Systems Information Technology (GEMSIT)
OEM #
408896-001
Condition
New OEM Original
Returnable
No
Warranty
90 Day
Equivalents

The Rear Roller Assembly is used in the T2100 Treadmill, which is part of the Diagnostic ECG system. It is on the opposite side of the T2100 Treadmill and is attached using a 9/16 inch bolt, one of two that holds the roller in position. A roller is a type of bearing which uses rolling elements for supporting loads and reducing friction. It uses cylinders for maintaining the separation between the moving parts of a bearing. The Shaft which acts as an axis of the roller assembly is made of cold rolled steel. Hence it can withstand even high loads. To withstand recurring movement, the springs are made of steel wire which can endure high stress. Hence it increases the working life of the product. The roller movements are aided by the roller bearings. The front roller assembly is compatible with T2000, Assembly MAC 5500 HD, Assembly T2100 Treadmill New Drive, 2000 Treadmill w/ Full Handle DOM and 2000 Treadmill w/ EMI Full Handle INT series.

  • 408896-001: Marquette (GEMSIT): Canonical Redirect
  • 408896-001: GE Healthcare: Canonical Redirect