OEM#: 6006362New OEM Original Outright

SINGLE INFUSION DEVICE ANALYZER CHANNEL MODULE (IDA-6/M) by Fluke Electronics Corp (Biomedical Div.)

Your price:
$4,811.36 each
$7,636.00 Savings: $2,824.64 (37%)
Ship date will be provided after ordering
HomeFluke Electronics Corp (Biomedical Div.)6006362
SINGLE INFUSION DEVICE ANALYZER CHANNEL MODULE (IDA-6/M) by Fluke Electronics Corp (Biomedical Div.)
SINGLE INFUSION DEVICE ANALYZER CHANNEL MODULE (IDA-6/M) by Fluke Electronics Corp (Biomedical Div.)

OEM#: 6006362
SINGLE INFUSION DEVICE ANALYZER CHANNEL MODULE (IDA-6/M) by Fluke Electronics Corp (Biomedical Div.)

New OEM Original Outright
Your price:
$4,811.36 each
Ship date will be provided after ordering
Asset Information
Option: Single-Channel Module (IDA-6/M)
One-Channel Analyzer (IDA-6/1)
Two-Channel Analyzer (IDA-6/2)
Four-Channel Analyzer (IDA-6/4)
Single-Channel Module (IDA-6/M)
ADD TO LIST
Product Overview

The future of biomedical testing is now: introducing the revolutionary IDA-6 Infusion Device Analyzer, enabled with OneQA workflow automation software to help simplify the biomedical testing process.

The IDA-6 is 100x faster than the IDA-5 and with access to our proprietary OneQA software onboard, testing and documenting results is fully automated saving you valuable time while increasing accuracy. OneQA allows users to customize pre-built procedures on IDA-6, results are automatically saved on the device with the option of syncing to your PC simultaneously. Completing your PMs have been simplified with our intuitive user interface.

IDA-6 Infusion Device Analyzer Key Features

  • OneQA-enabled workflow automation simplifies testing, enhancing accuracy and efficiency
  • Achieve low-flow stable readings 100x faster than IDA-5
  • IntelliPumpTM Technology offers no mess testing with a water recirculation system
  • No priming required between tests or repriming after initial setup
  • Test up to four infusion pumps simultaneously
  • Modular design allows for flexibility; users may add additional channels as needed
  • Removable channels simplify the calibration process and eliminate downtime
  • Fully compliant with IEC60601-2-24 standard
  • Meets or exceeds most OEM low-flow accuracy
  • Enhanced resolution by 60x vs. IDA-5
  • Flow and volume are 100x more accurate vs. IDA-5
  • Simply and quickly customize pre-built test procedures for any infusion device
  • Wireless capability allows you to run test procedures in the field and automatically syncresults
  • Large 10” touchscreen with an intuitive user interface
  • Ability to upload pictures, instructions, and text to procedures
  • Global support network to support customers anywhere, anytime
  • Immediate results with as little as < 0.0003mL
  • Verifies PCA, bolus, and occlusion functionality

    Groundbreaking Infusion Pump Testing Technology
    Experience the future of infusion pump testing with our next-gen IDA-6 Infusion Device Analyzer. This high-tech device offers customization and convenience without complications.

    It’s evolutionary.
    The IDA-6 Infusion Device Analyzer is at the forefront of a new era of innovation in the medical device testing industry. The device is the first-ever Fluke Biomedical device to be OneQA-enabled. Now you can ditch the laptop and seamlessly conduct automated testing directly from the IDA-6. The IDA-6 supports offline mode, allowing you to test without being connected to the internet. When connected, the IDA-6 will automatically sync test results to your PC, making integrating test reports to your CMMS easier, improving traceability, and standardizing your test procedures reducing human error.

    It’s easy.
    Ease of use is a key feature of the IDA-6. We listened to the challenges you face while completing infusion pump testing and developed the IntelliPumpTM Technology for the IDA-6 Infusion Device Analyzer in response. This technology allows users to recirculate water during testing without the need to prime, eliminating unnecessary headaches and complexities. This feature, combined with our user-friendly workflow automation software and intuitive user interface, makes it even easier to set up and complete comprehensive testing in minutes.

    It’s efficient.
    Designed with time-saving capabilities, IDA-6 is engineered with flexibility in mind. The modular design provides more versatility, allowing for each individual channel to be removed for service or calibration. This eliminates downtime during the testing process, meaning you no longer need to send off an entire analyzer for maintenance. Instead, when a channel needs calibration or maintenance, the remaining channels can continue functioning uninterrupted.

    It’s essential.
    The IDA-6 takes medical device testing to a new level of ease and convenience. Testing doesn’t have to be demanding. Our technology makes it simple to get the job done efficiently and accurately, so you and your organization can focus on what you do best: protecting lives. Our products have been entrusted by biomedical professionals worldwide when it comes to infusion pump testing for decades. Bring the ease and power of the IDA-6 Infusion Device Analyzer to your organization today.

    • Technical Specs
    P/N: 6006362 Key Specs
    Item
    SINGLE INFUSION DEVICE ANALYZER CHANNEL MODULE (IDA-6/M)
    OEM
    Fluke Electronics Corp (Biomedical Div.)
    OEM #
    6006362
    Condition
    New OEM Original
    Returnable
    No
    Warranty
    12 Month
    Additional flow uncertainty
    ± ΔP × 0.001 mL/h
    Additional volume uncertainty
    ± (test duration in hours) × ΔP × 0.001 mL
    Atmospheric pressure 70
    70 – 107 kPa, altitude up to 3000 m (10 000 ft)
    Base flow accuracy (after > 0.1 mL)
    ± (1 % + 0.005 mL/h)
    Base flow range
    1 – 100 mL/h
    Bolus and PCA Graphs
    Instant flow with up to 1 s resolution (gradually reduced after 1 hour), numbered boluses
    Bolus duration accuracy
    ± (0.2 % + 0.2 s)
    Bolus duration range
    0 s – 1000 h
    Bolus flow accuracy (after > 0.1 mL and > 10 s)
    ± (1 % + 0.005 mL/h) at < 500 mL/h, otherwise ± 2 %
    Bolus flow range 10 × base flow – 3000 mL/h (steady flow),
    10 × base flow – 3000 mL/h (steady flow), 10 × base flow – 1500 mL/h (peristaltic flow)
    Bolus volume accuracy (after > 1 s)
    ± (2 % + 0.01 mL)
    Bolus volume range
    0.01 – 100 000 mL
    Channels
    1 to 4, depending on configuration
    Connectivity
    1 × USB-C for PC communication, 3 × USB-A for peripherals
    Data storage
    > 10 000 measurements
    Dimensions (w × d × h)
    295 mm × 210 mm × 260 mm (11.6 in × 8.3 in × 10.1 in)
    Display
    10-inch multi-touch, 800 × 600 pixels
    EMC standard
    Complies with IEC 61326-1:2012
    Flow and Volume Graphs
    Instant flow and mean flow with up to 1 s resolution (gradually reduced after 1 hour), IEC 60601-2-24 trumpet curve
    Humidity
    < 90 % relative humidity, non-condensing
    Infusion device standard
    For testing according to IEC 60601-2-24:1998
    Mean flow accuracy (after > 0.1 mL and > 10s)
    ± (1 % + 0.005 mL/h) at < 500 mL/h, otherwise ± 2 %
    Mean flow range
    0 – 3000 mL/h (steady flow), 0 – 1500 mL/h (peristaltic flow)
    Mean flow resolution
    0.001 mL/h
    Occlusion Graphs
    Pressure with up to 50 ms resolution (gradually reduced after 3 minutes)
    Operating temperature
    +15 – +30 °C (+59 – +86 °F)
    Option
    Single-Channel Module (IDA-6/M)
    Peak pressure accuracy
    ± (1 % + 5 mmHg (0.1 psi)), 50 ms moving average
    Peak pressure range
    -200 – +2600 mmHg (-3.8 – +50 psi)
    Peak pressure resolution
    1 mmHg (0.01 psi)
    Power
    19 V DC, 3 A
    Pressure
    mmHg, kPa, psi, bar
    Previous Part Number
    5329817
    Range
    -200 – +600 mmHg (-3.8 – +11.6 psi)
    Residual volume accuracy
    ± (2 % + 0.01 mL)
    Safety standard
    Complies with IEC 61010-1:2010, pollution degree 2
    Storage temperature
    -20 – +70 °C (-4 – +158 °F), when drained
    Time accuracy
    ± (0.2 % + 0.2 s)
    Time range
    0 s – 1000 h
    Time to alarm
    0 s – 1000 h
    Time to alarm accuracy
    Operator dependent, manual stop button
    Time to peak accuracy
    ± (0.2 % + 0.05 s)
    Time to peak range
    0 s – 1000 h
    Time trig volume
    ≤ 3 μL
    Volume
    mL, g (1 mL = 0.998 g)
    Volume accuracy (after > 0.1 mL and > 10s)
    ± (1 % + 0.003 mL) at < 500 mL/h, otherwise ± 2 %
    Volume range
    0 – 100 000 mL
    Volume resolution
    0.001 mL
    Weight
    3.8 kg (8.4 pounds)
    Equivalents
    Fitments

    The future of biomedical testing is now: introducing the revolutionary IDA-6 Infusion Device Analyzer, enabled with OneQA workflow automation software to help simplify the biomedical testing process.

    The IDA-6 is 100x faster than the IDA-5 and with access to our proprietary OneQA software onboard, testing and documenting results is fully automated saving you valuable time while increasing accuracy. OneQA allows users to customize pre-built procedures on IDA-6, results are automatically saved on the device with the option of syncing to your PC simultaneously. Completing your PMs have been simplified with our intuitive user interface.

    IDA-6 Infusion Device Analyzer Key Features

  • OneQA-enabled workflow automation simplifies testing, enhancing accuracy and efficiency
  • Achieve low-flow stable readings 100x faster than IDA-5
  • IntelliPumpTM Technology offers no mess testing with a water recirculation system
  • No priming required between tests or repriming after initial setup
  • Test up to four infusion pumps simultaneously
  • Modular design allows for flexibility; users may add additional channels as needed
  • Removable channels simplify the calibration process and eliminate downtime
  • Fully compliant with IEC60601-2-24 standard
  • Meets or exceeds most OEM low-flow accuracy
  • Enhanced resolution by 60x vs. IDA-5
  • Flow and volume are 100x more accurate vs. IDA-5
  • Simply and quickly customize pre-built test procedures for any infusion device
  • Wireless capability allows you to run test procedures in the field and automatically syncresults
  • Large 10” touchscreen with an intuitive user interface
  • Ability to upload pictures, instructions, and text to procedures
  • Global support network to support customers anywhere, anytime
  • Immediate results with as little as < 0.0003mL
  • Verifies PCA, bolus, and occlusion functionality

    Groundbreaking Infusion Pump Testing Technology
    Experience the future of infusion pump testing with our next-gen IDA-6 Infusion Device Analyzer. This high-tech device offers customization and convenience without complications.

    It’s evolutionary.
    The IDA-6 Infusion Device Analyzer is at the forefront of a new era of innovation in the medical device testing industry. The device is the first-ever Fluke Biomedical device to be OneQA-enabled. Now you can ditch the laptop and seamlessly conduct automated testing directly from the IDA-6. The IDA-6 supports offline mode, allowing you to test without being connected to the internet. When connected, the IDA-6 will automatically sync test results to your PC, making integrating test reports to your CMMS easier, improving traceability, and standardizing your test procedures reducing human error.

    It’s easy.
    Ease of use is a key feature of the IDA-6. We listened to the challenges you face while completing infusion pump testing and developed the IntelliPumpTM Technology for the IDA-6 Infusion Device Analyzer in response. This technology allows users to recirculate water during testing without the need to prime, eliminating unnecessary headaches and complexities. This feature, combined with our user-friendly workflow automation software and intuitive user interface, makes it even easier to set up and complete comprehensive testing in minutes.

    It’s efficient.
    Designed with time-saving capabilities, IDA-6 is engineered with flexibility in mind. The modular design provides more versatility, allowing for each individual channel to be removed for service or calibration. This eliminates downtime during the testing process, meaning you no longer need to send off an entire analyzer for maintenance. Instead, when a channel needs calibration or maintenance, the remaining channels can continue functioning uninterrupted.

    It’s essential.
    The IDA-6 takes medical device testing to a new level of ease and convenience. Testing doesn’t have to be demanding. Our technology makes it simple to get the job done efficiently and accurately, so you and your organization can focus on what you do best: protecting lives. Our products have been entrusted by biomedical professionals worldwide when it comes to infusion pump testing for decades. Bring the ease and power of the IDA-6 Infusion Device Analyzer to your organization today.

    • 5329817: Fluke Electronics Corp (Biomedical Div.): Item Replacement
    • Fluke Electronics Corp (Biomedical Div.)
      • IDA-6
    Product Overview

    The future of biomedical testing is now: introducing the revolutionary IDA-6 Infusion Device Analyzer, enabled with OneQA workflow automation software to help simplify the biomedical testing process.

    The IDA-6 is 100x faster than the IDA-5 and with access to our proprietary OneQA software onboard, testing and documenting results is fully automated saving you valuable time while increasing accuracy. OneQA allows users to customize pre-built procedures on IDA-6, results are automatically saved on the device with the option of syncing to your PC simultaneously. Completing your PMs have been simplified with our intuitive user interface.

    IDA-6 Infusion Device Analyzer Key Features

  • OneQA-enabled workflow automation simplifies testing, enhancing accuracy and efficiency
  • Achieve low-flow stable readings 100x faster than IDA-5
  • IntelliPumpTM Technology offers no mess testing with a water recirculation system
  • No priming required between tests or repriming after initial setup
  • Test up to four infusion pumps simultaneously
  • Modular design allows for flexibility; users may add additional channels as needed
  • Removable channels simplify the calibration process and eliminate downtime
  • Fully compliant with IEC60601-2-24 standard
  • Meets or exceeds most OEM low-flow accuracy
  • Enhanced resolution by 60x vs. IDA-5
  • Flow and volume are 100x more accurate vs. IDA-5
  • Simply and quickly customize pre-built test procedures for any infusion device
  • Wireless capability allows you to run test procedures in the field and automatically syncresults
  • Large 10” touchscreen with an intuitive user interface
  • Ability to upload pictures, instructions, and text to procedures
  • Global support network to support customers anywhere, anytime
  • Immediate results with as little as < 0.0003mL
  • Verifies PCA, bolus, and occlusion functionality

    Groundbreaking Infusion Pump Testing Technology
    Experience the future of infusion pump testing with our next-gen IDA-6 Infusion Device Analyzer. This high-tech device offers customization and convenience without complications.

    It’s evolutionary.
    The IDA-6 Infusion Device Analyzer is at the forefront of a new era of innovation in the medical device testing industry. The device is the first-ever Fluke Biomedical device to be OneQA-enabled. Now you can ditch the laptop and seamlessly conduct automated testing directly from the IDA-6. The IDA-6 supports offline mode, allowing you to test without being connected to the internet. When connected, the IDA-6 will automatically sync test results to your PC, making integrating test reports to your CMMS easier, improving traceability, and standardizing your test procedures reducing human error.

    It’s easy.
    Ease of use is a key feature of the IDA-6. We listened to the challenges you face while completing infusion pump testing and developed the IntelliPumpTM Technology for the IDA-6 Infusion Device Analyzer in response. This technology allows users to recirculate water during testing without the need to prime, eliminating unnecessary headaches and complexities. This feature, combined with our user-friendly workflow automation software and intuitive user interface, makes it even easier to set up and complete comprehensive testing in minutes.

    It’s efficient.
    Designed with time-saving capabilities, IDA-6 is engineered with flexibility in mind. The modular design provides more versatility, allowing for each individual channel to be removed for service or calibration. This eliminates downtime during the testing process, meaning you no longer need to send off an entire analyzer for maintenance. Instead, when a channel needs calibration or maintenance, the remaining channels can continue functioning uninterrupted.

    It’s essential.
    The IDA-6 takes medical device testing to a new level of ease and convenience. Testing doesn’t have to be demanding. Our technology makes it simple to get the job done efficiently and accurately, so you and your organization can focus on what you do best: protecting lives. Our products have been entrusted by biomedical professionals worldwide when it comes to infusion pump testing for decades. Bring the ease and power of the IDA-6 Infusion Device Analyzer to your organization today.

    • Technical Specs
    P/N: 6006362 Key Specs
    Item
    SINGLE INFUSION DEVICE ANALYZER CHANNEL MODULE (IDA-6/M)
    OEM
    Fluke Electronics Corp (Biomedical Div.)
    OEM #
    6006362
    Condition
    New OEM Original
    Returnable
    No
    Warranty
    12 Month
    Additional flow uncertainty
    ± ΔP × 0.001 mL/h
    Additional volume uncertainty
    ± (test duration in hours) × ΔP × 0.001 mL
    Atmospheric pressure 70
    70 – 107 kPa, altitude up to 3000 m (10 000 ft)
    Base flow accuracy (after > 0.1 mL)
    ± (1 % + 0.005 mL/h)
    Base flow range
    1 – 100 mL/h
    Bolus and PCA Graphs
    Instant flow with up to 1 s resolution (gradually reduced after 1 hour), numbered boluses
    Bolus duration accuracy
    ± (0.2 % + 0.2 s)
    Bolus duration range
    0 s – 1000 h
    Bolus flow accuracy (after > 0.1 mL and > 10 s)
    ± (1 % + 0.005 mL/h) at < 500 mL/h, otherwise ± 2 %
    Bolus flow range 10 × base flow – 3000 mL/h (steady flow),
    10 × base flow – 3000 mL/h (steady flow), 10 × base flow – 1500 mL/h (peristaltic flow)
    Bolus volume accuracy (after > 1 s)
    ± (2 % + 0.01 mL)
    Bolus volume range
    0.01 – 100 000 mL
    Channels
    1 to 4, depending on configuration
    Connectivity
    1 × USB-C for PC communication, 3 × USB-A for peripherals
    Data storage
    > 10 000 measurements
    Dimensions (w × d × h)
    295 mm × 210 mm × 260 mm (11.6 in × 8.3 in × 10.1 in)
    Display
    10-inch multi-touch, 800 × 600 pixels
    EMC standard
    Complies with IEC 61326-1:2012
    Flow and Volume Graphs
    Instant flow and mean flow with up to 1 s resolution (gradually reduced after 1 hour), IEC 60601-2-24 trumpet curve
    Humidity
    < 90 % relative humidity, non-condensing
    Infusion device standard
    For testing according to IEC 60601-2-24:1998
    Mean flow accuracy (after > 0.1 mL and > 10s)
    ± (1 % + 0.005 mL/h) at < 500 mL/h, otherwise ± 2 %
    Mean flow range
    0 – 3000 mL/h (steady flow), 0 – 1500 mL/h (peristaltic flow)
    Mean flow resolution
    0.001 mL/h
    Occlusion Graphs
    Pressure with up to 50 ms resolution (gradually reduced after 3 minutes)
    Operating temperature
    +15 – +30 °C (+59 – +86 °F)
    Option
    Single-Channel Module (IDA-6/M)
    Peak pressure accuracy
    ± (1 % + 5 mmHg (0.1 psi)), 50 ms moving average
    Peak pressure range
    -200 – +2600 mmHg (-3.8 – +50 psi)
    Peak pressure resolution
    1 mmHg (0.01 psi)
    Power
    19 V DC, 3 A
    Pressure
    mmHg, kPa, psi, bar
    Previous Part Number
    5329817
    Range
    -200 – +600 mmHg (-3.8 – +11.6 psi)
    Residual volume accuracy
    ± (2 % + 0.01 mL)
    Safety standard
    Complies with IEC 61010-1:2010, pollution degree 2
    Storage temperature
    -20 – +70 °C (-4 – +158 °F), when drained
    Time accuracy
    ± (0.2 % + 0.2 s)
    Time range
    0 s – 1000 h
    Time to alarm
    0 s – 1000 h
    Time to alarm accuracy
    Operator dependent, manual stop button
    Time to peak accuracy
    ± (0.2 % + 0.05 s)
    Time to peak range
    0 s – 1000 h
    Time trig volume
    ≤ 3 μL
    Volume
    mL, g (1 mL = 0.998 g)
    Volume accuracy (after > 0.1 mL and > 10s)
    ± (1 % + 0.003 mL) at < 500 mL/h, otherwise ± 2 %
    Volume range
    0 – 100 000 mL
    Volume resolution
    0.001 mL
    Weight
    3.8 kg (8.4 pounds)
    Equivalents
    Fitments

    The future of biomedical testing is now: introducing the revolutionary IDA-6 Infusion Device Analyzer, enabled with OneQA workflow automation software to help simplify the biomedical testing process.

    The IDA-6 is 100x faster than the IDA-5 and with access to our proprietary OneQA software onboard, testing and documenting results is fully automated saving you valuable time while increasing accuracy. OneQA allows users to customize pre-built procedures on IDA-6, results are automatically saved on the device with the option of syncing to your PC simultaneously. Completing your PMs have been simplified with our intuitive user interface.

    IDA-6 Infusion Device Analyzer Key Features

  • OneQA-enabled workflow automation simplifies testing, enhancing accuracy and efficiency
  • Achieve low-flow stable readings 100x faster than IDA-5
  • IntelliPumpTM Technology offers no mess testing with a water recirculation system
  • No priming required between tests or repriming after initial setup
  • Test up to four infusion pumps simultaneously
  • Modular design allows for flexibility; users may add additional channels as needed
  • Removable channels simplify the calibration process and eliminate downtime
  • Fully compliant with IEC60601-2-24 standard
  • Meets or exceeds most OEM low-flow accuracy
  • Enhanced resolution by 60x vs. IDA-5
  • Flow and volume are 100x more accurate vs. IDA-5
  • Simply and quickly customize pre-built test procedures for any infusion device
  • Wireless capability allows you to run test procedures in the field and automatically syncresults
  • Large 10” touchscreen with an intuitive user interface
  • Ability to upload pictures, instructions, and text to procedures
  • Global support network to support customers anywhere, anytime
  • Immediate results with as little as < 0.0003mL
  • Verifies PCA, bolus, and occlusion functionality

    Groundbreaking Infusion Pump Testing Technology
    Experience the future of infusion pump testing with our next-gen IDA-6 Infusion Device Analyzer. This high-tech device offers customization and convenience without complications.

    It’s evolutionary.
    The IDA-6 Infusion Device Analyzer is at the forefront of a new era of innovation in the medical device testing industry. The device is the first-ever Fluke Biomedical device to be OneQA-enabled. Now you can ditch the laptop and seamlessly conduct automated testing directly from the IDA-6. The IDA-6 supports offline mode, allowing you to test without being connected to the internet. When connected, the IDA-6 will automatically sync test results to your PC, making integrating test reports to your CMMS easier, improving traceability, and standardizing your test procedures reducing human error.

    It’s easy.
    Ease of use is a key feature of the IDA-6. We listened to the challenges you face while completing infusion pump testing and developed the IntelliPumpTM Technology for the IDA-6 Infusion Device Analyzer in response. This technology allows users to recirculate water during testing without the need to prime, eliminating unnecessary headaches and complexities. This feature, combined with our user-friendly workflow automation software and intuitive user interface, makes it even easier to set up and complete comprehensive testing in minutes.

    It’s efficient.
    Designed with time-saving capabilities, IDA-6 is engineered with flexibility in mind. The modular design provides more versatility, allowing for each individual channel to be removed for service or calibration. This eliminates downtime during the testing process, meaning you no longer need to send off an entire analyzer for maintenance. Instead, when a channel needs calibration or maintenance, the remaining channels can continue functioning uninterrupted.

    It’s essential.
    The IDA-6 takes medical device testing to a new level of ease and convenience. Testing doesn’t have to be demanding. Our technology makes it simple to get the job done efficiently and accurately, so you and your organization can focus on what you do best: protecting lives. Our products have been entrusted by biomedical professionals worldwide when it comes to infusion pump testing for decades. Bring the ease and power of the IDA-6 Infusion Device Analyzer to your organization today.

    • 5329817: Fluke Electronics Corp (Biomedical Div.): Item Replacement
    • Fluke Electronics Corp (Biomedical Div.)
      • IDA-6
    Product Overview

    The future of biomedical testing is now: introducing the revolutionary IDA-6 Infusion Device Analyzer, enabled with OneQA workflow automation software to help simplify the biomedical testing process.

    The IDA-6 is 100x faster than the IDA-5 and with access to our proprietary OneQA software onboard, testing and documenting results is fully automated saving you valuable time while increasing accuracy. OneQA allows users to customize pre-built procedures on IDA-6, results are automatically saved on the device with the option of syncing to your PC simultaneously. Completing your PMs have been simplified with our intuitive user interface.

    IDA-6 Infusion Device Analyzer Key Features

  • OneQA-enabled workflow automation simplifies testing, enhancing accuracy and efficiency
  • Achieve low-flow stable readings 100x faster than IDA-5
  • IntelliPumpTM Technology offers no mess testing with a water recirculation system
  • No priming required between tests or repriming after initial setup
  • Test up to four infusion pumps simultaneously
  • Modular design allows for flexibility; users may add additional channels as needed
  • Removable channels simplify the calibration process and eliminate downtime
  • Fully compliant with IEC60601-2-24 standard
  • Meets or exceeds most OEM low-flow accuracy
  • Enhanced resolution by 60x vs. IDA-5
  • Flow and volume are 100x more accurate vs. IDA-5
  • Simply and quickly customize pre-built test procedures for any infusion device
  • Wireless capability allows you to run test procedures in the field and automatically syncresults
  • Large 10” touchscreen with an intuitive user interface
  • Ability to upload pictures, instructions, and text to procedures
  • Global support network to support customers anywhere, anytime
  • Immediate results with as little as < 0.0003mL
  • Verifies PCA, bolus, and occlusion functionality

    Groundbreaking Infusion Pump Testing Technology
    Experience the future of infusion pump testing with our next-gen IDA-6 Infusion Device Analyzer. This high-tech device offers customization and convenience without complications.

    It’s evolutionary.
    The IDA-6 Infusion Device Analyzer is at the forefront of a new era of innovation in the medical device testing industry. The device is the first-ever Fluke Biomedical device to be OneQA-enabled. Now you can ditch the laptop and seamlessly conduct automated testing directly from the IDA-6. The IDA-6 supports offline mode, allowing you to test without being connected to the internet. When connected, the IDA-6 will automatically sync test results to your PC, making integrating test reports to your CMMS easier, improving traceability, and standardizing your test procedures reducing human error.

    It’s easy.
    Ease of use is a key feature of the IDA-6. We listened to the challenges you face while completing infusion pump testing and developed the IntelliPumpTM Technology for the IDA-6 Infusion Device Analyzer in response. This technology allows users to recirculate water during testing without the need to prime, eliminating unnecessary headaches and complexities. This feature, combined with our user-friendly workflow automation software and intuitive user interface, makes it even easier to set up and complete comprehensive testing in minutes.

    It’s efficient.
    Designed with time-saving capabilities, IDA-6 is engineered with flexibility in mind. The modular design provides more versatility, allowing for each individual channel to be removed for service or calibration. This eliminates downtime during the testing process, meaning you no longer need to send off an entire analyzer for maintenance. Instead, when a channel needs calibration or maintenance, the remaining channels can continue functioning uninterrupted.

    It’s essential.
    The IDA-6 takes medical device testing to a new level of ease and convenience. Testing doesn’t have to be demanding. Our technology makes it simple to get the job done efficiently and accurately, so you and your organization can focus on what you do best: protecting lives. Our products have been entrusted by biomedical professionals worldwide when it comes to infusion pump testing for decades. Bring the ease and power of the IDA-6 Infusion Device Analyzer to your organization today.

    • Technical Specs
    P/N: 6006362 Key Specs
    Item
    SINGLE INFUSION DEVICE ANALYZER CHANNEL MODULE (IDA-6/M)
    OEM
    Fluke Electronics Corp (Biomedical Div.)
    OEM #
    6006362
    Condition
    New OEM Original
    Returnable
    No
    Warranty
    12 Month
    Additional flow uncertainty
    ± ΔP × 0.001 mL/h
    Additional volume uncertainty
    ± (test duration in hours) × ΔP × 0.001 mL
    Atmospheric pressure 70
    70 – 107 kPa, altitude up to 3000 m (10 000 ft)
    Base flow accuracy (after > 0.1 mL)
    ± (1 % + 0.005 mL/h)
    Base flow range
    1 – 100 mL/h
    Bolus and PCA Graphs
    Instant flow with up to 1 s resolution (gradually reduced after 1 hour), numbered boluses
    Bolus duration accuracy
    ± (0.2 % + 0.2 s)
    Bolus duration range
    0 s – 1000 h
    Bolus flow accuracy (after > 0.1 mL and > 10 s)
    ± (1 % + 0.005 mL/h) at < 500 mL/h, otherwise ± 2 %
    Bolus flow range 10 × base flow – 3000 mL/h (steady flow),
    10 × base flow – 3000 mL/h (steady flow), 10 × base flow – 1500 mL/h (peristaltic flow)
    Bolus volume accuracy (after > 1 s)
    ± (2 % + 0.01 mL)
    Bolus volume range
    0.01 – 100 000 mL
    Channels
    1 to 4, depending on configuration
    Connectivity
    1 × USB-C for PC communication, 3 × USB-A for peripherals
    Data storage
    > 10 000 measurements
    Dimensions (w × d × h)
    295 mm × 210 mm × 260 mm (11.6 in × 8.3 in × 10.1 in)
    Display
    10-inch multi-touch, 800 × 600 pixels
    EMC standard
    Complies with IEC 61326-1:2012
    Flow and Volume Graphs
    Instant flow and mean flow with up to 1 s resolution (gradually reduced after 1 hour), IEC 60601-2-24 trumpet curve
    Humidity
    < 90 % relative humidity, non-condensing
    Infusion device standard
    For testing according to IEC 60601-2-24:1998
    Mean flow accuracy (after > 0.1 mL and > 10s)
    ± (1 % + 0.005 mL/h) at < 500 mL/h, otherwise ± 2 %
    Mean flow range
    0 – 3000 mL/h (steady flow), 0 – 1500 mL/h (peristaltic flow)
    Mean flow resolution
    0.001 mL/h
    Occlusion Graphs
    Pressure with up to 50 ms resolution (gradually reduced after 3 minutes)
    Operating temperature
    +15 – +30 °C (+59 – +86 °F)
    Option
    Single-Channel Module (IDA-6/M)
    Peak pressure accuracy
    ± (1 % + 5 mmHg (0.1 psi)), 50 ms moving average
    Peak pressure range
    -200 – +2600 mmHg (-3.8 – +50 psi)
    Peak pressure resolution
    1 mmHg (0.01 psi)
    Power
    19 V DC, 3 A
    Pressure
    mmHg, kPa, psi, bar
    Previous Part Number
    5329817
    Range
    -200 – +600 mmHg (-3.8 – +11.6 psi)
    Residual volume accuracy
    ± (2 % + 0.01 mL)
    Safety standard
    Complies with IEC 61010-1:2010, pollution degree 2
    Storage temperature
    -20 – +70 °C (-4 – +158 °F), when drained
    Time accuracy
    ± (0.2 % + 0.2 s)
    Time range
    0 s – 1000 h
    Time to alarm
    0 s – 1000 h
    Time to alarm accuracy
    Operator dependent, manual stop button
    Time to peak accuracy
    ± (0.2 % + 0.05 s)
    Time to peak range
    0 s – 1000 h
    Time trig volume
    ≤ 3 μL
    Volume
    mL, g (1 mL = 0.998 g)
    Volume accuracy (after > 0.1 mL and > 10s)
    ± (1 % + 0.003 mL) at < 500 mL/h, otherwise ± 2 %
    Volume range
    0 – 100 000 mL
    Volume resolution
    0.001 mL
    Weight
    3.8 kg (8.4 pounds)
    Equivalents
    Fitments

    The future of biomedical testing is now: introducing the revolutionary IDA-6 Infusion Device Analyzer, enabled with OneQA workflow automation software to help simplify the biomedical testing process.

    The IDA-6 is 100x faster than the IDA-5 and with access to our proprietary OneQA software onboard, testing and documenting results is fully automated saving you valuable time while increasing accuracy. OneQA allows users to customize pre-built procedures on IDA-6, results are automatically saved on the device with the option of syncing to your PC simultaneously. Completing your PMs have been simplified with our intuitive user interface.

    IDA-6 Infusion Device Analyzer Key Features

  • OneQA-enabled workflow automation simplifies testing, enhancing accuracy and efficiency
  • Achieve low-flow stable readings 100x faster than IDA-5
  • IntelliPumpTM Technology offers no mess testing with a water recirculation system
  • No priming required between tests or repriming after initial setup
  • Test up to four infusion pumps simultaneously
  • Modular design allows for flexibility; users may add additional channels as needed
  • Removable channels simplify the calibration process and eliminate downtime
  • Fully compliant with IEC60601-2-24 standard
  • Meets or exceeds most OEM low-flow accuracy
  • Enhanced resolution by 60x vs. IDA-5
  • Flow and volume are 100x more accurate vs. IDA-5
  • Simply and quickly customize pre-built test procedures for any infusion device
  • Wireless capability allows you to run test procedures in the field and automatically syncresults
  • Large 10” touchscreen with an intuitive user interface
  • Ability to upload pictures, instructions, and text to procedures
  • Global support network to support customers anywhere, anytime
  • Immediate results with as little as < 0.0003mL
  • Verifies PCA, bolus, and occlusion functionality

    Groundbreaking Infusion Pump Testing Technology
    Experience the future of infusion pump testing with our next-gen IDA-6 Infusion Device Analyzer. This high-tech device offers customization and convenience without complications.

    It’s evolutionary.
    The IDA-6 Infusion Device Analyzer is at the forefront of a new era of innovation in the medical device testing industry. The device is the first-ever Fluke Biomedical device to be OneQA-enabled. Now you can ditch the laptop and seamlessly conduct automated testing directly from the IDA-6. The IDA-6 supports offline mode, allowing you to test without being connected to the internet. When connected, the IDA-6 will automatically sync test results to your PC, making integrating test reports to your CMMS easier, improving traceability, and standardizing your test procedures reducing human error.

    It’s easy.
    Ease of use is a key feature of the IDA-6. We listened to the challenges you face while completing infusion pump testing and developed the IntelliPumpTM Technology for the IDA-6 Infusion Device Analyzer in response. This technology allows users to recirculate water during testing without the need to prime, eliminating unnecessary headaches and complexities. This feature, combined with our user-friendly workflow automation software and intuitive user interface, makes it even easier to set up and complete comprehensive testing in minutes.

    It’s efficient.
    Designed with time-saving capabilities, IDA-6 is engineered with flexibility in mind. The modular design provides more versatility, allowing for each individual channel to be removed for service or calibration. This eliminates downtime during the testing process, meaning you no longer need to send off an entire analyzer for maintenance. Instead, when a channel needs calibration or maintenance, the remaining channels can continue functioning uninterrupted.

    It’s essential.
    The IDA-6 takes medical device testing to a new level of ease and convenience. Testing doesn’t have to be demanding. Our technology makes it simple to get the job done efficiently and accurately, so you and your organization can focus on what you do best: protecting lives. Our products have been entrusted by biomedical professionals worldwide when it comes to infusion pump testing for decades. Bring the ease and power of the IDA-6 Infusion Device Analyzer to your organization today.

    • 5329817: Fluke Electronics Corp (Biomedical Div.): Item Replacement
    • Fluke Electronics Corp (Biomedical Div.)
      • IDA-6