Replaces Desco 19240New Aftermarket Outright

TESTER, WRIST STRAP

Your price:
$164.00 eachEstimated to ship by 12/27 if ordered before 6:30 PM EST
HomeDesco19240
BUYING OPTIONS:
New Aftermarket
Outright Purchase
$164.00 each
Warranty: As Is
New OEM Original
Outright Purchase
$195.64 each
Warranty: Mfr Warranty
TESTER, WRIST STRAP
TESTER, WRIST STRAP

Replaces Desco 19240
TESTER, WRIST STRAP

New Aftermarket Outright
Your price:
$164.00 each
Estimated to ship by 12/27 if ordered before 6:30 PM EST
Asset Information
ADD TO LIST
Product Overview

ANSI/ESD S20.20, test equipment is required to enact the Compliance Verification Plan Requirement. Test equipment shall be selected to make measurements of appropriate properties of the technical requirements that are incorporated into the ESD program plan. The Wrist Strap Tester can be used to fulfill ANSI/ESD S1.1, “The wrist strap system should be tested daily to ensure proper electrical value” (Annex A3). Being a portable battery powered tool, it is perfect for small labs or for a supervisor to spotcheck workers and/or ensure compliance. The Wrist Strap Tester is a battery operated “on demand” wrist strap tester. When the wearer of a wrist strap plugs in their coil cord and touches the metallic surface of the Wrist Strap Tester, a path for current flow is completed from the wearer’s skin, through the wrist strap. This action will cause the green “test good” LED to illuminate as long as the resistance of the circuit path is between 750 kilohms and 10 megohms.

  • Fit the wristband snugly onto your wrist
  • Snap the wrist cord to the wristband
  • Plug the wrist cord into the Wrist Strap Tester
  • Push and hold the test button until the test results are displayed
  • An audible alarm will sound if the test fails. Verify that your wrist strap is being worn correctly or needs to be replaced

Technical Specs
P/N: 19240 Key Specs
Item
TESTER, WRIST STRAP
OEM
Desco
OEM #
19240
Condition
New Aftermarket
Returnable
No
Warranty
As Is
Battery Type
Alkaline Battery
Operating Temperature
32 °F - 104 °F (0 - 40 °C)
Test Accuracy
±20%
Test Volts
4 V
Volts
9 V

ANSI/ESD S20.20, test equipment is required to enact the Compliance Verification Plan Requirement. Test equipment shall be selected to make measurements of appropriate properties of the technical requirements that are incorporated into the ESD program plan. The Wrist Strap Tester can be used to fulfill ANSI/ESD S1.1, “The wrist strap system should be tested daily to ensure proper electrical value” (Annex A3). Being a portable battery powered tool, it is perfect for small labs or for a supervisor to spotcheck workers and/or ensure compliance. The Wrist Strap Tester is a battery operated “on demand” wrist strap tester. When the wearer of a wrist strap plugs in their coil cord and touches the metallic surface of the Wrist Strap Tester, a path for current flow is completed from the wearer’s skin, through the wrist strap. This action will cause the green “test good” LED to illuminate as long as the resistance of the circuit path is between 750 kilohms and 10 megohms.

  • Fit the wristband snugly onto your wrist
  • Snap the wrist cord to the wristband
  • Plug the wrist cord into the Wrist Strap Tester
  • Push and hold the test button until the test results are displayed
  • An audible alarm will sound if the test fails. Verify that your wrist strap is being worn correctly or needs to be replaced

    Product Overview

    ANSI/ESD S20.20, test equipment is required to enact the Compliance Verification Plan Requirement. Test equipment shall be selected to make measurements of appropriate properties of the technical requirements that are incorporated into the ESD program plan. The Wrist Strap Tester can be used to fulfill ANSI/ESD S1.1, “The wrist strap system should be tested daily to ensure proper electrical value” (Annex A3). Being a portable battery powered tool, it is perfect for small labs or for a supervisor to spotcheck workers and/or ensure compliance. The Wrist Strap Tester is a battery operated “on demand” wrist strap tester. When the wearer of a wrist strap plugs in their coil cord and touches the metallic surface of the Wrist Strap Tester, a path for current flow is completed from the wearer’s skin, through the wrist strap. This action will cause the green “test good” LED to illuminate as long as the resistance of the circuit path is between 750 kilohms and 10 megohms.

    • Fit the wristband snugly onto your wrist
    • Snap the wrist cord to the wristband
    • Plug the wrist cord into the Wrist Strap Tester
    • Push and hold the test button until the test results are displayed
    • An audible alarm will sound if the test fails. Verify that your wrist strap is being worn correctly or needs to be replaced

    Technical Specs
    P/N: 19240 Key Specs
    Item
    TESTER, WRIST STRAP
    OEM
    Desco
    OEM #
    19240
    Condition
    New Aftermarket
    Returnable
    No
    Warranty
    As Is
    Battery Type
    Alkaline Battery
    Operating Temperature
    32 °F - 104 °F (0 - 40 °C)
    Test Accuracy
    ±20%
    Test Volts
    4 V
    Volts
    9 V

    ANSI/ESD S20.20, test equipment is required to enact the Compliance Verification Plan Requirement. Test equipment shall be selected to make measurements of appropriate properties of the technical requirements that are incorporated into the ESD program plan. The Wrist Strap Tester can be used to fulfill ANSI/ESD S1.1, “The wrist strap system should be tested daily to ensure proper electrical value” (Annex A3). Being a portable battery powered tool, it is perfect for small labs or for a supervisor to spotcheck workers and/or ensure compliance. The Wrist Strap Tester is a battery operated “on demand” wrist strap tester. When the wearer of a wrist strap plugs in their coil cord and touches the metallic surface of the Wrist Strap Tester, a path for current flow is completed from the wearer’s skin, through the wrist strap. This action will cause the green “test good” LED to illuminate as long as the resistance of the circuit path is between 750 kilohms and 10 megohms.

    • Fit the wristband snugly onto your wrist
    • Snap the wrist cord to the wristband
    • Plug the wrist cord into the Wrist Strap Tester
    • Push and hold the test button until the test results are displayed
    • An audible alarm will sound if the test fails. Verify that your wrist strap is being worn correctly or needs to be replaced

      Product Overview

      ANSI/ESD S20.20, test equipment is required to enact the Compliance Verification Plan Requirement. Test equipment shall be selected to make measurements of appropriate properties of the technical requirements that are incorporated into the ESD program plan. The Wrist Strap Tester can be used to fulfill ANSI/ESD S1.1, “The wrist strap system should be tested daily to ensure proper electrical value” (Annex A3). Being a portable battery powered tool, it is perfect for small labs or for a supervisor to spotcheck workers and/or ensure compliance. The Wrist Strap Tester is a battery operated “on demand” wrist strap tester. When the wearer of a wrist strap plugs in their coil cord and touches the metallic surface of the Wrist Strap Tester, a path for current flow is completed from the wearer’s skin, through the wrist strap. This action will cause the green “test good” LED to illuminate as long as the resistance of the circuit path is between 750 kilohms and 10 megohms.

      • Fit the wristband snugly onto your wrist
      • Snap the wrist cord to the wristband
      • Plug the wrist cord into the Wrist Strap Tester
      • Push and hold the test button until the test results are displayed
      • An audible alarm will sound if the test fails. Verify that your wrist strap is being worn correctly or needs to be replaced

      Technical Specs
      P/N: 19240 Key Specs
      Item
      TESTER, WRIST STRAP
      OEM
      Desco
      OEM #
      19240
      Condition
      New Aftermarket
      Returnable
      No
      Warranty
      As Is
      Battery Type
      Alkaline Battery
      Operating Temperature
      32 °F - 104 °F (0 - 40 °C)
      Test Accuracy
      ±20%
      Test Volts
      4 V
      Volts
      9 V

      ANSI/ESD S20.20, test equipment is required to enact the Compliance Verification Plan Requirement. Test equipment shall be selected to make measurements of appropriate properties of the technical requirements that are incorporated into the ESD program plan. The Wrist Strap Tester can be used to fulfill ANSI/ESD S1.1, “The wrist strap system should be tested daily to ensure proper electrical value” (Annex A3). Being a portable battery powered tool, it is perfect for small labs or for a supervisor to spotcheck workers and/or ensure compliance. The Wrist Strap Tester is a battery operated “on demand” wrist strap tester. When the wearer of a wrist strap plugs in their coil cord and touches the metallic surface of the Wrist Strap Tester, a path for current flow is completed from the wearer’s skin, through the wrist strap. This action will cause the green “test good” LED to illuminate as long as the resistance of the circuit path is between 750 kilohms and 10 megohms.

      • Fit the wristband snugly onto your wrist
      • Snap the wrist cord to the wristband
      • Plug the wrist cord into the Wrist Strap Tester
      • Push and hold the test button until the test results are displayed
      • An audible alarm will sound if the test fails. Verify that your wrist strap is being worn correctly or needs to be replaced