Sign InRegister
Departments
Solutions
PRO
Browsing History
Main Menu
Batteries
Biomedical
Cables & Sensors
Computers & Electronics
Facilities & Workspaces
Laboratory
Lighting & Bulbs
Medical Imaging
Minor Equipment
On-Site Service
Repair
Training
Shop by OEM
Shop by Model
Main Menu
Provider
Supplier
Government
Partners
GPOs
Resources
About
Main Menu
About PartsSource PRO
On-Demand Parts
On-Demand Service
Repair & Service Agreements
Main Menu
My Account
Orders
Parts Quotes
Depot Repairs & Quotes
On-Site Service
Submit Work Orders
Exchanges & Returns
Settings
Main Menu
Month over Month Spend
Prior Rebates
Main Menu
My Lists
Create New List
OEM#: 46-271127P1New OEM Original Outright
MOLDED PLASTIC RESERVOIR WITH CAP/RUBBER GASKET by GE Healthcare
Your price:
$449.44 each $500.00 Savings: $50.56 (10%)
Estimated to ship by 11/25 if ordered before 6:00 PM EST
OEM#: 46-271127P1MOLDED PLASTIC RESERVOIR WITH CAP/RUBBER GASKET by GE Healthcare
New OEM Original Outright
Your price:
$449.44 each
$500.00 Savings: $50.56 (10%)
Estimated to ship by 11/25 if ordered before 6:00 PM EST
Asset Information
Drop Shipped From GE - Not For Export Out Of US
ADD TO LIST
Product Overview
The Molded Plastic Reservoir with Cap & Rubber Gasket is a reservoir that is a cylindrical part used in MRI and other applications. It consists of a molded plastic reservoir, cap and a rubber gasket. The reservoir is transparent which allows to look up the water droplet level. The cap is located on the top and two outlets at the bottom of the reservoir. It is a large capacity plastic reservoir with a 280 cm³ volume. The bellows are supplied with CP2293-85 and out bellows are supplied with 4342-355. The reservoir accepts a Ø1/16" diameter hose. It is provided with a cap 4325-148 and an adaptor. The moisture barrier has to be removed, before fixing the rubber gasket between the vented cap and the reservoir. It is a RoHS compliant. The two outlets are sealed and fixed to the equipment, whereas the cap acts as a screw on the top of the reservoir to avoid the leakage from the equipment. If air gets inside the system, it affects the reservoir levels. To avoid this, the cap is emitted to make the gasket bend inwards. The cap is made by molding the plastic in round shape, which is resistance to shock and water. It is manufactured at a low cost. The Buna-N rubber gasket has a good elasticity and good non-polar solvent resistance.
Additional Features:
Features
- Excellent abrasion resistance
- Good tear resistance
- Resistant to oil, fuel and chemicals
- High strength and thermal conductivity
Technical Specs
P/N: 46-271127P1 Key Specs
Item
MOLDED PLASTIC RESERVOIR WITH CAP/RUBBER GASKET
OEM
GE Healthcare
OEM #
46-271127P1
Condition
New OEM Original
Returnable
No
Warranty
90 Day
Material
Plastic
The Molded Plastic Reservoir with Cap & Rubber Gasket is a reservoir that is a cylindrical part used in MRI and other applications. It consists of a molded plastic reservoir, cap and a rubber gasket. The reservoir is transparent which allows to look up the water droplet level. The cap is located on the top and two outlets at the bottom of the reservoir. It is a large capacity plastic reservoir with a 280 cm³ volume. The bellows are supplied with CP2293-85 and out bellows are supplied with 4342-355. The reservoir accepts a Ø1/16" diameter hose. It is provided with a cap 4325-148 and an adaptor. The moisture barrier has to be removed, before fixing the rubber gasket between the vented cap and the reservoir. It is a RoHS compliant. The two outlets are sealed and fixed to the equipment, whereas the cap acts as a screw on the top of the reservoir to avoid the leakage from the equipment. If air gets inside the system, it affects the reservoir levels. To avoid this, the cap is emitted to make the gasket bend inwards. The cap is made by molding the plastic in round shape, which is resistance to shock and water. It is manufactured at a low cost. The Buna-N rubber gasket has a good elasticity and good non-polar solvent resistance.
Additional Features:
Product Overview
The Molded Plastic Reservoir with Cap & Rubber Gasket is a reservoir that is a cylindrical part used in MRI and other applications. It consists of a molded plastic reservoir, cap and a rubber gasket. The reservoir is transparent which allows to look up the water droplet level. The cap is located on the top and two outlets at the bottom of the reservoir. It is a large capacity plastic reservoir with a 280 cm³ volume. The bellows are supplied with CP2293-85 and out bellows are supplied with 4342-355. The reservoir accepts a Ø1/16" diameter hose. It is provided with a cap 4325-148 and an adaptor. The moisture barrier has to be removed, before fixing the rubber gasket between the vented cap and the reservoir. It is a RoHS compliant. The two outlets are sealed and fixed to the equipment, whereas the cap acts as a screw on the top of the reservoir to avoid the leakage from the equipment. If air gets inside the system, it affects the reservoir levels. To avoid this, the cap is emitted to make the gasket bend inwards. The cap is made by molding the plastic in round shape, which is resistance to shock and water. It is manufactured at a low cost. The Buna-N rubber gasket has a good elasticity and good non-polar solvent resistance.
Additional Features:
Features
- Excellent abrasion resistance
- Good tear resistance
- Resistant to oil, fuel and chemicals
- High strength and thermal conductivity
Technical Specs
P/N: 46-271127P1 Key Specs
Item
MOLDED PLASTIC RESERVOIR WITH CAP/RUBBER GASKET
OEM
GE Healthcare
OEM #
46-271127P1
Condition
New OEM Original
Returnable
No
Warranty
90 Day
Material
Plastic
The Molded Plastic Reservoir with Cap & Rubber Gasket is a reservoir that is a cylindrical part used in MRI and other applications. It consists of a molded plastic reservoir, cap and a rubber gasket. The reservoir is transparent which allows to look up the water droplet level. The cap is located on the top and two outlets at the bottom of the reservoir. It is a large capacity plastic reservoir with a 280 cm³ volume. The bellows are supplied with CP2293-85 and out bellows are supplied with 4342-355. The reservoir accepts a Ø1/16" diameter hose. It is provided with a cap 4325-148 and an adaptor. The moisture barrier has to be removed, before fixing the rubber gasket between the vented cap and the reservoir. It is a RoHS compliant. The two outlets are sealed and fixed to the equipment, whereas the cap acts as a screw on the top of the reservoir to avoid the leakage from the equipment. If air gets inside the system, it affects the reservoir levels. To avoid this, the cap is emitted to make the gasket bend inwards. The cap is made by molding the plastic in round shape, which is resistance to shock and water. It is manufactured at a low cost. The Buna-N rubber gasket has a good elasticity and good non-polar solvent resistance.
Additional Features:
Product Overview
The Molded Plastic Reservoir with Cap & Rubber Gasket is a reservoir that is a cylindrical part used in MRI and other applications. It consists of a molded plastic reservoir, cap and a rubber gasket. The reservoir is transparent which allows to look up the water droplet level. The cap is located on the top and two outlets at the bottom of the reservoir. It is a large capacity plastic reservoir with a 280 cm³ volume. The bellows are supplied with CP2293-85 and out bellows are supplied with 4342-355. The reservoir accepts a Ø1/16" diameter hose. It is provided with a cap 4325-148 and an adaptor. The moisture barrier has to be removed, before fixing the rubber gasket between the vented cap and the reservoir. It is a RoHS compliant. The two outlets are sealed and fixed to the equipment, whereas the cap acts as a screw on the top of the reservoir to avoid the leakage from the equipment. If air gets inside the system, it affects the reservoir levels. To avoid this, the cap is emitted to make the gasket bend inwards. The cap is made by molding the plastic in round shape, which is resistance to shock and water. It is manufactured at a low cost. The Buna-N rubber gasket has a good elasticity and good non-polar solvent resistance.
Additional Features:
Features
- Excellent abrasion resistance
- Good tear resistance
- Resistant to oil, fuel and chemicals
- High strength and thermal conductivity
How can we
improve our item listing
?Technical Specs
P/N: 46-271127P1 Key Specs
Item
MOLDED PLASTIC RESERVOIR WITH CAP/RUBBER GASKET
OEM
GE Healthcare
OEM #
46-271127P1
Condition
New OEM Original
Returnable
No
Warranty
90 Day
Material
Plastic
The Molded Plastic Reservoir with Cap & Rubber Gasket is a reservoir that is a cylindrical part used in MRI and other applications. It consists of a molded plastic reservoir, cap and a rubber gasket. The reservoir is transparent which allows to look up the water droplet level. The cap is located on the top and two outlets at the bottom of the reservoir. It is a large capacity plastic reservoir with a 280 cm³ volume. The bellows are supplied with CP2293-85 and out bellows are supplied with 4342-355. The reservoir accepts a Ø1/16" diameter hose. It is provided with a cap 4325-148 and an adaptor. The moisture barrier has to be removed, before fixing the rubber gasket between the vented cap and the reservoir. It is a RoHS compliant. The two outlets are sealed and fixed to the equipment, whereas the cap acts as a screw on the top of the reservoir to avoid the leakage from the equipment. If air gets inside the system, it affects the reservoir levels. To avoid this, the cap is emitted to make the gasket bend inwards. The cap is made by molding the plastic in round shape, which is resistance to shock and water. It is manufactured at a low cost. The Buna-N rubber gasket has a good elasticity and good non-polar solvent resistance.
Additional Features: