Sign InRegister
Departments
Solutions
PRO
Browsing History
Main Menu
Batteries
Biomedical
Cables & Sensors
Computers & Electronics
Facilities & Workspaces
Laboratory
Lighting & Bulbs
Medical Imaging
Minor Equipment
On-Site Service
Repair
Training
Shop by OEM
Shop by Model
Main Menu
Provider
Supplier
Government
Partners
GPOs
Resources
About
Main Menu
About PartsSource PRO
On-Demand Parts
On-Demand Service
Repair & Service Agreements
Main Menu
My Account
Orders
Parts Quotes
Depot Repairs & Quotes
On-Site Service
Submit Work Orders
Exchanges & Returns
Settings
Main Menu
Month over Month Spend
Prior Rebates
Main Menu
My Lists
Create New List
OEM#: 6600-0330-501New OEM Original Outright
TUBING ACCESS COVER LIGHT GRAY by Datex-Ohmeda
Your price:
$73.92 eachEstimated to ship by 11/25 if ordered before 4:00 PM EST
OEM#: 6600-0330-501TUBING ACCESS COVER LIGHT GRAY by Datex-Ohmeda
New OEM Original Outright
Your price:
$73.92 each
Estimated to ship by 11/25 if ordered before 4:00 PM EST
Asset Information
Drop Shipped From GE - Not For Export Out Of US
ADD TO LIST
Product Overview
The Tubing Access Cover is a component that is made of an Ethylene Propylene Diene Monomer (EPDM) material, which has a high insulation property as well as low electrical conductivity. The cover has high resistance to UV-Rays and fluids like steam and water. Its high flexibility and elongation properties provide an easy installation on the hood in the incubator. It can withstand the wide range of temperatures from -29° C to 177° C. This cover is being used in the incubator and provides the easy access to the tubing. This tubing cover is installed on both side of the hood in the incubator. It is very helpful to route the patient probe cord and place the patient probe inside the incubator. It is also used to route the wire from the left side tube accessing cover and plug the probe connector into the side of the controller. One of the major advantages of this tube access cover is to monitor the leads and carefully guide any tubes in the incubator. The tube or the sensor cable is routed out of the hood through one of the tubing access covers.
Additional Features:
Features
- High resistance to UV rays
- High stability in low temperature
- Can withstand the temperature range (-29° C to 177° C)
- High insulation property
Technical Specs
P/N: 6600-0330-501 Key Specs
Item
TUBING ACCESS COVER LIGHT GRAY
OEM
Datex-Ohmeda
OEM #
6600-0330-501
Condition
New OEM Original
Returnable
No
Warranty
90 Day
Color
Light Gray
Equivalents
The Tubing Access Cover is a component that is made of an Ethylene Propylene Diene Monomer (EPDM) material, which has a high insulation property as well as low electrical conductivity. The cover has high resistance to UV-Rays and fluids like steam and water. Its high flexibility and elongation properties provide an easy installation on the hood in the incubator. It can withstand the wide range of temperatures from -29° C to 177° C. This cover is being used in the incubator and provides the easy access to the tubing. This tubing cover is installed on both side of the hood in the incubator. It is very helpful to route the patient probe cord and place the patient probe inside the incubator. It is also used to route the wire from the left side tube accessing cover and plug the probe connector into the side of the controller. One of the major advantages of this tube access cover is to monitor the leads and carefully guide any tubes in the incubator. The tube or the sensor cable is routed out of the hood through one of the tubing access covers.
Additional Features:
- 6600-0330-501: GE Healthcare: Canonical Redirect
Product Overview
The Tubing Access Cover is a component that is made of an Ethylene Propylene Diene Monomer (EPDM) material, which has a high insulation property as well as low electrical conductivity. The cover has high resistance to UV-Rays and fluids like steam and water. Its high flexibility and elongation properties provide an easy installation on the hood in the incubator. It can withstand the wide range of temperatures from -29° C to 177° C. This cover is being used in the incubator and provides the easy access to the tubing. This tubing cover is installed on both side of the hood in the incubator. It is very helpful to route the patient probe cord and place the patient probe inside the incubator. It is also used to route the wire from the left side tube accessing cover and plug the probe connector into the side of the controller. One of the major advantages of this tube access cover is to monitor the leads and carefully guide any tubes in the incubator. The tube or the sensor cable is routed out of the hood through one of the tubing access covers.
Additional Features:
Features
- High resistance to UV rays
- High stability in low temperature
- Can withstand the temperature range (-29° C to 177° C)
- High insulation property
Technical Specs
P/N: 6600-0330-501 Key Specs
Item
TUBING ACCESS COVER LIGHT GRAY
OEM
Datex-Ohmeda
OEM #
6600-0330-501
Condition
New OEM Original
Returnable
No
Warranty
90 Day
Color
Light Gray
Equivalents
The Tubing Access Cover is a component that is made of an Ethylene Propylene Diene Monomer (EPDM) material, which has a high insulation property as well as low electrical conductivity. The cover has high resistance to UV-Rays and fluids like steam and water. Its high flexibility and elongation properties provide an easy installation on the hood in the incubator. It can withstand the wide range of temperatures from -29° C to 177° C. This cover is being used in the incubator and provides the easy access to the tubing. This tubing cover is installed on both side of the hood in the incubator. It is very helpful to route the patient probe cord and place the patient probe inside the incubator. It is also used to route the wire from the left side tube accessing cover and plug the probe connector into the side of the controller. One of the major advantages of this tube access cover is to monitor the leads and carefully guide any tubes in the incubator. The tube or the sensor cable is routed out of the hood through one of the tubing access covers.
Additional Features:
- 6600-0330-501: GE Healthcare: Canonical Redirect
Product Overview
The Tubing Access Cover is a component that is made of an Ethylene Propylene Diene Monomer (EPDM) material, which has a high insulation property as well as low electrical conductivity. The cover has high resistance to UV-Rays and fluids like steam and water. Its high flexibility and elongation properties provide an easy installation on the hood in the incubator. It can withstand the wide range of temperatures from -29° C to 177° C. This cover is being used in the incubator and provides the easy access to the tubing. This tubing cover is installed on both side of the hood in the incubator. It is very helpful to route the patient probe cord and place the patient probe inside the incubator. It is also used to route the wire from the left side tube accessing cover and plug the probe connector into the side of the controller. One of the major advantages of this tube access cover is to monitor the leads and carefully guide any tubes in the incubator. The tube or the sensor cable is routed out of the hood through one of the tubing access covers.
Additional Features:
Features
- High resistance to UV rays
- High stability in low temperature
- Can withstand the temperature range (-29° C to 177° C)
- High insulation property
How can we
improve our item listing
?Technical Specs
P/N: 6600-0330-501 Key Specs
Item
TUBING ACCESS COVER LIGHT GRAY
OEM
Datex-Ohmeda
OEM #
6600-0330-501
Condition
New OEM Original
Returnable
No
Warranty
90 Day
Color
Light Gray
Equivalents
The Tubing Access Cover is a component that is made of an Ethylene Propylene Diene Monomer (EPDM) material, which has a high insulation property as well as low electrical conductivity. The cover has high resistance to UV-Rays and fluids like steam and water. Its high flexibility and elongation properties provide an easy installation on the hood in the incubator. It can withstand the wide range of temperatures from -29° C to 177° C. This cover is being used in the incubator and provides the easy access to the tubing. This tubing cover is installed on both side of the hood in the incubator. It is very helpful to route the patient probe cord and place the patient probe inside the incubator. It is also used to route the wire from the left side tube accessing cover and plug the probe connector into the side of the controller. One of the major advantages of this tube access cover is to monitor the leads and carefully guide any tubes in the incubator. The tube or the sensor cable is routed out of the hood through one of the tubing access covers.
Additional Features:
- 6600-0330-501: GE Healthcare: Canonical Redirect