Replaces GE Healthcare 46-268418P1New Aftermarket Outright

COLLIMATOR POINTER, GE-18-AC-01S*, #1121

Your price:
$37.03 each
$94.40 Savings: $57.37 (61%)
Estimated to ship by 11/26 if ordered before 5:00 PM EST
HomeGE Healthcare46268418p1
COLLIMATOR POINTER, GE-18-AC-01S*, #1121
COLLIMATOR POINTER, GE-18-AC-01S*, #1121
COLLIMATOR POINTER, GE-18-AC-01S*, #1121

Replaces GE Healthcare 46-268418P1
COLLIMATOR POINTER, GE-18-AC-01S*, #1121

New Aftermarket Outright
Your price:
$37.03 each
$94.40 Savings: $57.37 (61%)
Estimated to ship by 11/26 if ordered before 5:00 PM EST
Asset Information
ADD TO LIST
Product Overview

The Pointer is being used as one of the components in X-ray machines. It is made of polycarbonate sheet material, which gives a good surface finish as well as being transparent. It is made using high precision technique, which facilitate good dimensional accuracy. The dimensional accuracy allows the pointer to provide the perfect fit in the assembly as per the requirement. The good mechanical properties of the pointer such as high toughness, impact strength, high tensile strength and low deformation under load, which enhances the long life span for the pointer. The high impact strength of the material provides the ability to absorb the energy during deformation. It also has good creep resistance which allows the pointer to resist deformation under the influence of mechanical stress. Three through holes are made in the pointer, the diameters are 6.45mm, 2.50mm and 2.50mm.


Additional Features:
  • High heat deflection temperature
  • Absorbs very little moisture
  • Low frequency material
  • High voltage material
  • Good electrical insulating properties
  • High strength retention at elevated temperature
  • High Tensile
  • Low deformation under load
  • Excellent creep and cold flow resistance
  • Low co-efficient of thermal expansion
  • Good surface finish

    • Technical Specs
    P/N: 46-268418P1 Key Specs
    Item
    COLLIMATOR POINTER, GE-18-AC-01S*, #1121
    OEM
    GE Healthcare
    OEM #
    46-268418P1
    Condition
    New Aftermarket
    Returnable
    Yes
    Warranty
    As Is
    Fitments

    The Pointer is being used as one of the components in X-ray machines. It is made of polycarbonate sheet material, which gives a good surface finish as well as being transparent. It is made using high precision technique, which facilitate good dimensional accuracy. The dimensional accuracy allows the pointer to provide the perfect fit in the assembly as per the requirement. The good mechanical properties of the pointer such as high toughness, impact strength, high tensile strength and low deformation under load, which enhances the long life span for the pointer. The high impact strength of the material provides the ability to absorb the energy during deformation. It also has good creep resistance which allows the pointer to resist deformation under the influence of mechanical stress. Three through holes are made in the pointer, the diameters are 6.45mm, 2.50mm and 2.50mm.


    Additional Features:
  • High heat deflection temperature
  • Absorbs very little moisture
  • Low frequency material
  • High voltage material
  • Good electrical insulating properties
  • High strength retention at elevated temperature
  • High Tensile
  • Low deformation under load
  • Excellent creep and cold flow resistance
  • Low co-efficient of thermal expansion
  • Good surface finish

      • GE Healthcare
        • AMX 4
        • DEFINIUM AMX 700
        • AMX 4 PLUS
      Product Overview

      The Pointer is being used as one of the components in X-ray machines. It is made of polycarbonate sheet material, which gives a good surface finish as well as being transparent. It is made using high precision technique, which facilitate good dimensional accuracy. The dimensional accuracy allows the pointer to provide the perfect fit in the assembly as per the requirement. The good mechanical properties of the pointer such as high toughness, impact strength, high tensile strength and low deformation under load, which enhances the long life span for the pointer. The high impact strength of the material provides the ability to absorb the energy during deformation. It also has good creep resistance which allows the pointer to resist deformation under the influence of mechanical stress. Three through holes are made in the pointer, the diameters are 6.45mm, 2.50mm and 2.50mm.


      Additional Features:
    • High heat deflection temperature
    • Absorbs very little moisture
    • Low frequency material
    • High voltage material
    • Good electrical insulating properties
    • High strength retention at elevated temperature
    • High Tensile
    • Low deformation under load
    • Excellent creep and cold flow resistance
    • Low co-efficient of thermal expansion
    • Good surface finish

      • Technical Specs
      P/N: 46-268418P1 Key Specs
      Item
      COLLIMATOR POINTER, GE-18-AC-01S*, #1121
      OEM
      GE Healthcare
      OEM #
      46-268418P1
      Condition
      New Aftermarket
      Returnable
      Yes
      Warranty
      As Is
      Fitments

      The Pointer is being used as one of the components in X-ray machines. It is made of polycarbonate sheet material, which gives a good surface finish as well as being transparent. It is made using high precision technique, which facilitate good dimensional accuracy. The dimensional accuracy allows the pointer to provide the perfect fit in the assembly as per the requirement. The good mechanical properties of the pointer such as high toughness, impact strength, high tensile strength and low deformation under load, which enhances the long life span for the pointer. The high impact strength of the material provides the ability to absorb the energy during deformation. It also has good creep resistance which allows the pointer to resist deformation under the influence of mechanical stress. Three through holes are made in the pointer, the diameters are 6.45mm, 2.50mm and 2.50mm.


      Additional Features:
    • High heat deflection temperature
    • Absorbs very little moisture
    • Low frequency material
    • High voltage material
    • Good electrical insulating properties
    • High strength retention at elevated temperature
    • High Tensile
    • Low deformation under load
    • Excellent creep and cold flow resistance
    • Low co-efficient of thermal expansion
    • Good surface finish

        • GE Healthcare
          • AMX 4
          • DEFINIUM AMX 700
          • AMX 4 PLUS
        Product Overview

        The Pointer is being used as one of the components in X-ray machines. It is made of polycarbonate sheet material, which gives a good surface finish as well as being transparent. It is made using high precision technique, which facilitate good dimensional accuracy. The dimensional accuracy allows the pointer to provide the perfect fit in the assembly as per the requirement. The good mechanical properties of the pointer such as high toughness, impact strength, high tensile strength and low deformation under load, which enhances the long life span for the pointer. The high impact strength of the material provides the ability to absorb the energy during deformation. It also has good creep resistance which allows the pointer to resist deformation under the influence of mechanical stress. Three through holes are made in the pointer, the diameters are 6.45mm, 2.50mm and 2.50mm.


        Additional Features:
      • High heat deflection temperature
      • Absorbs very little moisture
      • Low frequency material
      • High voltage material
      • Good electrical insulating properties
      • High strength retention at elevated temperature
      • High Tensile
      • Low deformation under load
      • Excellent creep and cold flow resistance
      • Low co-efficient of thermal expansion
      • Good surface finish

        • Technical Specs
        P/N: 46-268418P1 Key Specs
        Item
        COLLIMATOR POINTER, GE-18-AC-01S*, #1121
        OEM
        GE Healthcare
        OEM #
        46-268418P1
        Condition
        New Aftermarket
        Returnable
        Yes
        Warranty
        As Is
        Fitments

        The Pointer is being used as one of the components in X-ray machines. It is made of polycarbonate sheet material, which gives a good surface finish as well as being transparent. It is made using high precision technique, which facilitate good dimensional accuracy. The dimensional accuracy allows the pointer to provide the perfect fit in the assembly as per the requirement. The good mechanical properties of the pointer such as high toughness, impact strength, high tensile strength and low deformation under load, which enhances the long life span for the pointer. The high impact strength of the material provides the ability to absorb the energy during deformation. It also has good creep resistance which allows the pointer to resist deformation under the influence of mechanical stress. Three through holes are made in the pointer, the diameters are 6.45mm, 2.50mm and 2.50mm.


        Additional Features:
      • High heat deflection temperature
      • Absorbs very little moisture
      • Low frequency material
      • High voltage material
      • Good electrical insulating properties
      • High strength retention at elevated temperature
      • High Tensile
      • Low deformation under load
      • Excellent creep and cold flow resistance
      • Low co-efficient of thermal expansion
      • Good surface finish

          • GE Healthcare
            • AMX 4
            • DEFINIUM AMX 700
            • AMX 4 PLUS