Replaces GE Medical Systems Information Technology (GEMSIT) 2022332-004

PCB ASSEMBLY COMMUNICATION BOARD-ROHS

The PCB Assembly MAC 5500 XM Communication Board is used in diagnostic ECG systems. This board is compatible with CPU board 801212-008 and it is not compatible with CPU boards 801212-007 or 801212-006. One should ensure which software versions are compatible with which CPU and communication boards before replace either board or upgrading your software. The 2022332-004 communication board is not compatible with the version 10A software. If it needs to be upgraded to this communication board on a device with version 10A software, one should upgrade to software version 10B. The 2022332-004 communication board is not compatible with the version 9C software. If it needs to be upgraded to this communication board on a device with 9C software, one should upgrade to software version 9D. When replacing an earlier board, one must order an SD card with the appropriate software version. To safely remove the communication board, grasp the side edges of the communications board and work it back and forth in the slot as pull it out along its rails and insert the new communications board, sliding it onto the rails until it is seated in place.

The PCB Assembly MAC 5500 XM Communication Board is used in diagnostic ECG systems. This board is compatible with CPU board 801212-008 and it is not compatible with CPU boards 801212-007 or 801212-006. One should ensure which software versions are compatible with which CPU and communication boards before replace either board or upgrading your software. The 2022332-004 communication board is not compatible with the version 10A software. If it needs to be upgraded to this communication board on a device with version 10A software, one should upgrade to software version 10B. The 2022332-004 communication board is not compatible with the version 9C software. If it needs to be upgraded to this communication board on a device with 9C software, one should upgrade to software version 9D. When replacing an earlier board, one must order an SD card with the appropriate software version. To safely remove the communication board, grasp the side edges of the communications board and work it back and forth in the slot as pull it out along its rails and insert the new communications board, sliding it onto the rails until it is seated in place.

• 2022332-001: GE Medical Systems Information Technology (GEMSIT): Item Replacement
• 2022332-002: GE Healthcare: Canonical Redirect
• 2022332-003: Marquette (GEMSIT): Canonical Redirect
• 2022332-003: GE Medical Systems Information Technology (GEMSIT): Item Replacement
• 2022332-004: GE Healthcare: Canonical Redirect
• 2022332-004: Marquette (GEMSIT): Canonical Redirect

• Marquette (GEMSIT)
  • MAC 5500
• GE Medical Systems Information Technology (GEMSIT)
  • MAC 5500