Replaces Datex-Ohmeda 6600-1248-500New Aftermarket Outright

CORNER GROMMET

Your price:
$11.55 each
$16.71 Savings: $5.16 (31%)
Estimated to ship by 12/25 if ordered before 4:30 PM EST
HomeDatex-Ohmeda66001248500
BUYING OPTIONS:
New Aftermarket
Outright Purchase
$11.55 each
Warranty: As Is
New OEM Original
Outright Purchase
$17.70 each
Warranty: 90 Day
CORNER GROMMET
CORNER GROMMET

Replaces Datex-Ohmeda 6600-1248-500
CORNER GROMMET

New Aftermarket Outright
Your price:
$11.55 each
$16.71 Savings: $5.16 (31%)
Ready to shipReady to Ship
Estimated to ship by 12/25 if ordered before 4:30 PM EST
Asset Information
ADD TO LIST
Product Overview

The Grommet Corner - Giraffe™ Hybrid Giraffe™ Incubator, is used in the incubator chamber end panel to inlet the connected tubes, monitoring probe, feeding tubes and other leads. The grommet corner is fixed at the four corners of Incubator chamber front and rear end panels. It is made of highly flexible vinyl material that has a plasticizer type (DOTP). It is a sub-component of Giraffe™ OmniBed incubators and acts as an inlet for connecting life support tubes, probe leads, feeding tubes. Due to excellent flexibility and conducive chemical properties of the Geon™ HC vinyl material, the grommet corner is safe to use in environments for life support. These are being used in UL Voluson P8, Giraffe™ Carestation Incubator, ARC Aespire 7900, MIC Giraffe™ OmniBed, MIC Giraffe™ Incubator, MIC Giraffe™ Warmer, ARC Aisys, ARC Aestiva 7100, MIC - Other Infant Care, MIC Panda™ iRES Warmer, ARC Light Monitor and MIC Giraffe™ OmniBed.


Additional Features:
  • Exceptional resistance to flame, chemicals and light
  • Resistant to tear and abrasions
  • Enhanced durability
  • Compact and flexible design for clinical support
  • Complies to USP Class VI and gamma stable grades
  • Approved by safety agencies FDA, USP, UL, NSF, US consumer product safety commission and European commission

    • Technical Specs
    P/N: 6600-1248-500 Key Specs
    Item
    CORNER GROMMET
    OEM
    Datex-Ohmeda
    OEM #
    6600-1248-500
    Condition
    New Aftermarket
    Returnable
    No
    Warranty
    As Is
    Material
    Translucent Thermoplastic Rubber
    Equivalents
    Fitments

    The Grommet Corner - Giraffe™ Hybrid Giraffe™ Incubator, is used in the incubator chamber end panel to inlet the connected tubes, monitoring probe, feeding tubes and other leads. The grommet corner is fixed at the four corners of Incubator chamber front and rear end panels. It is made of highly flexible vinyl material that has a plasticizer type (DOTP). It is a sub-component of Giraffe™ OmniBed incubators and acts as an inlet for connecting life support tubes, probe leads, feeding tubes. Due to excellent flexibility and conducive chemical properties of the Geon™ HC vinyl material, the grommet corner is safe to use in environments for life support. These are being used in UL Voluson P8, Giraffe™ Carestation Incubator, ARC Aespire 7900, MIC Giraffe™ OmniBed, MIC Giraffe™ Incubator, MIC Giraffe™ Warmer, ARC Aisys, ARC Aestiva 7100, MIC - Other Infant Care, MIC Panda™ iRES Warmer, ARC Light Monitor and MIC Giraffe™ OmniBed.


    Additional Features:
  • Exceptional resistance to flame, chemicals and light
  • Resistant to tear and abrasions
  • Enhanced durability
  • Compact and flexible design for clinical support
  • Complies to USP Class VI and gamma stable grades
  • Approved by safety agencies FDA, USP, UL, NSF, US consumer product safety commission and European commission

    • 6600-1248-500: GE Healthcare: Canonical Redirect
    • OMG017: Replacement Parts Industries (RPI): Canonical Redirect
    • Datex-Ohmeda
      • GIRAFFE
      • GIRAFFE OMNIBED
      • GIRAFFE INFANT INCUBATOR
    Product Overview

    The Grommet Corner - Giraffe™ Hybrid Giraffe™ Incubator, is used in the incubator chamber end panel to inlet the connected tubes, monitoring probe, feeding tubes and other leads. The grommet corner is fixed at the four corners of Incubator chamber front and rear end panels. It is made of highly flexible vinyl material that has a plasticizer type (DOTP). It is a sub-component of Giraffe™ OmniBed incubators and acts as an inlet for connecting life support tubes, probe leads, feeding tubes. Due to excellent flexibility and conducive chemical properties of the Geon™ HC vinyl material, the grommet corner is safe to use in environments for life support. These are being used in UL Voluson P8, Giraffe™ Carestation Incubator, ARC Aespire 7900, MIC Giraffe™ OmniBed, MIC Giraffe™ Incubator, MIC Giraffe™ Warmer, ARC Aisys, ARC Aestiva 7100, MIC - Other Infant Care, MIC Panda™ iRES Warmer, ARC Light Monitor and MIC Giraffe™ OmniBed.


    Additional Features:
  • Exceptional resistance to flame, chemicals and light
  • Resistant to tear and abrasions
  • Enhanced durability
  • Compact and flexible design for clinical support
  • Complies to USP Class VI and gamma stable grades
  • Approved by safety agencies FDA, USP, UL, NSF, US consumer product safety commission and European commission

    • Technical Specs
    P/N: 6600-1248-500 Key Specs
    Item
    CORNER GROMMET
    OEM
    Datex-Ohmeda
    OEM #
    6600-1248-500
    Condition
    New Aftermarket
    Returnable
    No
    Warranty
    As Is
    Material
    Translucent Thermoplastic Rubber
    Equivalents
    Fitments

    The Grommet Corner - Giraffe™ Hybrid Giraffe™ Incubator, is used in the incubator chamber end panel to inlet the connected tubes, monitoring probe, feeding tubes and other leads. The grommet corner is fixed at the four corners of Incubator chamber front and rear end panels. It is made of highly flexible vinyl material that has a plasticizer type (DOTP). It is a sub-component of Giraffe™ OmniBed incubators and acts as an inlet for connecting life support tubes, probe leads, feeding tubes. Due to excellent flexibility and conducive chemical properties of the Geon™ HC vinyl material, the grommet corner is safe to use in environments for life support. These are being used in UL Voluson P8, Giraffe™ Carestation Incubator, ARC Aespire 7900, MIC Giraffe™ OmniBed, MIC Giraffe™ Incubator, MIC Giraffe™ Warmer, ARC Aisys, ARC Aestiva 7100, MIC - Other Infant Care, MIC Panda™ iRES Warmer, ARC Light Monitor and MIC Giraffe™ OmniBed.


    Additional Features:
  • Exceptional resistance to flame, chemicals and light
  • Resistant to tear and abrasions
  • Enhanced durability
  • Compact and flexible design for clinical support
  • Complies to USP Class VI and gamma stable grades
  • Approved by safety agencies FDA, USP, UL, NSF, US consumer product safety commission and European commission

    • 6600-1248-500: GE Healthcare: Canonical Redirect
    • OMG017: Replacement Parts Industries (RPI): Canonical Redirect
    • Datex-Ohmeda
      • GIRAFFE
      • GIRAFFE OMNIBED
      • GIRAFFE INFANT INCUBATOR
    Product Overview

    The Grommet Corner - Giraffe™ Hybrid Giraffe™ Incubator, is used in the incubator chamber end panel to inlet the connected tubes, monitoring probe, feeding tubes and other leads. The grommet corner is fixed at the four corners of Incubator chamber front and rear end panels. It is made of highly flexible vinyl material that has a plasticizer type (DOTP). It is a sub-component of Giraffe™ OmniBed incubators and acts as an inlet for connecting life support tubes, probe leads, feeding tubes. Due to excellent flexibility and conducive chemical properties of the Geon™ HC vinyl material, the grommet corner is safe to use in environments for life support. These are being used in UL Voluson P8, Giraffe™ Carestation Incubator, ARC Aespire 7900, MIC Giraffe™ OmniBed, MIC Giraffe™ Incubator, MIC Giraffe™ Warmer, ARC Aisys, ARC Aestiva 7100, MIC - Other Infant Care, MIC Panda™ iRES Warmer, ARC Light Monitor and MIC Giraffe™ OmniBed.


    Additional Features:
  • Exceptional resistance to flame, chemicals and light
  • Resistant to tear and abrasions
  • Enhanced durability
  • Compact and flexible design for clinical support
  • Complies to USP Class VI and gamma stable grades
  • Approved by safety agencies FDA, USP, UL, NSF, US consumer product safety commission and European commission

    • Technical Specs
    P/N: 6600-1248-500 Key Specs
    Item
    CORNER GROMMET
    OEM
    Datex-Ohmeda
    OEM #
    6600-1248-500
    Condition
    New Aftermarket
    Returnable
    No
    Warranty
    As Is
    Material
    Translucent Thermoplastic Rubber
    Equivalents
    Fitments

    The Grommet Corner - Giraffe™ Hybrid Giraffe™ Incubator, is used in the incubator chamber end panel to inlet the connected tubes, monitoring probe, feeding tubes and other leads. The grommet corner is fixed at the four corners of Incubator chamber front and rear end panels. It is made of highly flexible vinyl material that has a plasticizer type (DOTP). It is a sub-component of Giraffe™ OmniBed incubators and acts as an inlet for connecting life support tubes, probe leads, feeding tubes. Due to excellent flexibility and conducive chemical properties of the Geon™ HC vinyl material, the grommet corner is safe to use in environments for life support. These are being used in UL Voluson P8, Giraffe™ Carestation Incubator, ARC Aespire 7900, MIC Giraffe™ OmniBed, MIC Giraffe™ Incubator, MIC Giraffe™ Warmer, ARC Aisys, ARC Aestiva 7100, MIC - Other Infant Care, MIC Panda™ iRES Warmer, ARC Light Monitor and MIC Giraffe™ OmniBed.


    Additional Features:
  • Exceptional resistance to flame, chemicals and light
  • Resistant to tear and abrasions
  • Enhanced durability
  • Compact and flexible design for clinical support
  • Complies to USP Class VI and gamma stable grades
  • Approved by safety agencies FDA, USP, UL, NSF, US consumer product safety commission and European commission

    • 6600-1248-500: GE Healthcare: Canonical Redirect
    • OMG017: Replacement Parts Industries (RPI): Canonical Redirect
    • Datex-Ohmeda
      • GIRAFFE
      • GIRAFFE OMNIBED
      • GIRAFFE INFANT INCUBATOR