Sign InRegister
Departments
Solutions
PRO
Browsing History
Replaces GE Healthcare 5350006-2Tested Exchange
LOCUST DRIVE BOARD
Your price:
$1,925.07 each $6,507.00 Savings: $4,581.93 (70%)
Estimated to ship by 11/25 if ordered before 6:30 PM ESTBUYING OPTIONS:
Tested
Exchange PurchaseWarranty: 6 Month
Tested
Outright Purchase
$4,228.34 eachWarranty: 6 Month
New OEM Original
Outright Purchase
Warranty: 90 Day
View All
Replaces GE Healthcare 5350006-2LOCUST DRIVE BOARD
Tested
Exchange
ExchangeGoods sold on an “Exchange” basis require that Buyer return a like, repairable item within 15 days (or the seller's specified time frame) in order to receive the price quoted. For full details, see Terms and Conditions.
Your price:
$1,925.07 each
Ready to ShipAsset Information
Part #5350006-2
ADD TO LIST
Product Overview
The Locust Board with Drive Improvement is a component in the Mobile Digital RAD X-ray system. It has the following main system functions like motion Control, CAN communications, system bus interface, battery transition interface, power supplies, diagnostics, redundancy and switch/brake/latch control. The locust drive board will provide for green LEDs to indicate the status of the 15V, 5V, 3.3V and 1.8V power supply voltages. It will also provide for red LEDs for power fuse error and board reset. Finally, the board will provide for two green LEDs for the heartbeat of the DSP and CPLD and a yellow LED to indicate the DSP in safe mode. The locust drive board core components are Digital Signal Processing (DSP) and complex programmable logic device (CPLD). The core is responsible to receive drive input signal from Drive handle and other switches to control the system motion and tube positioning. The logic is also responsible to check the collision sensor and other errors on the drive subsystem to prevent unintended motion. All these are arranged and kept in a carrying case with the shipment label. These are more portable and can be transported at ease. It is used in a wide range of medical equipment such as Light Speed Ultra Upgrade, Konica Aero DR Controller (GEDI) many other medical devices.
Additional Features:
Technical Specs
P/N: 5350006-2 Key Specs
Item
LOCUST DRIVE BOARD
OEM
GE Healthcare
OEM #
5350006-2
Condition
Tested
Returnable
No
Warranty
6 Month
Fitments
The Locust Board with Drive Improvement is a component in the Mobile Digital RAD X-ray system. It has the following main system functions like motion Control, CAN communications, system bus interface, battery transition interface, power supplies, diagnostics, redundancy and switch/brake/latch control. The locust drive board will provide for green LEDs to indicate the status of the 15V, 5V, 3.3V and 1.8V power supply voltages. It will also provide for red LEDs for power fuse error and board reset. Finally, the board will provide for two green LEDs for the heartbeat of the DSP and CPLD and a yellow LED to indicate the DSP in safe mode. The locust drive board core components are Digital Signal Processing (DSP) and complex programmable logic device (CPLD). The core is responsible to receive drive input signal from Drive handle and other switches to control the system motion and tube positioning. The logic is also responsible to check the collision sensor and other errors on the drive subsystem to prevent unintended motion. All these are arranged and kept in a carrying case with the shipment label. These are more portable and can be transported at ease. It is used in a wide range of medical equipment such as Light Speed Ultra Upgrade, Konica Aero DR Controller (GEDI) many other medical devices.
Additional Features:
- GE Healthcare
- OPTIMA XR220
- OPTIMA XR200
- BRIVO XR285 AMX
- OPTIMA XR240
Product Overview
The Locust Board with Drive Improvement is a component in the Mobile Digital RAD X-ray system. It has the following main system functions like motion Control, CAN communications, system bus interface, battery transition interface, power supplies, diagnostics, redundancy and switch/brake/latch control. The locust drive board will provide for green LEDs to indicate the status of the 15V, 5V, 3.3V and 1.8V power supply voltages. It will also provide for red LEDs for power fuse error and board reset. Finally, the board will provide for two green LEDs for the heartbeat of the DSP and CPLD and a yellow LED to indicate the DSP in safe mode. The locust drive board core components are Digital Signal Processing (DSP) and complex programmable logic device (CPLD). The core is responsible to receive drive input signal from Drive handle and other switches to control the system motion and tube positioning. The logic is also responsible to check the collision sensor and other errors on the drive subsystem to prevent unintended motion. All these are arranged and kept in a carrying case with the shipment label. These are more portable and can be transported at ease. It is used in a wide range of medical equipment such as Light Speed Ultra Upgrade, Konica Aero DR Controller (GEDI) many other medical devices.
Additional Features:
Technical Specs
P/N: 5350006-2 Key Specs
Item
LOCUST DRIVE BOARD
OEM
GE Healthcare
OEM #
5350006-2
Condition
Tested
Returnable
No
Warranty
6 Month
Fitments
The Locust Board with Drive Improvement is a component in the Mobile Digital RAD X-ray system. It has the following main system functions like motion Control, CAN communications, system bus interface, battery transition interface, power supplies, diagnostics, redundancy and switch/brake/latch control. The locust drive board will provide for green LEDs to indicate the status of the 15V, 5V, 3.3V and 1.8V power supply voltages. It will also provide for red LEDs for power fuse error and board reset. Finally, the board will provide for two green LEDs for the heartbeat of the DSP and CPLD and a yellow LED to indicate the DSP in safe mode. The locust drive board core components are Digital Signal Processing (DSP) and complex programmable logic device (CPLD). The core is responsible to receive drive input signal from Drive handle and other switches to control the system motion and tube positioning. The logic is also responsible to check the collision sensor and other errors on the drive subsystem to prevent unintended motion. All these are arranged and kept in a carrying case with the shipment label. These are more portable and can be transported at ease. It is used in a wide range of medical equipment such as Light Speed Ultra Upgrade, Konica Aero DR Controller (GEDI) many other medical devices.
Additional Features:
- GE Healthcare
- OPTIMA XR220
- OPTIMA XR200
- BRIVO XR285 AMX
- OPTIMA XR240
Product Overview
The Locust Board with Drive Improvement is a component in the Mobile Digital RAD X-ray system. It has the following main system functions like motion Control, CAN communications, system bus interface, battery transition interface, power supplies, diagnostics, redundancy and switch/brake/latch control. The locust drive board will provide for green LEDs to indicate the status of the 15V, 5V, 3.3V and 1.8V power supply voltages. It will also provide for red LEDs for power fuse error and board reset. Finally, the board will provide for two green LEDs for the heartbeat of the DSP and CPLD and a yellow LED to indicate the DSP in safe mode. The locust drive board core components are Digital Signal Processing (DSP) and complex programmable logic device (CPLD). The core is responsible to receive drive input signal from Drive handle and other switches to control the system motion and tube positioning. The logic is also responsible to check the collision sensor and other errors on the drive subsystem to prevent unintended motion. All these are arranged and kept in a carrying case with the shipment label. These are more portable and can be transported at ease. It is used in a wide range of medical equipment such as Light Speed Ultra Upgrade, Konica Aero DR Controller (GEDI) many other medical devices.
Additional Features:
Technical Specs
P/N: 5350006-2 Key Specs
Item
LOCUST DRIVE BOARD
OEM
GE Healthcare
OEM #
5350006-2
Condition
Tested
Returnable
No
Warranty
6 Month
Fitments
The Locust Board with Drive Improvement is a component in the Mobile Digital RAD X-ray system. It has the following main system functions like motion Control, CAN communications, system bus interface, battery transition interface, power supplies, diagnostics, redundancy and switch/brake/latch control. The locust drive board will provide for green LEDs to indicate the status of the 15V, 5V, 3.3V and 1.8V power supply voltages. It will also provide for red LEDs for power fuse error and board reset. Finally, the board will provide for two green LEDs for the heartbeat of the DSP and CPLD and a yellow LED to indicate the DSP in safe mode. The locust drive board core components are Digital Signal Processing (DSP) and complex programmable logic device (CPLD). The core is responsible to receive drive input signal from Drive handle and other switches to control the system motion and tube positioning. The logic is also responsible to check the collision sensor and other errors on the drive subsystem to prevent unintended motion. All these are arranged and kept in a carrying case with the shipment label. These are more portable and can be transported at ease. It is used in a wide range of medical equipment such as Light Speed Ultra Upgrade, Konica Aero DR Controller (GEDI) many other medical devices.
Additional Features:
- GE Healthcare
- OPTIMA XR220
- OPTIMA XR200
- BRIVO XR285 AMX
- OPTIMA XR240