Sign InRegister
Departments
Solutions
PRO
Browsing History
Main Menu
Batteries
Biomedical
Cables & Sensors
Computers & Electronics
Facilities & Workspaces
Laboratory
Lighting & Bulbs
Medical Imaging
Minor Equipment
On-Site Service
Repair
Training
Shop by OEM
Shop by Model
Main Menu
Provider
Supplier
Government
Partners
GPOs
Resources
About
Main Menu
About PartsSource PRO
On-Demand Parts
On-Demand Service
Repair & Service Agreements
Main Menu
My Account
Orders
Parts Quotes
Depot Repairs & Quotes
On-Site Service
Submit Work Orders
Exchanges & Returns
Settings
Main Menu
Month over Month Spend
Prior Rebates
Main Menu
My Lists
Create New List
OEM#: 46-329150G1New OEM Original Outright
MYLAR COVER 46-329150G1 by GE Healthcare
Your price:
$1,121.80 each $1,248.00 Savings: $126.20 (10%)
Estimated to ship by 12/26 if ordered before 7:00 PM EST
OEM#: 46-329150G1MYLAR COVER 46-329150G1 by GE Healthcare
New OEM Original Outright
Your price:
$1,121.80 each
$1,248.00 Savings: $126.20 (10%)
Ready to ShipEstimated to ship by 12/26 if ordered before 7:00 PM EST
Asset Information
Not For Export Out Of US
ADD TO LIST
Product Overview
The Mylar Cover assembly consist of a foot end, head end, Mylar sheet, a self-locking cable tie and applicable labels. It is used in the precision table cover collector of an X-ray device. It is made from either polyester film or plastic sheet material. This is done by heating the polyethylene terephthalate film that has two sides, which one side will have an even and a flat finish and other side of the sheet will be used in different products for overlaying. The sheets have a long life of many years and can be made into various shapes and sizes. In order to layer or cover the paper and to secure them, these sheets are used. The cover has two ends namely, head and foot. Both the ends are made from cold rolled sheets, which have high temperature atmosphere and corrosion resistance. The products which undergo a cold rolling process are made to reduce their thickness. In general cold rolled products do contain carbon content. F-03 oyster gray and GE gray is the outer cover finish.
Additional Features:
Features
- Tough and transparent
- Higher-level surface finish and tolerance
- High steel strength
- Excellent dimensional stability
Technical Specs
P/N: 46-329150G1 Key Specs
Item
MYLAR COVER 46-329150G1
OEM
GE Healthcare
OEM #
46-329150G1
Condition
New OEM Original
Returnable
No
Warranty
90 Day
Fitments
The Mylar Cover assembly consist of a foot end, head end, Mylar sheet, a self-locking cable tie and applicable labels. It is used in the precision table cover collector of an X-ray device. It is made from either polyester film or plastic sheet material. This is done by heating the polyethylene terephthalate film that has two sides, which one side will have an even and a flat finish and other side of the sheet will be used in different products for overlaying. The sheets have a long life of many years and can be made into various shapes and sizes. In order to layer or cover the paper and to secure them, these sheets are used. The cover has two ends namely, head and foot. Both the ends are made from cold rolled sheets, which have high temperature atmosphere and corrosion resistance. The products which undergo a cold rolling process are made to reduce their thickness. In general cold rolled products do contain carbon content. F-03 oyster gray and GE gray is the outer cover finish.
Additional Features:
- GE Healthcare
- PRECISION 500D
- RFX
- SFX
- SFX II
- LEGACY
- RFX II
- LEGACY PHASE II
- LEGACY PHASE III
Product Overview
The Mylar Cover assembly consist of a foot end, head end, Mylar sheet, a self-locking cable tie and applicable labels. It is used in the precision table cover collector of an X-ray device. It is made from either polyester film or plastic sheet material. This is done by heating the polyethylene terephthalate film that has two sides, which one side will have an even and a flat finish and other side of the sheet will be used in different products for overlaying. The sheets have a long life of many years and can be made into various shapes and sizes. In order to layer or cover the paper and to secure them, these sheets are used. The cover has two ends namely, head and foot. Both the ends are made from cold rolled sheets, which have high temperature atmosphere and corrosion resistance. The products which undergo a cold rolling process are made to reduce their thickness. In general cold rolled products do contain carbon content. F-03 oyster gray and GE gray is the outer cover finish.
Additional Features:
Features
- Tough and transparent
- Higher-level surface finish and tolerance
- High steel strength
- Excellent dimensional stability
Technical Specs
P/N: 46-329150G1 Key Specs
Item
MYLAR COVER 46-329150G1
OEM
GE Healthcare
OEM #
46-329150G1
Condition
New OEM Original
Returnable
No
Warranty
90 Day
Fitments
The Mylar Cover assembly consist of a foot end, head end, Mylar sheet, a self-locking cable tie and applicable labels. It is used in the precision table cover collector of an X-ray device. It is made from either polyester film or plastic sheet material. This is done by heating the polyethylene terephthalate film that has two sides, which one side will have an even and a flat finish and other side of the sheet will be used in different products for overlaying. The sheets have a long life of many years and can be made into various shapes and sizes. In order to layer or cover the paper and to secure them, these sheets are used. The cover has two ends namely, head and foot. Both the ends are made from cold rolled sheets, which have high temperature atmosphere and corrosion resistance. The products which undergo a cold rolling process are made to reduce their thickness. In general cold rolled products do contain carbon content. F-03 oyster gray and GE gray is the outer cover finish.
Additional Features:
- GE Healthcare
- PRECISION 500D
- RFX
- SFX
- SFX II
- LEGACY
- RFX II
- LEGACY PHASE II
- LEGACY PHASE III
Product Overview
The Mylar Cover assembly consist of a foot end, head end, Mylar sheet, a self-locking cable tie and applicable labels. It is used in the precision table cover collector of an X-ray device. It is made from either polyester film or plastic sheet material. This is done by heating the polyethylene terephthalate film that has two sides, which one side will have an even and a flat finish and other side of the sheet will be used in different products for overlaying. The sheets have a long life of many years and can be made into various shapes and sizes. In order to layer or cover the paper and to secure them, these sheets are used. The cover has two ends namely, head and foot. Both the ends are made from cold rolled sheets, which have high temperature atmosphere and corrosion resistance. The products which undergo a cold rolling process are made to reduce their thickness. In general cold rolled products do contain carbon content. F-03 oyster gray and GE gray is the outer cover finish.
Additional Features:
Features
- Tough and transparent
- Higher-level surface finish and tolerance
- High steel strength
- Excellent dimensional stability
How can we
improve our item listing
?Technical Specs
P/N: 46-329150G1 Key Specs
Item
MYLAR COVER 46-329150G1
OEM
GE Healthcare
OEM #
46-329150G1
Condition
New OEM Original
Returnable
No
Warranty
90 Day
Fitments
The Mylar Cover assembly consist of a foot end, head end, Mylar sheet, a self-locking cable tie and applicable labels. It is used in the precision table cover collector of an X-ray device. It is made from either polyester film or plastic sheet material. This is done by heating the polyethylene terephthalate film that has two sides, which one side will have an even and a flat finish and other side of the sheet will be used in different products for overlaying. The sheets have a long life of many years and can be made into various shapes and sizes. In order to layer or cover the paper and to secure them, these sheets are used. The cover has two ends namely, head and foot. Both the ends are made from cold rolled sheets, which have high temperature atmosphere and corrosion resistance. The products which undergo a cold rolling process are made to reduce their thickness. In general cold rolled products do contain carbon content. F-03 oyster gray and GE gray is the outer cover finish.
Additional Features:
- GE Healthcare
- PRECISION 500D
- RFX
- SFX
- SFX II
- LEGACY
- RFX II
- LEGACY PHASE II
- LEGACY PHASE III