ASSEMBLY - MOTHER BOARD FLEX WITH CPU WITH 2GB SDRAM 2 DVI
Exchange Purchase
Replaces GE Medical Systems Information Technology (GEMSIT) 2051751-007ASSEMBLY - MOTHER BOARD FLEX WITH CPU WITH 2GB SDRAM 2 DVI
The Mother Board Flex with CPU with 2GB SDRAM 2 DVI is and assembly that is used in Diagnostic ECG. The flex board is designed to be powered by a standard ATX (or BTX) power supply or by single +12V. Use of BTX supply is not required for operation, but may be required to drive high-power cards. The keyboard or PS/2 mouse adapter can be done through the stacked PS/2 mouse and keyboard connector. The PS/2 mouse and keyboard are supplied from SB5V when in standby mode in order to enable keyboard or mouse activity to bring the system out from power saving states. The supply is provided through a 1.1A resettable fuse. The board has an integrated SATA host controller that supports independent DMA operation on four ports and data transfer rates of up to 3.0GB/s (300MB/s). The SATA controller supports AHCI mode and has integrated RAID functionality with support for RAID modes 0 and 1. It also contains 2 Enhanced Host Controller Interface (EHCI) host controllers that support USB 2.0, allowing data transfers up to 480Mb/s.
Additional Features:
The Mother Board Flex with CPU with 2GB SDRAM 2 DVI is and assembly that is used in Diagnostic ECG. The flex board is designed to be powered by a standard ATX (or BTX) power supply or by single +12V. Use of BTX supply is not required for operation, but may be required to drive high-power cards. The keyboard or PS/2 mouse adapter can be done through the stacked PS/2 mouse and keyboard connector. The PS/2 mouse and keyboard are supplied from SB5V when in standby mode in order to enable keyboard or mouse activity to bring the system out from power saving states. The supply is provided through a 1.1A resettable fuse. The board has an integrated SATA host controller that supports independent DMA operation on four ports and data transfer rates of up to 3.0GB/s (300MB/s). The SATA controller supports AHCI mode and has integrated RAID functionality with support for RAID modes 0 and 1. It also contains 2 Enhanced Host Controller Interface (EHCI) host controllers that support USB 2.0, allowing data transfers up to 480Mb/s.
Additional Features:
The Mother Board Flex with CPU with 2GB SDRAM 2 DVI is and assembly that is used in Diagnostic ECG. The flex board is designed to be powered by a standard ATX (or BTX) power supply or by single +12V. Use of BTX supply is not required for operation, but may be required to drive high-power cards. The keyboard or PS/2 mouse adapter can be done through the stacked PS/2 mouse and keyboard connector. The PS/2 mouse and keyboard are supplied from SB5V when in standby mode in order to enable keyboard or mouse activity to bring the system out from power saving states. The supply is provided through a 1.1A resettable fuse. The board has an integrated SATA host controller that supports independent DMA operation on four ports and data transfer rates of up to 3.0GB/s (300MB/s). The SATA controller supports AHCI mode and has integrated RAID functionality with support for RAID modes 0 and 1. It also contains 2 Enhanced Host Controller Interface (EHCI) host controllers that support USB 2.0, allowing data transfers up to 480Mb/s.
Additional Features:
The Mother Board Flex with CPU with 2GB SDRAM 2 DVI is and assembly that is used in Diagnostic ECG. The flex board is designed to be powered by a standard ATX (or BTX) power supply or by single +12V. Use of BTX supply is not required for operation, but may be required to drive high-power cards. The keyboard or PS/2 mouse adapter can be done through the stacked PS/2 mouse and keyboard connector. The PS/2 mouse and keyboard are supplied from SB5V when in standby mode in order to enable keyboard or mouse activity to bring the system out from power saving states. The supply is provided through a 1.1A resettable fuse. The board has an integrated SATA host controller that supports independent DMA operation on four ports and data transfer rates of up to 3.0GB/s (300MB/s). The SATA controller supports AHCI mode and has integrated RAID functionality with support for RAID modes 0 and 1. It also contains 2 Enhanced Host Controller Interface (EHCI) host controllers that support USB 2.0, allowing data transfers up to 480Mb/s.
Additional Features:
The Mother Board Flex with CPU with 2GB SDRAM 2 DVI is and assembly that is used in Diagnostic ECG. The flex board is designed to be powered by a standard ATX (or BTX) power supply or by single +12V. Use of BTX supply is not required for operation, but may be required to drive high-power cards. The keyboard or PS/2 mouse adapter can be done through the stacked PS/2 mouse and keyboard connector. The PS/2 mouse and keyboard are supplied from SB5V when in standby mode in order to enable keyboard or mouse activity to bring the system out from power saving states. The supply is provided through a 1.1A resettable fuse. The board has an integrated SATA host controller that supports independent DMA operation on four ports and data transfer rates of up to 3.0GB/s (300MB/s). The SATA controller supports AHCI mode and has integrated RAID functionality with support for RAID modes 0 and 1. It also contains 2 Enhanced Host Controller Interface (EHCI) host controllers that support USB 2.0, allowing data transfers up to 480Mb/s.
Additional Features:
The Mother Board Flex with CPU with 2GB SDRAM 2 DVI is and assembly that is used in Diagnostic ECG. The flex board is designed to be powered by a standard ATX (or BTX) power supply or by single +12V. Use of BTX supply is not required for operation, but may be required to drive high-power cards. The keyboard or PS/2 mouse adapter can be done through the stacked PS/2 mouse and keyboard connector. The PS/2 mouse and keyboard are supplied from SB5V when in standby mode in order to enable keyboard or mouse activity to bring the system out from power saving states. The supply is provided through a 1.1A resettable fuse. The board has an integrated SATA host controller that supports independent DMA operation on four ports and data transfer rates of up to 3.0GB/s (300MB/s). The SATA controller supports AHCI mode and has integrated RAID functionality with support for RAID modes 0 and 1. It also contains 2 Enhanced Host Controller Interface (EHCI) host controllers that support USB 2.0, allowing data transfers up to 480Mb/s.
Additional Features: